Impact of Microporous Layer Roughness on Gas-Diffusion-Electrode-Based Polymer Electrolyte Membrane Fuel Cell Performance
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
This study explores the role of the gas diffusion media microporous layer (MPL) surface structure on the electrochemical properties of gas-diffusion-electrode (GDE)-based membrane electrode assemblies (MEAs). It has been shown that a thin ionomer layer on top of the GDE and hot pressing is needed to create good contact between the catalyst layer and the membrane. In this study, gas diffusion media with different MPL surface roughness were applied to fabricate GDE-based MEAs to understand how MPL roughness impacts the amount of ionomer overlayer required for maximum performance. Electron microscopy was employed to investigate MPL/catalyst layer and catalyst layer/membrane interfaces. In-situ performance testing was used to assess the impact of MPL roughness and ionomer overlayer on catalyst utilization and air polarization performance. We find that a smoother MPL surface required a thinner ionomer overlayer than gas diffusion media (GDM) with a rougher MPL surface to achieve a performance comparable to direct-coated catalyst-coated-membrane MEAs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To improve the interface between the CL and membrane and reduce the interfacial resistance, coating an extra ionomer layer on the top of the GDE was often applied [166,167].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [166]
In the citing paper
“This situation will be more serious when the MPL's surface roughness increases [166].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [166]
In the citing paper
“It has been found that the critical ionomer loading increases as the surface roughness of MPLs increases [166].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [166]
In the citing paper
“When applying CL onto MPL, the CL surface facing the membrane is uneven and has an increased roughness compared to the MPL (Figure 11(b2)), making it hard for the membrane to contact the entire CL surface and thus causing gaps (similar to the case shown in Figure 11c,d) [166].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [166]
Citations
Cites
Review and analysis of PEM fuel cell design and manufacturing
Mehta, V., & Cooper, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00542-6 · Cited by 1,685
Determination of Catalyst Unique Parameters for the Oxygen Reduction Reaction in a PEMFC
Neyerlin, K. C., Gu, W., Jorne, J., & Gasteiger, H. A. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2266294 · Cited by 426
Impact of manufacturing processes on proton exchange membrane fuel cell performance
Shahgaldi, S., Alaefour, I., & Li, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.05.086 · Cited by 138
Setzler, B. P., & Fuller, T. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0361506jes · Cited by 117
Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers
Mauger, S. A., Neyerlin, K. C., Yang-Neyerlin, A. C., More, K. L., & Ulsh, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0091813jes · Cited by 81
Self-citationInvestigation of the Impact of Interfacial Delamination on Polymer Electrolyte Fuel Cell Performance
Kim, S., Khandelwal, M., Chacko, C., & Mench, M. M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3006398 · Cited by 58
Influence of hot-pressing temperature on the performance of PEMFC and catalytic activity
Lin, J.-C., Lai, C.-M., Ting, F.-P., Chyou, S., & Hsueh, K. (2009) · Journal of Applied Electrochemistry · doi:10.1007/s10800-008-9758-1 · Cited by 58
Zenyuk, I. V., Kumbur, E. C., & Litster, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.165 · Cited by 53
Sung, C.-C., Liu, C., & Cheng, C. C. J. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.05.110 · Cited by 35
Fultz, D. W., & Chuang, P.-Y. A. (2011) · Journal of Fuel Cell Science and Technology · doi:10.1115/1.4003632 · Cited by 35
Research works printed but not linked: 2
- 10.1007/s10800-008-9758-1 · DOI
- Mauger S., 2019, J. Power Sources
Cited by
A recent overview of proton exchange membrane fuel cells: Fundamentals, applications, and advances
Qasem, N. A. A. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123746 · Cited by 183
Yang, Y., Zhou, X. Y., Li, B., & Zhang, C. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.10.185 · Cited by 147
Yuan, X., Nayoze-Coynel, C., Shaigan, N., Fisher, D. C., Zhao, N., Zamel, N., Gazdzicki, P., Ulsh, M., Friedrich, K. A., Girard, F., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229540 · Cited by 118
Self-citationRoll-to-roll production of catalyst coated membranes for low-temperature electrolyzers
Park, J., Kang, Z., Bender, G., Ulsh, M., & Mauger, S. A. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228819 · Cited by 115
Self-citationQiu, D., Peng, L., Yi, P., Lehnert, W., & Lai, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111660 · Cited by 98
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Development of high-performance roll-to-roll-coated gas-diffusion-electrode-based fuel cells
Mauger, S. A., Wang, M., Cetinbas, F. C., Dzara, M. J., Park, J., Myers, D. J., Ahluwalia, R. K., Pylypenko, S., Hu, L., Litster, S., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230039 · Cited by 84
Self-citationBalakrishnan, M., Shrestha, P., Ge, N., Lee, C., Fahy, K. F., Zeis, R., Schulz, V. P., Hatton, B. D., & Bazylak, A. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b02371 · Cited by 83
Chen, Y.-C., Karageorgiou, C., Eller, J., Schmidt, T. J., & Büchi, F. N. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231612 · Cited by 72
Wang, H., Zhang, X., Yin, F., Chu, W., & Chen, B. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04331a · Cited by 72
Etzold, B. J. M., Krewer, U., Thiele, S., Dreizler, A. M., Klemm, E., & Turek, T. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130501 · Cited by 70
“In PEM electrolysis, proton transport alters with the distribution of the solid electrolyte, which depends on where exactly the CL is coated, i.e. on the membrane or the PTL [66], and on the coating method.”
