The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Recycling Perovskite Solar Cells To Avoid Lead Waste
Open accessAbstract
Methylammonium lead iodide (MAPbI3) perovskite based solar cells have recently emerged as a serious competitor for large scale and low-cost photovoltaic technologies. However, since these solar cells contain toxic lead, a sustainable procedure for handling the cells after their operational lifetime is required to prevent exposure of the environment to lead and to comply with international electronic waste disposal regulations. Herein, we report a procedure to remove every layer of the solar cells separately, which gives the possibility to selectively isolate the different materials. Besides isolating the toxic lead iodide in high yield, we show that the PbI2 can be reused for the preparation of new solar cells with comparable performance and in this way avoid lead waste. Furthermore, we show that the most expensive part of the solar cell, the conductive glass (FTO), can be reused several times without any reduction in the performance of the devices. With our simple recycling procedure, we address both the risk of contamination and the waste disposal of perovskite based solar cells while further reducing the cost of the system. This brings perovskite solar cells one step closer to their introduction into commercial systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Framework convention on climate change
Venanzi, M. (1992) · Cited by 2,587
Solar cell efficiency tables (Version 45)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2573 · Cited by 2,440
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Self-citationDocampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Self-citationXiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
UNITED NATIONS FRAMEWORK CONVENTION ON CLIMATE CHANGE (UNFCCC)
(2008) · The Complete Guide to Climate Change · doi:10.4324/9780203888469-65 · Cited by 1,322
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Needleman, H. (2004) · Annual Review of Medicine · doi:10.1146/annurev.med.55.091902.103653 · Cited by 1,144
A molecularly engineered hole-transporting material for efficient perovskite solar cells
Saliba, M., Orlandi, S., Matsui, T., Aghazada, S., Cavazzini, M., Correa-Baena, J.-P., Gao, P., Scopelliti, R., Mosconi, E., Dahmen, K.-H., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.17 · Cited by 944
Lead Uptake, Toxicity, and Detoxification in Plants
Pourrut, B., Shahid, M., Dumat, C., Winterton, P., & Pinelli, E. (2011) · Reviews of Environmental Contamination and Toxicology · doi:10.1007/978-1-4419-9860-6_4 · Cited by 937
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie · doi:10.1002/ange.201405334 · Cited by 714
Lead toxicity, a review of the literature. Part 1: Exposure, evaluation, and treatment.
Patrick, L. (2006) · PubMed · Cited by 583
Lead neurotoxicity: From exposure to molecular effects
Toscano, C. D., & Guilarte, T. R. (2005) · Brain Research Reviews · doi:10.1016/j.brainresrev.2005.02.004 · Cited by 386
Estimating the manufacturing cost of purely organic solar cells
Kalowekamo, J., & Baker, E. (2009) · Solar Energy · doi:10.1016/j.solener.2009.02.003 · Cited by 384
End-of-life management and recycling of PV modules
Fthenakis, V. M. (2000) · Energy Policy · doi:10.1016/s0301-4215(00)00091-4 · Cited by 365
Xie, F. X., Zhang, D., Su, H., Ren, X., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · ACS Nano · doi:10.1021/nn505978r · Cited by 351
A low cost azomethine-based hole transporting material for perovskite photovoltaics
Petrus, M. L., Bein, T., Dingemans, T. J., & Docampo, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03046c · Cited by 298
Self-citationTransparent Conductive Oxide‐Free Graphene‐Based Perovskite Solar Cells with over 17% Efficiency
Sung, H., Ahn, N., Jang, M. S., Lee, J., Yoon, H., Park, N., & Choi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501873 · Cited by 263
Transparent Conductive Oxide-Free Perovskite Solar Cells with PEDOT:PSS as Transparent Electrode
Sun, K., Li, P., Xia, Y., Chang, J., & Ouyang, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03171 · Cited by 235
Implications for CdTe and CIGS technologies production costs of indium and tellurium scarcity
Candelise, C., Winskel, M., & Gross, R. (2012) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2216 · Cited by 195
Lead toxicity: from overt to subclinical to subtle health effects.
Goyer, R. A. (1990) · Environmental Health Perspectives · doi:10.1289/ehp.9086177 · Cited by 191
Health hazards of methylammonium lead iodide based perovskites: cytotoxicity studies
Benmessaoud, I., Mahul‐Mellier, A., Horváth, E., Maco, B., Spina, M., Lashuel, H. A., & Forró, L. (2015) · Toxicology Research · doi:10.1039/c5tx00303b · Cited by 156
Silver Nanowire Top Electrodes in Flexible Perovskite Solar Cells using Titanium Metal as Substrate
Lee, M., Ko, Y., Min, B. K., & Jun, Y. (2015) · ChemSusChem · doi:10.1002/cssc.201501332 · Cited by 109
Interface Design Principles for High‐Performance Organic Semiconductor Devices
Nie, W., Gupta, G., Crone, B. K., Liu, F., Smith, D. L., Ruden, P. P., Kuo, C., Tsai, H., Wang, H., Li, H., et al. (2015) · Advanced Science · doi:10.1002/advs.201500024 · Cited by 21
Cited by
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Self-citationA Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Progress on lead-free metal halide perovskites for photovoltaic applications: a review
Hoefler, S. F., Trimmel, G., & Rath, T. (2017) · Monatshefte für Chemie - Chemical Monthly · doi:10.1007/s00706-017-1933-9 · Cited by 614
Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance
Saliba, M., Correa‐Baena, J., Grätzel, M., Hagfeldt, A., & Abate, A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703226 · Cited by 545
Schileo, G., & Grancini, G. (2021) · Journal of Materials Chemistry C · doi:10.1039/d0tc04552g · Cited by 472
Metadata
- Authors
- Binek, A., Petrus, M. L., Huber, N., Bristow, H., Hu, Y., Bein, T., & Docampo, P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-05-16
- Volume
- 8
- Issue
- 20
- Pages
- 12881-12886
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2398335655
- Cited by
- 268
- References
- 28
- FWCI
- 9.30
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.