The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Ultralight, Thermally Insulating, Compressible Polyimide Fiber Assembled Sponges
Abstract
Tunable density, thermally and mechanically stable, elastic, and thermally insulating sponges are required for demanding applications. Hierarchically structured sponges with bimodal interconnected pores, porosity more than 99%, and tunable densities (between 7.6 and 10.1 mg/cm 3 ) are reported using polyimide (PI) as high temperature stable polymer. The sponges are made by freeze-drying a dispersion of short PI fibers and precursor polymer, poly(amic acid) (PAA). The concept of “self-gluing” the fibrous network skeleton of PI during sponge formation was applied to achieve mechanical stability without sacrificing the thermal properties. The sponges showed initial degradation above 400 and 500 °C in air and nitrogen, respectively. They have low thermal conductivity of 0.026 W/mK and thermal diffusivity of 1.009 mm 2 /s for a density of 10.1 mg/cm 3 . The sponges are compressible for at least 10 000 cycles and good thermal insulators even at high compressions. These fibrous PI sponges are promising candidates for potential applications in thermal insulation, lightweight construction, high-temperature filtration, sensors, and catalyst carrier for high-temperature reactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Low‐Density Open Cellular Sponges as Functional Materials
Jiang, S., Agarwal, S., & Greiner, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700684 · Cited by 217
Self-citation
Cited by
A high performance wearable strain sensor with advanced thermal management for motion monitoring
Tan, C., Dong, Z., Li, Y., Zhao, H., Huang, X., Zhou, Z., Jiang, J.-W., Long, Y.-Z., Jiang, P., Zhang, T.-Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17301-6 · Cited by 580
Electrospun nanofiber reinforced composites: a review
Jiang, S., Chen, Y., Duan, G., Mei, C., Greiner, A., & Agarwal, S. (2018) · Polymer Chemistry · doi:10.1039/c8py00378e · Cited by 560
Self-citationKeirouz, A., Chung, M., Kwon, J., Fortunato, G., & Radacsi, N. (2020) · WIREs Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1626 · Cited by 277
Mechanical Properties of Electrospun Fibers—A Critical Review
Rashid, T. U., Gorga, R. E., & Krause, W. E. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100153 · Cited by 268
Metadata
- Authors
- Jiang, S., Uch, B., Agarwal, S., & Greiner, A.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-08
- Volume
- 9
- Issue
- 37
- Pages
- 32308-32315
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2745549921
- Cited by
- 212
- References
- 2
- FWCI
- 16.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ultralight, Thermally Insulating, Compressible Polyimide Fiber Assembled Sponges. https://app.cochat.ai/papers/10.1021/acsami.7b11045
- The paper
- Jiang, S., Uch, B., Agarwal, S., & Greiner, A. (2017). Ultralight, Thermally Insulating, Compressible Polyimide Fiber Assembled Sponges. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.7b11045
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.