MethodPEM electrolyzer characterization with carbon-based hardware and material sets
Young, J. L., Kang, Z., Ganci, F., Madachy, S., & Bender, G. (2021) · Electrochemistry Communications · doi:10.1016/j.elecom.2021.106941 · Cited by 64
Pure-Water-Fed Forward-Bias Bipolar Membrane CO2 Electrolyzer
Heßelmann, M., Lee, J. K., Chae, S., Tricker, A. W., Keller, R., Weßling, M., Su, J., Kushner, D. I., Weber, A. Z., & Peng, X. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c02799 · Cited by 51
Fu, X., Wei, J. C., Ning, F., Bai, C., Wen, Q., Jin, H., Li, Y., Zou, S., Pan, S., Chen, J., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230832 · Cited by 50
Fu, X., Wen, Q., Han, J., Wei, J. C., Li, Y., Ning, F., & Zhou, X. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.06.014 · Cited by 46
Wu, N., Liu, Y., Tian, X., Liu, F., Ma, Y., Zhang, S., Zhang, Q., Hou, D., Qi, Y., Yang, R., et al. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233412 · Cited by 46
Liu, L., Li, H., & Avgouropoulos, G. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.08.270 · Cited by 47
Chen, Y.-C., Dörenkamp, T., Csoklich, C., Berger, A., Marone, F., Eller, J., Schmidt, T. J., & Büchi, F. N. (2023) · Energy Advances · doi:10.1039/d3ya00189j · Cited by 43
Wang, M., Medina, S., Ochoa-Lozano, J., Mauger, S. A., Pylypenko, S., Ulsh, M., & Bender, G. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.186 · Cited by 42
“2(a), left much to be desired because of the lack of ionomer overlayer [27,28].”
InfluentialSelf-citationLin, R., Yu, X., Chen, L., Tang, S., Yin, X., & Hao, Z. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114319 · Cited by 42
Liu, L., Xiong, W., Cui, L., Xue, Z., Huang, C., Song, Q., Bai, W., Peng, Y., Chen, X., Liu, K., et al. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202006408 · Cited by 39
Inkjet printing technique for membrane fabrication and modification: A review
Wang, C., Park, M. J., Choo, Y., Huang, Y., Phuntsho, S., & Shon, H. K. (2023) · Desalination · doi:10.1016/j.desal.2023.116841 · Cited by 40
Optimized mass transfer in a Pt-based cathode catalyst layer for PEM fuel cells
Wang, M., Teng, J., Zaman, S., Zhang, S., Chen, X., Zhang, K., Wang, X., Li, Z., & Wu, M. (2024) · Green Chemistry · doi:10.1039/d3gc05033e · Cited by 38
Self-citationMehrazi, S., Sarker, M., Mojica, F., Rolfe, P., & Chuang, P. A. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138690 · Cited by 35
Wang, M., Sun, E., Wang, Y., Lei, L., Du, Z., Zaman, S., Li, S., & Wu, M. (2025) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2025.125116 · Cited by 33
Self-citationSim, J., Kang, M., Min, K., Lee, E., & Jyoung, J.-Y. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.03.265 · Cited by 33
Sim, J., Kang, M., Oh, H., Lee, E., Jyoung, J.-Y., & Min, K. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.07.096 · Cited by 32
Boosting oxygen mass transfer for efficient H2O2 generation via 2e−-ORR: A state-of-the-art overview
Yang, S., Liu, S., Li, H., Wang, Z., Zhang, J., Liu, M., Ding, J., Qiu, S., & Deng, F. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.143889 · Cited by 32
Mitigation and Diagnosis of Pin-Hole Formation in Polymer Electrolyte Membrane Fuel Cells
Taylor, A. K., Smith, C., & Neyerlin, K. C. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232971 · Cited by 26
Failure of cathode gas diffusion layer in 1 kW fuel cell stack under new European driving cycle
