The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Surface Modification of Bacterial Cellulose Aerogels’ Web-like Skeleton for Oil/Water Separation
Abstract
The cellulose nanofibers of bacterial cellulose aerogel (BCA) are modified only on their surfaces using a trimethylsilylation reaction with trimethyichlorosilane in liquid phase followed by freeze-drying. The obtained hydrophobic bacterial cellulose aerogels (HBCAs) exhibit low density (≤6.77 mg/cm(3)), high surface area (≥169.1 m(2)/g), and high porosity (≈ 99.6%), which are nearly the same as those of BCA owing to the low degrees of substitution (≤0.132). Because the surface energy of cellulose nanofibers decreased and the three-dimensional web-like microstructure, which was comprised of ultrathin (20-80 nm) cellulose nanofibers, is maintained during the trimethylsilylation process, the HBCAs have hydrophobic and oleophilic properties (water/air contact angle as high as 146.5°) that endow them with excellent selectivity for oil adsorption from water. The HBCAs are able to collect a wide range of organic solvents and oils with absorption capacities up to 185 g/g, which depends on the density of the liquids. Hence, the HBCAs are wonderful candidates for oil absorbents to clean oil spills in the marine environment. This work provides a different way to multifunctionalize cellulose aerogel blocks in addition to chemical vapor deposition method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Li, X.-M., Reinhoudt, D., & Crego-Calama, M. (2007) · Chemical Society Reviews · doi:10.1039/b602486f · Cited by 2,079
Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels
Sun, H., Xu, Z., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201204576 · Cited by 1,888
Special wettable materials for oil/water separation
Xue, Z., Cao, Y., Liu, N., Feng, L., & Jiang, L. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13397d · Cited by 1,199
Hydrophobic Nanocellulose Aerogels as Floating, Sustainable, Reusable, and Recyclable Oil Absorbents
Korhonen, J. T., Kettunen, M., Ras, R. H. A., & Ikkala, O. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200475b · Cited by 817
Ultralight, Flexible, and Fire‐Resistant Carbon Nanofiber Aerogels from Bacterial Cellulose
Wu, Z., Li, C., Liang, H., Chen, J., & Yu, S. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209676 · Cited by 769
A Polydimethylsiloxane (PDMS) Sponge for the Selective Absorption of Oil from Water
Choi, S.-J., Kwon, T.-H., Im, H., Moon, D.-I., Baek, D. J., Seol, M.-L., Duarte, J. P., & Choi, Y.-K. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201352w · Cited by 707
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Nanofibrillated Cellulose Surface Modification: A Review
Missoum, K., Belgacem, M., & Bras, J. (2013) · Materials · doi:10.3390/ma6051745 · Cited by 658
Zhang, Z., Sèbe, G., Rentsch, D., Zimmermann, T., & Tingaut, P. (2014) · Chemistry of Materials · doi:10.1021/cm5004164 · Cited by 613
Robust superhydrophobic polyurethane sponge as a highly reusable oil-absorption material
Zhu, Q., Chu, Y., Wang, Z., Chen, N., Lin, L., Liu, F., & Pan, Q. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta00125c · Cited by 578
Natural sorbents in oil spill cleanup
Choi, H. M., & Cloud, R. M. (1992) · Environmental Science & Technology · doi:10.1021/es00028a016 · Cited by 575
High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC)
Sehaqui, H., Zhou, Q., & Berglund, L. A. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.003 · Cited by 568
A Superhydrophobic Sponge with Excellent Absorbency and Flame Retardancy
Ruan, C., Ai, K., Li, X., & Lu, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201400775 · Cited by 480
Yang, X., & Cranston, E. D. (2014) · Chemistry of Materials · doi:10.1021/cm502873c · Cited by 473
Sehaqui, H., Salajková, M., Zhou, Q., & Berglund, L. A. (2010) · Soft Matter · doi:10.1039/b927505c · Cited by 462
