The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Scalable-Production, Self-Powered TiO2 Nanowell–Organic Hybrid UV Photodetectors with Tunable Performances
Abstract
Hybrid inorganic–organic photoelectric devices draw considerable attention because of their unique features by combining the tunable functionality of organic molecules and the superior intrinsic carrier mobilities of inorganic semiconductors. An ordered thin layer of TiO 2 nanowells is formed in situ with shallow nanoconcave patterns without cracking with scalable production by a facile and economic strategy, and these layers are used as building blocks to construct hybrid UV photodetectors (PDs). Organic conducting polymers (polyaniline (PANI) with various morphologies) have been exploited as p -type materials, enabling tunable photodetection performances at zero bias. The thin layer of n -type TiO 2 nanowells is favorable for electron transport and light absorption with respect to their conventional nanotubular counterparts, while PANI acts as a hopping state or bridge to largely enhance the transition probability of the valence electrons in TiO 2 to its conduction band, resulting in an increase in photocurrent in a self-powered mode. In particular, the lowest polyaniline loading sample (TP1) exhibits the highest responsivity (3.6 mA·W –1 ), largest on–off switching ratio (∼10 3 ), excellent wavelength selectivity, fast response speed (3.8/30.7 ms), and good stability under 320 nm light illumination (0.56 mW·cm –2 ) without an external energy supply. This work might be of great value in developing tunable UV photoresponse materials with respect to low cost and a large area for future energy-efficient optoelectronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-dimensional inorganic nanostructures: synthesis, field-emission and photodetection
Zhai, T., Li, L., Ma, Y., Liao, M., Wang, X., Fang, X., Yao, J., Bando, Y., & Golberg, D. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00126k · Cited by 373
Self-citation
Cited by
Chen, J., Ouyang, W., Yang, W., He, J., & Fang, X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909909 · Cited by 535
Self-citationPhotoelectric Detectors Based on Inorganic p‐Type Semiconductor Materials
Teng, F., Hu, K., Ouyang, W., & Fang, X. (2018) · Advanced Materials · doi:10.1002/adma.201706262 · Cited by 507
Self-citationOuyang, W., Teng, F., He, J., & Fang, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807672 · Cited by 496
Self-citationSelf‐Powered Nanoscale Photodetectors
Tian, W., Wang, Y., Chen, L., & Li, L. (2017) · Small · doi:10.1002/smll.201701848 · Cited by 377
Application of Nanostructured TiO2 in UV Photodetectors: A Review
Li, Z., Li, Z., Zuo, C., & Fang, X. (2022) · Advanced Materials · doi:10.1002/adma.202109083 · Cited by 371
Self-citation
Metadata
- Authors
- Zheng, L., Yu, P., Hu, K., Teng, F., Chen, H., & Fang, X.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-11-30
- Volume
- 8
- Issue
- 49
- Pages
- 33924-33932
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2553045527
- Cited by
- 183
- References
- 1
- FWCI
- 3.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.