Yang, Y., Zhou, X. Y., Li, B., & Zhang, C. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117688 · Cited by 24
Wang, M., Peng, F., Zou, J., Zhao, W. G., Wu, M., Williams, M. C., Yu, G., & Wang, H. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115707 · Cited by 23
Self-citationLi, S., Zhang, H., Wu, L., Zhao, H., Tao, L., Li, L., Sun, C., Ju, D., & An, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.148868 · Cited by 23
Chen, L., Lin, R., Yu, X., Zheng, T., Dong, M., Lou, M., Ma, Y., & Hao, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c03699 · Cited by 23
The Impact of Hot-Press Conditions on the Durability of Polymer Electrolyte Membrane Fuel Cells
Wang, M., Taylor, A. K., Ochoa-Lozano, J., Medina, S., Pfeilsticker, J., Mauger, S. A., Pylypenko, S., Ulsh, M., & Bender, G. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.12.098 · Cited by 22
Self-citationZou, J., Huang, H., Zaman, S., Yao, K., Xing, S. J., Chen, M., Wang, H., & Wang, M. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.141113 · Cited by 22
Self-citationWang, X., Zou, J., Zhang, Z., Zhao, C., Wang, M., & Wu, M. (2024) · Fuel · doi:10.1016/j.fuel.2024.133559 · Cited by 21
Self-citationAhmed-Maloum, M., David, T., Guétaz, L., Duru, P., Pauchet, J., Michel Quintard, A., & Prat, M. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232735 · Cited by 21
Wen, Q., & Zhou, X. (2025) · Sustainable Energy & Fuels · doi:10.1039/d5se00552c · Cited by 20
Chen, L., Lin, R., Dong, M., Yu, X., Lou, M., & Hao, Z. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c03626 · Cited by 19
Babu, S. K., O'Brien, T. E., Workman, M. J., Wilson, M. S., Mukundan, R., & Borup, R. L. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abde82 · Cited by 17
Medina, S., Foster, J. G., Dzara, M. J., Wang, M., Ulsh, M., Mauger, S. A., & Pylypenko, S. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4265709 · Cited by 17
Self-citationWang, H., Osmieri, L., Yu, H., Zachman, M. J., Park, J. H., Kariuki, N. N., Cetinbas, F. C., Khandavalli, S., Mauger, S. A., Myers, D. J., et al. (2022) · SusMat · doi:10.1002/sus2.106 · Cited by 16
Self-citationGaining the Freedom of Scalable Gas Diffusion Electrodes for the CO2 Reduction Reaction
Wang, X., Tomon, C., Bobrowski, T., Wilde, P., Junqueira, J. R. C., Quast, T., He, W., Sikdar, N., Weidner, J., & Schuhmann, W. W. (2022) · ChemElectroChem · doi:10.1002/celc.202200675 · Cited by 15
Athanasaki, G., Chauhan, N., Ahmad, R., & Kannan, A. M. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.07.052 · Cited by 15
Taylor, A. K., Baez-Cotto, C. M., Hu, L., Smith, C., Rodriguez-Nazario, A., Young, J. L., Mauger, S. A., & Neyerlin, K. C. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235884 · Cited by 13
Self-citationGrebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Radev, I., Nürenberg, E., Kubina, A., Peinecke, V., Kohsakowski, S., Segets, D., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236457 · Cited by 12
Yao, K., Zhu, Z., Sun, Y., Zou, J., Wang, M., & Wang, H. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150129 · Cited by 12
Self-citationWang, M., Wang, X., Sun, E., Kang, Z., Gong, F., Hou, B., Yang, G., Wu, M., & Zhang, F. (2025) · Nano-Micro Letters · doi:10.1007/s40820-025-01907-w · Cited by 12
“GDL is recognized as a pivotal component in PEMFCs, bridging the CL and flow fields and facilitating the transport channels for gas phases [96, 128–130].”