Electrospun Porous Structure Fibrous Film with High Oil Adsorption Capacity
Wu, J., Wang, N., Wang, L., Dong, H., Zhao, Y., & Jiang, L. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300544d · Cited by 446
Ifuku, S., Nogi, M., Abe, K., Handa, K., Nakatsubo, F., & Yano, H. (2007) · Biomacromolecules · doi:10.1021/bm070113b · Cited by 424
Cellulose–Silica Nanocomposite Aerogels by In Situ Formation of Silica in Cellulose Gel
Cai, J., Liu, S., Feng, J., Kimura, S., Wada, M., Kuga, S., & Zhang, L. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201105730 · Cited by 394
Properties and characterization of hydrophobized microfibrillated cellulose
Andresen, M., Johansson, L.-S., Tanem, B. S., & Stenius, P. (2006) · Cellulose · doi:10.1007/s10570-006-9072-1 · Cited by 373
Outstanding adsorption performance of graphene–carbon nanotube aerogels for continuous oil removal
Kabiri, S., Tran, D. N. H., Altalhi, T., & Losic, D. (2014) · Carbon · doi:10.1016/j.carbon.2014.08.092 · Cited by 370
Mussel-Inspired Direct Immobilization of Nanoparticles and Application for Oil–Water Separation
Zhu, Q., & Pan, Q. (2014) · ACS Nano · doi:10.1021/nn4052277 · Cited by 368
Ultra porous nanocellulose aerogels as separation medium for mixtures of oil/water liquids
Cervin, N. T., Aulin, C., Larsson, P. T., & Wågberg, L. (2012) · Cellulose · doi:10.1007/s10570-011-9629-5 · Cited by 363
Magnetic and Highly Recyclable Macroporous Carbon Nanotubes for Spilled Oil Sorption and Separation
Gui, X., Zeng, Z., Lin, Z., Gan, Q., Xiang, R., Zhu, Y., Cao, A., & Tang, Z. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4015007 · Cited by 337
Schrope, M. (2011) · Nature · doi:10.1038/472152a · Cited by 321
Mussel-Inspired Chemistry and Michael Addition Reaction for Efficient Oil/Water Separation
Cao, Y., Zhang, X., Tao, L., Li, K., Xue, Z., Feng, L., & Wei, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4008598 · Cited by 317
Jin, H., Kettunen, M., Laiho, A., Pynnönen, H., Paltakari, J., Marmur, A., Ikkala, O., & Ras, R. H. A. (2011) · Langmuir · doi:10.1021/la103877r · Cited by 306
Aerogels from nanofibrillated cellulose with tunable oleophobicity
Aulin, C., Netrval, J., Wågberg, L., & Lindström, T. (2010) · Soft Matter · doi:10.1039/c001939a · Cited by 306
Ceylan, D., Dogu, S., Karacik, B., Yakan, S. D., Okay, O. S., & Okay, O. (2009) · Environmental Science & Technology · doi:10.1021/es900166v · Cited by 305
Surface acetylation of bacterial cellulose
Kim, D.-Y., Nishiyama, Y., & Kuga, S. (2002) · Cellulose · doi:10.1023/a:1021140726936 · Cited by 270
Jiang, F., & Hsieh, Y.-L. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13629a · Cited by 268
Hydrophobic Modification on Surface of Chitin Sponges for Highly Effective Separation of Oil
Duan, B., Gao, H., He, M., & Zhang, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505414y · Cited by 266
Photoswitchable Superabsorbency Based on Nanocellulose Aerogels
Kettunen, M., Silvennoinen, R. J., Houbenov, N., Nykänen, A., Ruokolainen, J., Sainio, J., Pore, V., Kemell, M., Ankerfors, M., Lindström, T., et al. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201001431 · Cited by 259
How to defend against future oil spills
Jernelöv, A. (2010) · Nature · doi:10.1038/466182a · Cited by 226
Lee, K.-Y., Blaker, J. J., & Bismarck, A. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.08.016 · Cited by 212
Surface only modification of bacterial cellulose nanofibres with organic acids
Lee, K.-Y., Quero, F., Blaker, J. J., Hill, C. A. S., Eichhorn, S. J., & Bismarck, A. (2011) · Cellulose · doi:10.1007/s10570-011-9525-z · Cited by 207
Gas-phase surface esterification of cellulose microfibrils and whiskers
Berlioz, S., Molina-Boisseau, S., Nishiyama, Y., & Heux, L. (2009) · Biomacromolecules · doi:10.1021/bm900319k · Cited by 193
Superhydrophobic fabrics for oil–water separation through a diamond like carbon (DLC) coating
