The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Ionic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers
Abstract
Solid-state electrolytes provide substantial improvements to safety and electrochemical stability in lithium-ion batteries when compared with conventional liquid electrolytes, which makes them a promising alternative technology for next-generation high-energy batteries. Currently, the low mobility of lithium ions in solid electrolytes limits their practical application. The ongoing research over the past few decades on dispersing of ceramic nanoparticles into polymer matrix has been proved effective to enhance ionic conductivity although it is challenging to form the efficiency networks of ionic conduction with nanoparticles. In this work, we first report that ceramic nanowire fillers can facilitate formation of such ionic conduction networks in polymer-based solid electrolyte to enhance its ionic conductivity by three orders of magnitude. Polyacrylonitrile-LiClO4 incorporated with 15 wt % Li0.33La0.557TiO3 nanowire composite electrolyte exhibits an unprecedented ionic conductivity of 2.4 × 10(-4) S cm(-1) at room temperature, which is attributed to the fast ion transport on the surfaces of ceramic nanowires acting as conductive network in the polymer matrix. In addition, the ceramic-nanowire filled composite polymer electrolyte shows an enlarged electrochemical stability window in comparison to the one without fillers. The discovery in the present work paves the way for the design of solid ion electrolytes with superior performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Nanoparticle Polymer Composites: Where Two Small Worlds Meet
Balazs, A. C., Emrick, T., & Russell, T. P. (2006) · Science · doi:10.1126/science.1130557 · Cited by 2,593
Designing nanostructured Si anodes for high energy lithium ion batteries
Wu, H., & Cui, Y. (2012) · Nano Today · doi:10.1016/j.nantod.2012.08.004 · Cited by 2,350
Self-citationElectrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Liquan, C., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,598
Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
Review on gel polymer electrolytes for lithium batteries
Manuel Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,422
Seino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Ceramic and polymeric solid electrolytes for lithium-ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.01.076 · Cited by 1,172
Progress and prospective of solid-state lithium batteries
Takada, K. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.034 · Cited by 1,056
Review on composite polymer electrolytes for lithium batteries
Manuel Stephan, A., & Nahm, K. S. (2006) · Polymer · doi:10.1016/j.polymer.2006.05.069 · Cited by 971
Lithium Lanthanum Titanates: A Review
Stramare, S., Thangadurai, V., & Weppner, W. (2003) · Chemistry of Materials · doi:10.1021/cm0300516 · Cited by 898
Anomalous High Ionic Conductivity of Nanoporous β-Li3PS4
Liu, Z., Fu, W., Payzant, E. A., Yu, X., Wu, Z., Dudney, N. J., Kiggans, J., Hong, K., Rondinone, A. J., & Liang, C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3110895 · Cited by 879
Challenges for rechargeable batteries
Goodenough, J. B., & Kim, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.074 · Cited by 636
Composite polyether based solid electrolytes
Wieczorek, W., Florjanczyk, Z., & Stevens, J. R. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00172-b · Cited by 373
Enhancement of ion transport in polymer electrolytes by addition of nanoscale inorganic oxides
Chung, S. H., Wang, Y., Persi, L., Croce, F., Greenbaum, S. G., Scrosati, B., & Plichta, E. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00748-0 · Cited by 313
Li, X., & Hsu, S. L. (1984) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1984.180220715 · Cited by 311
Impedance study of (PEO)10LiClO4–Al2O3 composite polymer electrolyte with blocking electrodes
Qian, X., Gu, N., Cheng, Z., Yang, X., Wang, E., & Dong, S. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00723-4 · Cited by 299
Croce, F., Focarete, M. L., Hassoun, J., Meschini, I., & Scrosati, B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00348d · Cited by 258
Polymer-ceramic composite electrolytes
Kumar, B., & Scanlon, L. G. (1994) · Journal of Power Sources · doi:10.1016/0378-7753(94)02147-3 · Cited by 243
Investigation on dielectric relaxations of PVP–NH4SCN polymer electrolyte
Ramya, C. S., Selvasekarapandian, S., Hirankumar, G., Savitha, T., & Angelo, P. C. (2007) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2007.08.038 · Cited by 226
Electrochemical characteristics of two types of PEO-based composite electrolyte with functional SiO2
Kim, J.-W., Ji, K., Lee, J.-P., & Park, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00263-5 · Cited by 126
Cited by
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Gür, T. M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01419a · Cited by 2,566
Polymer Electrolytes for Lithium-Based Batteries: Advances and Prospects
Zhou, D., Shanmukaraj, D., Tkacheva, A., Armand, M., & Wang, G. (2019) · Chem · doi:10.1016/j.chempr.2019.05.009 · Cited by 1,539
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Metadata
- Authors
- Liu, W., Liu, N., Sun, J., Hsu, P.-C., Li, Y., Lee, H.-W., & Cui, Y.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-19
- Volume
- 15
- Issue
- 4
- Pages
- 2740-2745
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2028037840
- Cited by
- 1,001
- References
- 23
- FWCI
- 29.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.