CoChat

Highly Ordered Nanoporous Carbon Scaffold with Controllable Wettability as the Microporous Layer for Fuel Cells

The DOI matches its Crossref record; 64 of the 65 references it cites were found in a registry or an index.

Abstract

We introduce a novel self-standing, nanoporous carbon scaffold (NCS, 25 μm thick), with an ordered inverse opal pore structure (∼85 nm pore) as a microporous layer (MPL) in a polymer electrolyte membrane fuel cell. Unlike previous studies, through chemical functionalization of the pore surfaces, the wettability of the MPL is controllably modified without altering the pore structure. Ex situ environmental scanning electron microscopy experiments revealed water sorption in the hydrophilic NCS under moderate relative humidity (RH) conditions but not in the hydrophobic NCS, wherein water condensation on the surface was noted only at high RH. The influence of structure and wettability of different MPLs on cell performance was gleaned from steady-state cell polarization behavior. For cells operated under dry conditions (≤80% RH), the limiting current for cells with a hydrophilic NCS MPL was the highest while that for cells with a hydrophobic NCS MPL was the lowest regardless of the level of water saturation (RH).

Overview

Integrity signals

Registry

Crossref · 10.1021/acsami.0c10755

Cites

64 of 64 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 64 references

Research works printed but not linked: 4

  1. Proceedings of 1996 Fuel Cell Seminar, November 17–20: Orlando, FL, US, 1996.
  2. 10.1149/1.3468615 · DOI · Paper page
  3. 10.1021/acsnano.7b01720 · DOI
  4. 10.1021/acsaem.8b01059 · DOI

Cited by

Metadata

Authors
Islam, M. N., Shrivastava, U., Atwa, M., Li, X., Birss, V., & Karan, K.
Affiliations
  • University of Calgary (CA)
  • Suez Canal University (EG)
Corresponding author
Karan, Kunal
Venue
ACS Applied Materials & Interfaces
Published
2020-08-03
Volume
12
Issue
35
Pages
39215-39226
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W3047420555
Cited by
52
References
65
Citations by year
2026: 5 · 2025: 8 · 2024: 8 · 2023: 14 · 2022: 10 · 2021: 5 · 2020: 2
FWCI
2.66
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Applied Materials & Interfaces (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • Cultural Affairs and Missions Sector, Ministry of Higher Education
  • University of Calgary
  • Ballard Power Systems
  • Natural Sciences and Engineering Research Council of Canada
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords
inverse opal, microporous layer, proton exchange membrane fuel cells, wettability control, surface functionalization, water sorption, relative humidity, vapor condensation, limiting current density, cell polarization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.