Cortese, B., Caschera, D., Federici, F., Ingo, G. M., & Gigli, G. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00450g · Cited by 186
Efficiency of recycled wool-based nonwoven material for the removal of oils from water
Radetic, M., Ilic, V., Radojevic, D., Miladinovic, R., Jocic, D., & Jovancic, P. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2007.07.005 · Cited by 185
Sai, H., Xing, L., Xiang, J., Cui, L., Jiao, J., Zhao, C., Li, Z., & Li, F. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11198a · Cited by 172
Self-citationBrown, P. S., Atkinson, O. D. L. A., & Badyal, J. P. S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500882y · Cited by 163
Multifunctional foams derived from poly(melamine formaldehyde) as recyclable oil absorbents
Yang, Y. L., Deng, Y., Tong, Z., & Wang, C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00939h · Cited by 157
Governing factors for motor oil removal from water with different sorption materials
Rajakovic-Ognjanovic, V. N., Aleksic̀, G. N. , & Rajaković, L. V. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.10.066 · Cited by 152
Evaluation of Hydrophobic Polyvinyl-Alcohol Formaldehyde Sponges As Absorbents for Oil Spill
Pan, Y., Shi, K., Peng, C., et al. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5014634 · Cited by 152
Ambient pressure dried TEOS-based silica aerogels: good absorbents of organic liquids
Gurav, J. L., Rao, A. V., Nadargi, D. Y., & Park, H. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3968-8 · Cited by 127
Recycling of waste tyre rubber into oil absorbent
Wu, B. C., & Zhou, M. H. (2008) · Waste Management · doi:10.1016/j.wasman.2008.03.002 · Cited by 124
Property enhancement of optically transparent bionanofiber composites by acetylation
Nogi, M., Abe, K., Handa, K., Nakatsubo, F., Ifuku, S., & Yano, H. (2006) · Applied Physics Letters · doi:10.1063/1.2403901 · Cited by 121
Versatile Gas-Phase Reactions for Surface to Bulk Esterification of Cellulose Microfibrils Aerogels
Fumagalli, M., Ouhab, D., Molina-Boisseau, S., & Heux, L. (2013) · Biomacromolecules · doi:10.1021/bm400864z · Cited by 120
Sai, H., Li, X., Xiang, J., Cui, L., Jiao, J., Zhao, C., Li, Z., Li, F., & Zhang, T. (2014) · RSC Advances · doi:10.1039/c4ra02752c · Cited by 106
Self-citationUltra-low density porous polystyrene monolith: facile preparation and superior application
Jing, P., Fang, X., Yan, J., Guo, J., & Fang, Y. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11761h · Cited by 73
Superhydrophobic and Superoleophilic Miniature Device for the Collection of Oils from Water Surfaces
Wang, F., Lei, S., Xue, M., Ou, J., Li, C., & Li, W. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500359v · Cited by 71
Yu, Y., Wu, X., Guo, D., & Fang, J. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8480-0 · Cited by 51
Cited by
Biopolymer Aerogels and Foams: Chemistry, Properties, and Applications
Zhao, S., Malfait, W. J., Guerrero‐Alburquerque, N., Koebel, M. M., & Nyström, G. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201709014 · Cited by 755
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Advanced Sorbents for Oil‐Spill Cleanup: Recent Advances and Future Perspectives
Ge, J., Zhao, H., Zhu, H., Huang, J., Shi, L., & Yu, S. (2016) · Advanced Materials · doi:10.1002/adma.201601812 · Cited by 714
Guan, H., Cheng, Z., & Wang, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b05763 · Cited by 666
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
Metadata
- Authors
- Sai, H., Fu, R., Xing, L., Xiang, J., Li, Z., Li, F., & Zhang, T.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-30
- Volume
- 7
- Issue
- 13
- Pages
- 7373-7381
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2032351207
- Cited by
- 436
- References
- 52
- FWCI
- 14.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.