The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Copper Nanowire-Based Aerogel with Tunable Pore Structure and Its Application as Flexible Pressure Sensor
Abstract
Aerogel is a kind of material with high porosity and low density. However, the research on metal-based aerogel with good conductivity is quite limited, which hinders its usage in electronic devices, such as flexible pressure sensors. In this work, we successfully fabricate copper nanowire (CuNW) based aerogel through a one-pot method, and the dynamics for the assembly of CuNWs into hydrogel is intensively investigated. The “bubble controlled assembly” mechanism is put forward for the first time, according to which tunable pore structures and densities (4.3–7.5 mg cm –3 ) of the nanowire aerogel is achieved. Subsequently, ultralight flexible pressure sensors with tunable sensitivities (0.02 kPa –1 to 0.7 kPa –1 ) are fabricated from the Cu NWs aerogels, and the negative correlation behavior of the sensitivity to the density of the aerogel sensors is disclosed systematically. This work provides a versatile strategy for the fabrication of nanowire-based aerogels, which greatly broadens their application potential.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
One‐Dimensional Nanomaterials for Soft Electronics
Gong, S., & Cheng, W. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600314 · Cited by 361
Khalily, M. A., Eren, H., Akbayrak, S., Susapto, H. H., Biyikli, N., Özkar, S., & Guler, M. O. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605577 · Cited by 181
Cognard, G., Ozouf, G., Beauger, C., Berthomé, G., Riassetto, D., Dubau, L., Chattot, R., Chatenet, M., & Maillard, F. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.08.010 · Cited by 97
Cited by
Emerging Technologies of Flexible Pressure Sensors: Materials, Modeling, Devices, and Manufacturing
Huang, Y., Fan, X., Chen, S., & Zhao, N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808509 · Cited by 543
Highly Compressible, Anisotropic Aerogel with Aligned Cellulose Nanofibers
Song, J., Chen, C., Yang, Z., Kuang, Y., Li, T., Li, Y., Huang, H., Kierzewski, I., Liu, B., He, S., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b04246 · Cited by 536
Mechanically Flexible Conductors for Stretchable and Wearable E‐Skin and E‐Textile Devices
Wang, B., & Facchetti, A. (2019) · Advanced Materials · doi:10.1002/adma.201901408 · Cited by 515
Ding, Y., Xu, T., Onyilagha, O., Fong, H., & Zhu, Z. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20929 · Cited by 366
Wearable and flexible sensors for user-interactive health-monitoring devices
Ha, M., Lim, S., & Ko, H. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01063c · Cited by 352
Recent Progress of Self‐Powered Sensing Systems for Wearable Electronics
Lou, Z., Li, L., Wang, L., & Shen, G. (2017) · Small · doi:10.1002/smll.201701791 · Cited by 309
Shi, Z., Meng, L., Shi, X., Li, H., Zhang, J., Sun, Q., Liu, X., Chen, J., & Liu, S. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00874-w · Cited by 282
A Roadmap for 3D Metal Aerogels: Materials Design and Application Attempts
Jiang, X., Du, R., Hübner, R., Hu, Y., & Eychmüller, A. (2021) · Matter · doi:10.1016/j.matt.2020.10.001 · Cited by 124
Zhang, L., An, L., Wang, Y., Lee, A., Schuman, Y., Ural, A., Fleischer, A. S., & Feng, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.104 · Cited by 98
Aerogels for Biomedical, Energy and Sensing Applications
Noman, M. T., Amor, N., Ali, A., Petrik, S., Coufal, R., Adach, K., & Fijalkowski, M. (2021) · Gels · doi:10.3390/gels7040264 · Cited by 73
Pan, W., Liang, C., Sui, Y., Wang, J., Liu, P., Zou, P., Guo, Z., Wang, F., Ren, X., & Yang, C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204166 · Cited by 51
Metadata
- Authors
- Xu, X., Wang, R., Nie, P., Cheng, Y., Lu, X., Shi, L., & Sun, J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-04-17
- Volume
- 9
- Issue
- 16
- Pages
- 14273-14280
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2605592401
- Cited by
- 165
- References
- 6
- FWCI
- 7.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.