Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 35 of the 38 references it cites were found in a registry or an index; 3 of the 19 sources its claims cite were checked for support.

Integration of Semiconductor Nanowire Lasers with Polymeric Waveguide Devices on a Mechanically Flexible Substrate

Abstract

Nanowire lasers are integrated with planar waveguide devices using a high positional accuracy microtransfer printing technique. Direct nanowire to waveguide coupling is demonstrated, with coupling losses as low as -17 dB, dominated by mode mismatch between the structures. Coupling is achieved using both end-fire coupling into a waveguide facet, and from nanowire lasers printed directly onto the top surface of the waveguide. In-waveguide peak powers up to 11.8 μW are demonstrated. Basic photonic integrated circuit functions such as power splitting and wavelength multiplexing are presented. Finally, devices are fabricated on a mechanically flexible substrate to demonstrate robust coupling between the on-chip laser source and waveguides under significant deformation of the system.

Overview

CoChat Summary

TL;DR

This paper demonstrates hybrid integration of InP nanowire (NW) lasers with SU-8 polymer waveguides on a flexible glass substrate using nanoscale transfer printing. It shows both facet and lateral coupling, with coupling losses as low as -17 dB and output remaining robust under bending to a 1.6 cm radius of curvature.

Key findings

  • Direct NW-to-waveguide coupling was demonstrated in two geometries: lateral coupling and end-to-end facet coupling.
  • Measured coupling efficiencies were 0.7% (-21.5 dB) for lateral coupling and 1.9% (-17.2 dB) for facet coupling.
  • The integrated waveguides delivered peak powers of 4.2 µW (lateral) and 11.8 µW (facet) from the NW lasers.
  • A flexible substrate test showed only ~5% variation in measured output power down to a bend radius of 1.6 cm, the mechanical fracture limit of the substrate in these measurements.

Methods

  • InP NW lasers with room-temperature lasing in the ~840–900 nm range were fabricated and then integrated onto pre-fabricated SU-8 polymer waveguides on 30 µm-thick flexible glass.
  • The authors used a nanoscale transfer-printing (nano-TP) method to place pretested NW lasers either on top of waveguides (lateral coupling) or aligned to waveguide facets (facet coupling); they also built a 2×1 Y-junction and a two-laser single-waveguide device.
  • Optical characterization used a µ-photoluminescence setup with a 532 nm, 1.6 ns pulsed Nd:YAG laser at 10 kHz and compared waveguide output at the facet with calibration measurements from NWs printed at a substrate edge.

Limitations

  • The paper states that the reported coupling efficiencies are dominated by spatial mode mismatch between the NW lasers and the polymer waveguides.
  • The bending experiment was limited to 1.6 cm radius of curvature because the substrate fractured below that radius.
  • Evident from the text: the coupling efficiencies are modest, so while integration is demonstrated, the system still requires improved mode matching for stronger performance.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acs.nanolett.7b02178

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

3 Valid · 0 Not valid · 7 Not checked · 33 Own results and interpretations

25 more claims

Create a free account to see all 43 claims and to verify the 3 references still open.

See all claims — free account
  • Probably not a substantial claim. 5
  • It may state two separate claims as one. 11

Create a free account to see these claims.

Citations

Cites

Cited by

See all 61

Metadata

Authors
Jevtics, D., Hurtado, A., Guilhabert, B., McPhillimy, J., Cantarella, G., Gao, Q., Tan, H. H., Jagadish, C., Strain, M. J., & Dawson, M. D.
Affiliations
  • University of Strathclyde (GB)
  • Australian National University (AU)
Corresponding author
Hurtado, Antonio
Venue
Nano Letters
Published
2017-09-21
Volume
17
Issue
10
Pages
5990-5994
ISSN
  • 1530-6984 (ISSN-L)
  • 1530-6992
OpenAlex
W2751268857
Cited by
61
References
38
Citations by year
2026: 2 · 2025: 3 · 2024: 3 · 2023: 4 · 2022: 10 · 2021: 9 · 2020: 13 · 2019: 7 · 2018: 8 · 2017: 1
FWCI
3.58
Type
journal article
Language
en
Open access
closed
Locations
  • Nano Letters (publishedVersion)
  • PubMed (publishedVersion)
  • Strathprints: The University of Strathclyde institutional repository (University of Strathclyde) (acceptedVersion)
  • ANU Open Research (Australian National University) (submittedVersion)
Funders
  • Engineering and Physical Sciences Research Council (Doctoral Training Partnership)
  • Australian Research Council
  • University of Strathclyde
Topics
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Nanowire Synthesis and Applications
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor Lasers and Optical Devices
Keywords
semiconductor nanowire lasers, polymer waveguides, mode mismatch, end-fire coupling, flexible substrates, photonic integrated circuits, power splitting, wavelength multiplexing, mechanical deformation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.