The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Porous Al Current Collector for Dendrite-Free Na Metal Anodes
Abstract
Na-based batteries are proposed as promising energy storage candidates for beyond Li-ion technology due to the higher natural earth of Na metal. For its high capacity and low potential, Na metal may carve itself a niche when directly used as anodes. Similar to or even more problematic than Li, however, uneven plating/stripping of Na leads to dendrite formation. As the plating substrates, current collectors have a paramount influence on the Na plating/stripping behaviors. Here we propose porous Al current collectors as the plating substrate to suppress Na dendrites. Al does not alloy with Na. It is advantageous over Cu current collectors in terms of cost and weight. The interconnected porous structure can increase available surface for Na to nucleate and decrease the Na + flux distribution, leading to homogeneous plating. The Na metal anodes can run for over 1000 cycles on porous Al with a low and stable voltage hysteresis and their average plating/stripping Coulombic efficiency was above 99.9%, which is greatly improved compared to planar Al. We used the porous Al for Na–O 2, Na–Na 3 V 2 (PO 4 ) 3 cells with low Na amount and anode free Na–TiS 2 batteries and anticipate that using this strategy can be combined with further electrolyte and cathodes to develop high performance Na-based batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Expanded graphite as superior anode for sodium-ion batteries
Wen, Y., He, K., Zhu, Y., Han, F., Xu, Y., Matsuda, I., Ishii, Y., Cumings, J., & Wang, C. (2014) · Nature Communications · doi:10.1038/ncomms5033 · Cited by 1,894
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Studies of Lithium Intercalation into Carbons Using Nonaqueous Electrochemical Cells
Fong, R., von Sacken, U., & Dahn, J. R. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086855 · Cited by 1,452
Na-Ion Battery Anodes: Materials and Electrochemistry
Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00482 · Cited by 1,081
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
A Highly Reversible Room-Temperature Sodium Metal Anode
Seh, Z. W., Sun, J., Sun, Y., & Cui, Y. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00328 · Cited by 979
Electrochemical intercalation of sodium in NaxCoO2 bronzes
DELMAS, C., BRACONNIER, J., FOUASSIER, C., & HAGENMULLER, P. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90076-x · Cited by 903
Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries
Jian, Z., Zhao, L., Pan, H., Hu, Y.-S., Li, H., Chen, W., & Chen, L. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.11.009 · Cited by 804
A rechargeable room-temperature sodium superoxide (NaO2) battery
Hartmann, P., Bender, C. L., Vračar, M., Dürr, A. K., Garsuch, A., Janek, J., & Adelhelm, P. (2013) · Nature Materials · doi:10.1038/nmat3486 · Cited by 786
High temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Komaba, S., Ishikawa, T., Yabuuchi, N., Murata, W., Ito, A., & Ohsawa, Y. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200973k · Cited by 713
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Review—Hard Carbon Negative Electrode Materials for Sodium-Ion Batteries
Irisarri, E., Ponrouch, A., & Palacin, M. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091514jes · Cited by 629
Negative electrodes for Na-ion batteries
Dahbi, M., Yabuuchi, N., Kubota, K., Tokiwa, K., & Komaba, S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00826j · Cited by 623
High‐Capacity Anode Materials for Sodium‐Ion Batteries
Kim, Y., Ha, K., Oh, S. M., & Lee, K. T. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402511 · Cited by 595
A stable room-temperature sodium–sulfur battery
Wei, S., Xu, S., Agrawral, A., Choudhury, S., Lu, Y., Tu, Z., Ma, L., & Archer, L. A. (2016) · Nature Communications · doi:10.1038/ncomms11722 · Cited by 589
Li, Y., Yang, Z., Xu, S., Mu, L., Gu, L., Hu, Y., Li, H., & Chen, L. (2015) · Advanced Science · doi:10.1002/advs.201500031 · Cited by 423
Ultrathin Surface Coating Enables the Stable Sodium Metal Anode
Luo, W., Lin, C., Zhao, O., Noked, M., Zhang, Y., Rubloff, G. W., & Hu, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601526 · Cited by 380
Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries
Zhang, K., Lee, G., Park, M., Li, W., & Kang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600811 · Cited by 345
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Graphite-Encapsulated Li-Metal Hybrid Anodes for High-Capacity Li Batteries
Sun, Y., Zheng, G., Seh, Z. W., Liu, N., Wang, S., Sun, J., Lee, H. R., & Cui, Y. (2016) · Chem · doi:10.1016/j.chempr.2016.07.009 · Cited by 305
Yoon, G., Kim, H., Park, I., & Kang, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601519 · Cited by 299
The critical role of phase-transfer catalysis in aprotic sodium oxygen batteries
Xia, C., Black, R., Fernandes, R., Adams, B., & Nazar, L. F. (2015) · Nature Chemistry · doi:10.1038/nchem.2260 · Cited by 298
Luo, W., Zhang, Y., Xu, S., Dai, J., Hitz, E., Li, Y., Yang, C., Chen, C., Liu, B., & Hu, L. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01138 · Cited by 285
Su, D., Kretschmer, K., & Wang, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501785 · Cited by 258
Atomic-Layer-Deposition Oxide Nanoglue for Sodium Ion Batteries
Han, X., Liu, Y., Jia, Z., Chen, Y.-C., Wan, J., Weadock, N., Gaskell, K. J., Li, T., & Hu, L. (2014) · Nano Letters · doi:10.1021/nl4035626 · Cited by 204
On rechargeability and reaction kinetics of sodium–air batteries
Yadegari, H., Li, Y., Banis, M. N., Li, X., Wang, B., Sun, Q., Li, R., Sham, T.-K., Cui, X., & Sun, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01654h · Cited by 165
An Electrolyte for Reversible Cycling of Sodium Metal and Intercalation Compounds
Schafzahl, L., Hanzu, I., Wilkening, M., & Freunberger, S. A. (2016) · ChemSusChem · doi:10.1002/cssc.201601222 · Cited by 114
The Al−Na (Aluminum-Sodium) system
Murray, J. L. (1983) · Bulletin of Alloy Phase Diagrams · doi:10.1007/bf02868094 · Cited by 56
Stability of Sodium Electrodeposited from a Room Temperature Chloroaluminate Molten Salt
Gray, G. E., Kohl, P. A., & Winnick, J. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048391 · Cited by 41
Cited by
Jia, X., Liu, C., Neale, Z. G., Yang, J., & Cao, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00628 · Cited by 1,791
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Interfacial engineering to achieve an energy density of over 200 Wh kg−1 in sodium batteries
Li, Y., Zhou, Q., Weng, S., Ding, F., Qi, X., Lu, J., Li, Y., Zhang, X., Rong, X., Lu, Y., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01033-6 · Cited by 471
Self-citationDendrite‐Free Sodium‐Metal Anodes for High‐Energy Sodium‐Metal Batteries
Sun, B., Li, P., Zhang, J., Wang, D., Munroe, P., Wang, C., Notten, P. H. L., & Wang, G. (2018) · Advanced Materials · doi:10.1002/adma.201801334 · Cited by 416
Metadata
- Authors
- Liu, S., Tang, S., Zhang, X., Wang, A., Yang, Q.-H., & Luo, J.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-08-14
- Volume
- 17
- Issue
- 9
- Pages
- 5862-5868
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2742948239
- Cited by
- 336
- References
- 43
- FWCI
- 13.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.