The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
High Chloride Doping Levels Stabilize the Perovskite Phase of Cesium Lead Iodide
Abstract
Cesium lead iodide possesses an excellent combination of band gap and absorption coefficient for photovoltaic applications in its perovskite phase. However, this is not its equilibrium structure under ambient conditions. In air, at ambient temperature it rapidly transforms to a nonfunctional, so-called yellow phase. Here we show that chloride doping, particularly at levels near the solubility limit for chloride in a cesium lead iodide host, provides a new approach to stabilizing the functional perovskite phase. In order to achieve high doping levels, we first co-deposit colloidal nanocrystals of pure cesium lead chloride and cesium lead iodide, thereby ensuring nanometer-scale mixing even at compositions that potentially exceed the bulk miscibility of the two phases. The resulting nanocrystal solid is subsequently fused into a polycrystalline thin film by chemically induced, room-temperature sintering. Spectroscopy and X-ray diffraction indicate that the chloride is further dispersed during sintering and a polycrystalline mixed phase is formed. Using density functional theory (DFT) methods in conjunction with nudged elastic band techniques, low-energy pathways for interstitial chlorine diffusion into a majority-iodide lattice were identified, consistent with the facile diffusion and fast halide exchange reactions observed. By comparison to DFT-calculated values (with the PBE exchange-correlation functional), the relative change in band gap and the lattice contraction are shown to be consistent with a Cl/I ratio of a few percent in the mixed phase. At these incorporation levels, the half-life of the functional perovskite phase in a humid atmosphere increases by more than an order of magnitude.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
A climbing image nudged elastic band method for finding saddle points and minimum energy paths
Henkelman, G., Uberuaga, B. P., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1329672 · Cited by 21,620
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Henkelman, G., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1323224 · Cited by 9,523
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Cited by
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Thermodynamically stabilized β-CsPbI 3 –based perovskite solar cells with efficiencies >18%
Wang, Y., Dar, M. I., Ono, L. K., Zhang, T., Kan, M., Li, Y., Zhang, L., Wang, X., Yang, Y., Gao, X., et al. (2019) · Science · doi:10.1126/science.aav8680 · Cited by 1,249
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Doping Lanthanide into Perovskite Nanocrystals: Highly Improved and Expanded Optical Properties
Pan, G., Bai, X., Yang, D., Chen, X., Jing, P., Qu, S., Zhang, L., Zhou, D., Zhu, J., Xu, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b04575 · Cited by 935
Zou, S., Liu, Y., Li, J., Liu, C., Feng, R., Jiang, F., Li, Y., Song, J., Zeng, H., Hong, M., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04000 · Cited by 854
Thermochromic halide perovskite solar cells
Lin, J., Lai, M., Dou, L., Kley, C. S., Chen, H., Peng, F., Sun, J., Lu, D., Hawks, S. A., Xie, C., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0006-0 · Cited by 853
Essentially Trap-Free CsPbBr3 Colloidal Nanocrystals by Postsynthetic Thiocyanate Surface Treatment
Koscher, B. A., Swabeck, J. K., Bronstein, N. D., & Alivisatos, A. P. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02817 · Cited by 844
Saidaminov, M. I., Kim, J., Jain, A., Quintero-Bermudez, R., Tan, H., Long, G., Tan, F., Johnston, A., Zhao, Y., Voznyy, O., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0192-2 · Cited by 751
Li, X., Cao, F., Yu, D., Chen, J., Sun, Z., Shen, Y., Zhu, Y., Wang, L., Wei, Y., Wu, Y., et al. (2017) · Small · doi:10.1002/smll.201603996 · Cited by 704
Wang, P., Zhang, X., Zhou, Y., Jiang, Q., Ye, Q., Chu, Z., Li, X., Yang, X., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-04636-4 · Cited by 637
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Synthesis and Photocatalytic Application of Stable Lead‐Free Cs2AgBiBr6 Perovskite Nanocrystals
Zhou, L., Xu, Y., Chen, B., Kuang, D., & Su, C. (2018) · Small · doi:10.1002/smll.201703762 · Cited by 581
Xiang, W., Liu, S. (., & Tress, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00157d · Cited by 386
Self-citationFluorescent Alloy CsPbxMn1–xI3 Perovskite Nanocrystals with High Structural and Optical Stability
Akkerman, Q. A., Meggiolaro, D., Dang, Z., De Angelis, F., & Manna, L. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00707 · Cited by 368
Inorganic CsPbI3 Perovskite‐Based Solar Cells: A Choice for a Tandem Device
Ahmad, W., Khan, J., Niu, G., & Tang, J. (2017) · Solar RRL · doi:10.1002/solr.201700048 · Cited by 350
Stabilization of Black Perovskite Phase in FAPbI3 and CsPbI3
Masi, S., Gualdrón-Reyes, A. F., & Mora-Seró, I. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00801 · Cited by 347
Meyns, M., Perálvarez, M., Heuer-Jungemann, A., Hertog, W., Ibáñez, M., Nafria, R., Genç, A., Arbiol, J., Kovalenko, M. V., Carreras, J., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02529 · Cited by 332
Metal Halide Perovskites in Quantum Dot Solar Cells: Progress and Prospects
Yuan, J., Hazarika, A., Zhao, Q., Ling, X., Moot, T., Ma, W., & Luther, J. M. (2020) · Joule · doi:10.1016/j.joule.2020.04.006 · Cited by 307
Short‐Chain Ligand‐Passivated Stable α‐CsPbI3 Quantum Dot for All‐Inorganic Perovskite Solar Cells
Chen, K., Zhong, Q., Chen, W., Sang, B., Wang, Y., Yang, T., Liu, Y., Zhang, Y., & Zhang, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900991 · Cited by 302
Hossain, M. K., Mohammed, M. K. A., Pandey, R., Arnab, A. A., Rubel, M. H. K., Hossain, K. M., Ali, M. H., Rahman, M. F., Bencherif, H., Madan, J., et al. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00035 · Cited by 301
Quantitative Phase-Change Thermodynamics and Metastability of Perovskite-Phase Cesium Lead Iodide
Dastidar, S., Hawley, C. J., Dillon, A. D., Gutierrez-Perez, A. D., Spanier, J. E., & Fafarman, A. T. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00134 · Cited by 268
Self-citationStabilizing the cubic perovskite phase of CsPbI3 nanocrystals by using an alkyl phosphinic acid
Wang, C., Chesman, A. S. R., & Jasieniak, J. J. (2017) · Chemical Communications · doi:10.1039/c6cc08282c · Cited by 263
Waleed, A., Tavakoli, M. M., Gu, L., Hussain, S., Zhang, D., Poddar, S., Wang, Z., Zhang, R., & Fan, Z. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02101 · Cited by 262
Wu, T., Wang, Y., Dai, Z., Cui, D., Wang, T., Meng, X., Bi, E., Yang, X., & Han, L. (2019) · Advanced Materials · doi:10.1002/adma.201900605 · Cited by 257
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Metadata
- Authors
- Dastidar, S., Egger, D. A., Tan, L. Z., Cromer, S. B., Dillon, A. D., Liu, S., Kronik, L., Rappe, A. M., & Fafarman, A. T.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-05-13
- Volume
- 16
- Issue
- 6
- Pages
- 3563-3570
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2347149592
- Cited by
- 290
- References
- 58
- FWCI
- 18.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.