The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Interfacial Engineering of Silicon Carbide Nanowire/Cellulose Microcrystal Paper toward High Thermal Conductivity
Abstract
Polymer composites with high thermal conductivity have attracted much attention, along with the rapid development of electronic devices toward higher speed and better performance. However, high interfacial thermal resistance between fillers and matrix or between fillers and fillers has been one of the primary bottlenecks for the effective thermal conduction in polymer composites. Herein, we report on engineering interfacial structure of silicon carbide nanowire/cellulose microcrystal paper by generating silver nanostructures. We show that silver nanoparticle-deposited silicon carbide nanowires as fillers can effectively enhance the thermal conductivity of the matrix. The in-plane thermal conductivity of the resultant composite paper reaches as high as 34.0 W/m K, which is one order magnitude higher than that of conventional polymer composites. Fitting the measured thermal conductivity with theoretical models qualitatively demonstrates that silver nanoparticles bring the lower interfacial thermal resistances both at silicon carbide nanowire/cellulose microcrystal and silicon carbide nanowire/silicon carbide nanowire interfaces. This interfacial engineering approach provides a powerful tool for sophisticated fabrication of high-performance thermal-management materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Effects of chemical bonding on heat transport across interfaces
Losego, M. D., Grady, M. E., Sottos, N. R., Cahill, D. G., & Braun, P. V. (2012) · Nature Materials · doi:10.1038/nmat3303 · Cited by 701
Cited by
Hu, J., Huang, Y., Yao, Y., Pan, G., Sun, J., Zeng, X., Sun, R., Xu, J.-B., Song, B., & Wong, C.-P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02410 · Cited by 499
Self-citationWang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Construction of 3D Skeleton for Polymer Composites Achieving a High Thermal Conductivity
Yao, Y., Sun, J., Zeng, X., Sun, R., Xu, J., & Wong, C. (2018) · Small · doi:10.1002/smll.201704044 · Cited by 389
Self-citationHu, J., Huang, Y., Zeng, X., Li, Q., Ren, L., Sun, R., Xu, J.-B., & Wong, C.-P. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.045 · Cited by 256
Self-citation
Metadata
- Authors
- Yao, Y., Zeng, X., Pan, G., Sun, J., Hu, J., Huang, Y., Sun, R., Xu, J.-B., & Wong, C.-P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-11-04
- Volume
- 8
- Issue
- 45
- Pages
- 31248-31255
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2542364214
- Cited by
- 169
- References
- 3
- FWCI
- 8.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.