The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
High-Energy-Density Polymer Nanocomposites Composed of Newly Structured One-Dimensional BaTiO3@Al2O3 Nanofibers
Abstract
Flexible electrostatic capacitors are potentially applicable in modern electrical and electric power systems. In this study, flexible nanocomposites containing newly structured one-dimensional (1D) BaTiO 3 @Al 2 O 3 nanofibers (BT@AO NFs) and the ferroelectric polymer poly(vinylidene fluoride) (PVDF) matrix were prepared and systematically studied. The 1D BT@AO NFs, where BaTiO 3 nanoparticles (BT NPs) were embedded and homogeneously dispersed into the AO nanofibers, were successfully synthesized via an improved electrospinning technique. The additional AO layer, which has moderating dielectric constant, was introduced between BT NPs and PVDF matrixes. To improve the compatibility and distributional homogeneity of the nanofiller/matrix, dopamine was coated onto the nanofiller. The results show that the energy density due to high dielectric polarization is about 10.58 J cm –3 at 420 MV m –1 and the fast charge–discharge time is 0.126 μs of 3.6 vol % BT@AO-DA NFs/PVDF nanocomposite. A finite element simulation of the electric-field and electric current density distribution revealed that the novel-structured 1D BT@AO-DA NFs significantly improved the dielectric performance of the nanocomposites. The large extractable energy density and high dielectric breakdown strength suggest the potential applications of the BT@AO-DA NFs/PVDF nanocomposite films in electrostatic capacitors and embedded devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
A Dielectric Polymer with High Electric Energy Density and Fast Discharge Speed
Chu, B., Zhou, X., Ren, K., Neese, B., Lin, M., Wang, Q., Bauer, F., & Zhang, Q. M. (2006) · Science · doi:10.1126/science.1127798 · Cited by 2,453
Flexible high-temperature dielectric materials from polymer nanocomposites
Li, Q., Chen, L., Gadinski, M. R., Zhang, S., Zhang, G., Li, H. U., Iagodkine, E., Haque, A., Chen, L.-Q., Jackson, T. N., et al. (2015) · Nature · doi:10.1038/nature14647 · Cited by 2,133
Electrical Degradation and Breakdown in Polymers
Dissado, L. A., & Fothergill, J. C. (1992) · Institution of Engineering and Technology eBooks · doi:10.1049/pbed009e · Cited by 1,795
Fundamentals, processes and applications of high-permittivity polymer–matrix composites
Dang, Z.-M., Yuan, J.-K., Zha, J.-W., Zhou, T., Li, S.-T., & Hu, G.-H. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.001 · Cited by 1,783
Prateek, Thakur, V. K., & Gupta, R. K. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00495 · Cited by 1,659
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
Dang, Z., Yuan, J., Yao, S., & Liao, R. (2013) · Advanced Materials · doi:10.1002/adma.201301752 · Cited by 1,454
Elucidating the Structure of Poly(dopamine)
Dreyer, D. R., Miller, D. J., Freeman, B. D., Paul, D. R., & Bielawski, C. W. (2012) · Langmuir · doi:10.1021/la204831b · Cited by 1,086
Core–Shell Structured High‐k Polymer Nanocomposites for Energy Storage and Dielectric Applications
Huang, X., & Jiang, P. (2015) · Advanced Materials · doi:10.1002/adma.201401310 · Cited by 827
Status quo and future prospects for metallized polypropylene energy storage capacitors
Rabuffi, M., & Picci, G. (2002) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2002.805318 · Cited by 683
Polymer-Based Dielectrics with High Energy Storage Density
Chen, Q., Shen, Y., Zhang, S., & Zhang, Q. M. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-021017 · Cited by 642
