Mechanically Stable Thermally Crosslinked Poly(acrylic acid)/Reduced Graphene Oxide Aerogels
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Graphene oxide (GO) aerogels, high porosity (>99%) low density (∼3-10 mg cm(-3)) porous materials with GO pore walls, are particularly attractive due to their lightweight, high surface area, and potential use in environmental remediation, superhydrophobic and superoleophilic materials, energy storage, etc. However, pure GO aerogels are generally weak and delicate which complicates their handling and potentially limits their commercial implementation. The focus of this work was to synthesize highly elastic, mechanically stable aerogels that are robust and easy to handle without substantially sacrificing their high porosity or low density. To overcome this challenge, a small amount of readily available and thermally cross-linkable poly(acrylic acid) (PAA) was intermixed with GO to enhance the mechanical integrity of the aerogel without disrupting other desirable characteristic properties. This method is a simple straightforward procedure that does not include multistep or complicated chemical reactions, and it produces aerogels with mass densities of about 4-6 mg cm(-3) and >99.6% porosity that can reversibly support up to 10,000 times their weight with full recovery of their original volume. Finally, pressure sensing capabilities were demonstrated and their oil absorption capacities were measured to be around 120 g oil per g aerogel(-1) which highlights their potential use in practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reduction of graphene oxide via l -ascorbic acid
Zhang, J., Yang, H., Shen, G., Cheng, P., Zhang, J., & Guo, S. (2010) · Chem. Commun. · doi:10.1039/b917705a · Cited by 2,344
Cited by
Advanced Sorbents for Oil‐Spill Cleanup: Recent Advances and Future Perspectives
Ge, J., Zhao, H., Zhu, H., Huang, J., Shi, L., & Yu, S. (2016) · Advanced Materials · doi:10.1002/adma.201601812 · Cited by 714
Advanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
Functional Three-Dimensional Graphene/Polymer Composites
Wang, M., Duan, X., Xu, Y., & Duan, X. (2016) · ACS Nano · doi:10.1021/acsnano.6b03349 · Cited by 341
Cao, N., Lyu, Q., Li, J., Wang, Y., Yang, B., Szunerits, S., & Boukherroub, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.05.117 · Cited by 301
All inkjet-printed graphene-based conductive patterns for wearable e-textile applications
Karim, N., Afroj, S., Malandraki, A., Butterworth, S., Beach, C., Rigout, M., Novoselov, K. S., Casson, A. J., & Yeates, S. G. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc03669h · Cited by 282
Parale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
Multi-functional 2D hybrid aerogels for gas absorption applications
Androulidakis, C., Kotsidi, M., Gorgolis, G., Pavlou, C., Sygellou, L., Paterakis, G., Koutroumanis, N., & Galiotis, C. (2021) · Scientific Reports · doi:10.1038/s41598-021-92957-8 · Cited by 30
Metadata
- Authors
- Ha, H., Shanmuganathan, K., & Ellison, C. J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-10
- Volume
- 7
- Issue
- 11
- Pages
- 6220-6229
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2333336342
- Cited by
- 139
- References
- 1
- FWCI
- 9.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.