The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Surface Modification of Bacterial Cellulose Aerogels’ Web-like Skeleton for Oil/Water Separation
Abstract
The cellulose nanofibers of bacterial cellulose aerogel (BCA) are modified only on their surfaces using a trimethylsilylation reaction with trimethyichlorosilane in liquid phase followed by freeze-drying. The obtained hydrophobic bacterial cellulose aerogels (HBCAs) exhibit low density (≤6.77 mg/cm(3)), high surface area (≥169.1 m(2)/g), and high porosity (≈ 99.6%), which are nearly the same as those of BCA owing to the low degrees of substitution (≤0.132). Because the surface energy of cellulose nanofibers decreased and the three-dimensional web-like microstructure, which was comprised of ultrathin (20-80 nm) cellulose nanofibers, is maintained during the trimethylsilylation process, the HBCAs have hydrophobic and oleophilic properties (water/air contact angle as high as 146.5°) that endow them with excellent selectivity for oil adsorption from water. The HBCAs are able to collect a wide range of organic solvents and oils with absorption capacities up to 185 g/g, which depends on the density of the liquids. Hence, the HBCAs are wonderful candidates for oil absorbents to clean oil spills in the marine environment. This work provides a different way to multifunctionalize cellulose aerogel blocks in addition to chemical vapor deposition method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Li, X.-M., Reinhoudt, D., & Crego-Calama, M. (2007) · Chemical Society Reviews · doi:10.1039/b602486f · Cited by 2,079
Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels
Sun, H., Xu, Z., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201204576 · Cited by 1,888
Special wettable materials for oil/water separation
Xue, Z., Cao, Y., Liu, N., Feng, L., & Jiang, L. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13397d · Cited by 1,199
Hydrophobic Nanocellulose Aerogels as Floating, Sustainable, Reusable, and Recyclable Oil Absorbents
Korhonen, J. T., Kettunen, M., Ras, R. H. A., & Ikkala, O. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200475b · Cited by 817
Ultralight, Flexible, and Fire‐Resistant Carbon Nanofiber Aerogels from Bacterial Cellulose
Wu, Z., Li, C., Liang, H., Chen, J., & Yu, S. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209676 · Cited by 769
A Polydimethylsiloxane (PDMS) Sponge for the Selective Absorption of Oil from Water
Choi, S.-J., Kwon, T.-H., Im, H., Moon, D.-I., Baek, D. J., Seol, M.-L., Duarte, J. P., & Choi, Y.-K. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201352w · Cited by 707
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Nanofibrillated Cellulose Surface Modification: A Review
Missoum, K., Belgacem, M., & Bras, J. (2013) · Materials · doi:10.3390/ma6051745 · Cited by 658
Zhang, Z., Sèbe, G., Rentsch, D., Zimmermann, T., & Tingaut, P. (2014) · Chemistry of Materials · doi:10.1021/cm5004164 · Cited by 613
Cited by
Biopolymer Aerogels and Foams: Chemistry, Properties, and Applications
Zhao, S., Malfait, W. J., Guerrero‐Alburquerque, N., Koebel, M. M., & Nyström, G. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201709014 · Cited by 755
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Advanced Sorbents for Oil‐Spill Cleanup: Recent Advances and Future Perspectives
Ge, J., Zhao, H., Zhu, H., Huang, J., Shi, L., & Yu, S. (2016) · Advanced Materials · doi:10.1002/adma.201601812 · Cited by 714
Guan, H., Cheng, Z., & Wang, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b05763 · Cited by 666
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
A review of bio-based materials for oil spill treatment
Doshi, B., Sillanpää, M., & Kalliola, S. (2018) · Water Research · doi:10.1016/j.watres.2018.02.034 · Cited by 652
Electrospun nanofibrous materials: a versatile medium for effective oil/water separation
Wang, X., Yu, J., Sun, G., & Ding, B. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.010 · Cited by 448
Mi, H.-Y., Jing, X., Politowicz, A. L., Chen, E., Huang, H.-X., & Turng, L.-S. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.033 · Cited by 362
Review on the Aerogel-Type Oil Sorbents Derived from Nanocellulose
Liu, H., Geng, B., Chen, Y., & Wang, H. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02301 · Cited by 347
Jiang, J., Zhang, Q., Zhan, X., & Chen, F. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.144 · Cited by 338
Surface modifications of nanocellulose: From synthesis to high-performance nanocomposites
Ghasemlou, M., Daver, F., Ivanova, E. P., Habibi, Y., & Adhikari, B. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101418 · Cited by 327
Cellulose II aerogels: a review
Budtova, T. (2019) · Cellulose · doi:10.1007/s10570-018-2189-1 · Cited by 290
Foresti, M. L., Vázquez, A., & Boury, B. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.008 · Cited by 270
Nanocellulose-based lightweight porous materials: A review
Sun, Y., Chu, Y., Wu, W., & Xiao, H. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117489 · Cited by 266
Oily Wastewater Treatment: Methods, Challenges, and Trends
Medeiros, A. D. M. D., Silva Junior, C. J. G. D., Amorim, J. D. P. D., Durval, I. J. B., Costa, A. F. D. S., & Sarubbo, L. A. (2022) · Processes · doi:10.3390/pr10040743 · Cited by 256
Cellulose II Aerogel‐Based Triboelectric Nanogenerator
Zhang, L., Liao, Y., Wang, Y., Zhang, S., Yang, W., Pan, X., & Wang, Z. L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001763 · Cited by 254
Metadata
- Authors
- Sai, H., Fu, R., Xing, L., Xiang, J., Li, Z., Li, F., & Zhang, T.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-30
- Volume
- 7
- Issue
- 13
- Pages
- 7373-7381
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2032351207
- Cited by
- 436
- References
- 52
- FWCI
- 14.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.