Kim, P., Jones, S. C., Hotchkiss, P. J., Haddock, J. N., Kippelen, B., Marder, S. R., & Perry, J. W. (2007) · Advanced Materials · doi:10.1002/adma.200602422 · Cited by 601
Zhang, X., Shen, Y., Xu, B., Zhang, Q., Gu, L., Jiang, J., Ma, J., Lin, Y., & Nan, C. (2016) · Advanced Materials · doi:10.1002/adma.201503881 · Cited by 601
Materials for stretchable electronics
Wagner, S., & Bauer, S. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.37 · Cited by 449
Dielectric and piezoelectric properties of PVDF/PZT composites: A review
Jain, A., K. J., P., Sharma, A. K., Jain, A., & P.N, R. (2015) · Polymer Engineering & Science · doi:10.1002/pen.24088 · Cited by 438
Bhavanasi, V., Kumar, V., Parida, K., Wang, J., & Lee, P. S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09502 · Cited by 387
Samet, M., Levchenko, V., Boiteux, G., Seytre, G., Kallel, A., & Serghei, A. (2015) · The Journal of Chemical Physics · doi:10.1063/1.4919877 · Cited by 386
Xie, L., Huang, X., Wu, C., & Jiang, P. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04574h · Cited by 378
Maxwell Garnett theory for mixtures of anisotropic inclusions: Application to conducting polymers
Levy, O., & Stroud, D. (1997) · Physical Review B · doi:10.1103/physrevb.56.8035 · Cited by 366
Song, Y., Shen, Y., Liu, H., Lin, Y., Li, M., & Nan, C.-W. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30297g · Cited by 304
Luo, H., Zhang, D., Jiang, C., Yuan, X., Chen, C., & Zhou, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00555 · Cited by 286
Guo, N., DiBenedetto, S. A., Tewari, P., Lanagan, M. T., Ratner, M. A., & Marks, T. J. (2010) · Chemistry of Materials · doi:10.1021/cm902852h · Cited by 280
Cava, S., Tebcherani, S. M., Souza, I. A., Pianaro, S. A., Paskocimas, C. A., Longo, E., & Varela, J. A. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.02.046 · Cited by 265
Xie, L., Huang, X., Huang, Y., Yang, K., & Jiang, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp407340n · Cited by 247
Rational Co‐Design of Polymer Dielectrics for Energy Storage
Mannodi‐Kanakkithodi, A., Treich, G. M., Huan, T. D., Ma, R., Tefferi, M., Cao, Y., Sotzing, G. A., & Ramprasad, R. (2016) · Advanced Materials · doi:10.1002/adma.201600377 · Cited by 189
Yang, K., Huang, X., Zhu, M., Xie, L., Tanaka, T., & Jiang, P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4048267 · Cited by 184
Facile Synthesis of BaTiO3 Nanotubes and Their Microwave Absorption Properties
Zhu, Y.-F., Zhang, L., Natsuki, T., Fu, Y.-Q., & Ni, Q.-Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300069x · Cited by 180
DEVELOPMENT OF POLYMER-BASED 0–3 COMPOSITES WITH HIGH DIELECTRIC CONSTANT
ZHANG, L., & CHENG, Z.-Y. (2011) · Journal of Advanced Dielectrics · doi:10.1142/s2010135x11000574 · Cited by 168
Xie, L., Huang, X., Li, B.-W., Zhi, C., Tanaka, T., & Jiang, P. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52799a · Cited by 167
Cited by
Surmenev, R. A., Orlova, T., Chernozem, R. V., Ivanova, A. A., Bartasyte, A., Mathur, S., & Surmeneva, M. A. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.04.090 · Cited by 357
Pan, Z., Zhai, J., & Shen, B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03846a · Cited by 258
Self-citation
Metadata
- Authors
- Pan, Z., Yao, L., Zhai, J., Fu, D., Shen, B., & Wang, H.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-01-18
- Volume
- 9
- Issue
- 4
- Pages
- 4024-4033
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2570096844
- Cited by
- 267
- References
- 29
- FWCI
- 16.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