Self-citationDesigner diffusion media microstructures enhance polymer electrolyte fuel cell performance
Horst, R. J., van der Linde, R., Jacquemond, R. R., Liu, B., & Forner‐Cuenca, A. (2025) · Energy & Environmental Science · doi:10.1039/d5ee03633j · Cited by 12
Park, J., Ulsh, M., & Mauger, S. A. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.06.168 · Cited by 12
Self-citationJeon, K., Lee, S., Kim, J. M., Um, S., Cho, E., & Jung, Y. S. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c04163 · Cited by 12
Lan, D., Zan, S., Liao, Z., Wang, X., Xu, Q., & Gao, H. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.02.425 · Cited by 11
Chen, Z., Pan, W., Tang, L., Chen, X., & Wang, F. (2024) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2024.01.023 · Cited by 10
Turtayeva, Z., Xu, F., Dillet, J., Mozet, K., Peignier, R., Celzard, A., & Maranzana, G. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e29622 · Cited by 10
Wang, L., Yao, J., Pei, Y., Zhu, W., Che, Z., Zhang, J., Yin, Y. S., & Guiver, M. D. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235136 · Cited by 10
Xing, Y., Liu, L., Fu, Z., Li, Y., & Li, H. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c01800 · Cited by 9
Eom, T., Shin, S., Hong, M., Lee, E., & Lee, S.-E. (2025) · Journal of Materials Chemistry A · doi:10.1039/d4ta09052g · Cited by 8
Li, G., Xu, T., Luo, S., Wang, Q., Li, X., Xing, D., Ming, P., Li, B., & Zhang, C. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235415 · Cited by 7
Liu, L., Xiong, W., Cui, L., Xue, Z., Huang, C., Song, Q., Bai, W., Peng, Y., Chen, X., Liu, K., et al. (2020) · Angewandte Chemie · doi:10.1002/ange.202006408 · Cited by 7
Interrelation between ink viscoelasticity and crack structure of fuel cell microporous layers
Chen, Z., Pan, W., Tang, L., Chen, X., & Wang, F. (2023) · Fuel · doi:10.1016/j.fuel.2023.130629 · Cited by 6
Zou, J., Zhu, Z., Sun, Y., Yao, K., Li, Z., Wang, M., & Wang, H. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c04735 · Cited by 6
Self-citationPeng, F., Zou, J., Chen, J., Wang, M., & Wu, M. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237219 · Cited by 6
Self-citationLiu, H., Chang, Z., Dong, F., Zhang, J., & Wang, B. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237239 · Cited by 5
Li, G., Xu, T., Luo, S., Wang, Q., Li, X., Xing, D., Ming, P., Li, B., & Zhang, C. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236598 · Cited by 4
Luo, W., Feng, A., Xie, H., Wei, Y., Lu, J., Thondaiman, P., & Wang, Q. (2026) · Batteries · doi:10.3390/batteries12080275 · Cited by 2
Taylor, A. K., Baez-Cotto, C. M., Hu, L., Smith, C., Rodriguez-Nazario, A., Young, J. L., Mauger, S. A., & Neyerlin, K. C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4874817 · Cited by 2
Self-citationLou, M., Lin, R., & Chen, L. (2023) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2023-01-7016
Taylor, A. K., Baez-Cotto, C. M., Hu, L., Smith, C., Rodriguez-Nazario, A., Young, J. L., Mauger, S. A., & Neyerlin, K. C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4975511
Self-citationLiu, S., Liu, T., Chen, L., Jia, H., Hua, L., & Mei, Y. (2025) · NANO · doi:10.1142/s1793292025500675
The Role and Performance of Gas Diffusion Layers in Proton Exchange Membrane Fuel Cell
Liu, Y., & Mohamedazeem, M. M. (2025) · Wiley eBooks · doi:10.1002/9783527850211.ch5
Maloum, M. E. M. A. (2023) · theses.fr (ABES) · doi:10.70675/eedb5ef0z30ddz4fedzac17z491d540a28eb
Influence of Solvents on Spray-Coated Catalyst for Direct Methanol Fuel Cells
Ng, W. W., Thiam, H. S., Chen, W., Pang, Y. L., Lim, Y. S., & Teoh, H. C. (2026) · doi:10.1109/cpeee69412.2026.11521592
“The carbon black mixture was first pre-dispersed in water and ethanol by ultrasonication for 15 minutes at a frequency of 35 kHz (VWR Symphony Ultrasonicator), followed by an additional 15 minutes of ultrasonication after the addition of Nafion [9-12].”
Kim, K.-D., KIM, J., Kang, B., LEE, S., PARK, J., BAEK, C.-M., & Kim, T. (2026) · Journal of Hydrogen and New Energy · doi:10.7316/jhne.2026.37.4.359
Metadata
- Authors
- Wang, M., Medina, S., Pfeilsticker, J. R., Pylypenko, S., Ulsh, M., & Mauger, S. A.
- Affiliations
- National Laboratory of the Rockies (US)
- Colorado School of Mines (US)
- Corresponding author
- Pylypenko, Svitlana
- Mauger, Scott A.
- ORCID
- Venue
- ACS Applied Energy Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-07
- Volume
- 2
- Issue
- 11
- Pages
- 7757-7761
- ISSN
- 2574-0962 (ISSN-L)
- OpenAlex
- W2989020176
- Cited by
- 74
- References
- 12
- Citations by year
- 2026: 3 · 2025: 15 · 2024: 13 · 2023: 11 · 2022: 11 · 2021: 15 · 2020: 6
- FWCI
- 2.88
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Energy Materials (publishedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Office of Energy Efficiency and Renewable Energy (DE-AC36-08GO28308)
- Fuel Cell Technologies Office
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- gas diffusion media, gas diffusion electrode, proton exchange membrane fuel cells, catalyst utilization, membrane electrode assembly, hot pressing, catalyst coated membranes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.