The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Highly Stretchable and Wearable Strain Sensor Based on Printable Carbon Nanotube Layers/Polydimethylsiloxane Composites with Adjustable Sensitivity
Open accessAbstract
Strain sensors that are capable of monitoring complex human motions with high accuracy are highly desirable for developing wearable electronics. This paper reports the fabrication of highly stretchable and sensitive multidirectional strain sensors with tunable strain gauge factors by employing a digitally controlled printer to incorporate carbon nanotube (CNT) layers into polydimethylsiloxane (PDMS) substrates. The fabricated sensors exhibit a high stretchability (up to 45%) and sensitivity with a gauge factor of 35.75. The gauge factors could be easily modulated by tuning the number of CNT printing cycles to accommodate diverse requirements. The cyclic loading-unloading test results revealed that the composite strain sensors exhibited excellent long-term durability. Particularly, in this work, for the first time, human-motion-induced strain was measured by a motion capture system and compared with the strain data obtained from the fabricated strain sensors. The deviation of strains measured by composite sensors is less than 20%, indicating the great accuracy of CNT/PDMS sensors to quantify the amount of motion-induced strain. Of significant importance is that due to the flexibility of the printing technique used, rosette-type sensors were fabricated to simultaneously measure strains along multiple axes. These superior sensing capabilities of the fabricated CNT/PDMS strain sensors give them great application potential in motion-detecting systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite
Amjadi, M., Pichitpajongkit, A., Lee, S., Ryu, S., & Park, I. (2014) · ACS Nano · doi:10.1021/nn501204t · Cited by 2,350
Cited by
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
A review on polymers and their composites for flexible electronics
Li, L., Han, L., Hu, H., & Zhang, R. (2023) · Materials Advances · doi:10.1039/d2ma00940d · Cited by 256
Peng, B., Zhao, F., Ping, J., & Ying, Y. (2020) · Small · doi:10.1002/smll.202002681 · Cited by 224
High-performance flexible strain sensor with bio-inspired crack arrays
Han, Z., Liu, L., Zhang, J., Han, Q., Wang, K., Song, H., Wang, Z., Jiao, Z., Niu, S., & Ren, L. (2018) · Nanoscale · doi:10.1039/c8nr02514b · Cited by 172
Self-citation
Metadata
- Authors
- Wang, X., Li, J., Song, H., Huang, H., & Gou, J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-02-19
- Volume
- 10
- Issue
- 8
- Pages
- 7371-7380
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2787639454
- Cited by
- 261
- References
- 2
- FWCI
- 11.04
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Highly Stretchable and Wearable Strain Sensor Based on Printable Carbon Nanotube Layers/Polydimethylsiloxane Composites with Adjustable Sensitivity. https://app.cochat.ai/papers/10.1021/acsami.7b17766
- The paper
- Wang, X., Li, J., Song, H., Huang, H., & Gou, J. (2018). Highly Stretchable and Wearable Strain Sensor Based on Printable Carbon Nanotube Layers/Polydimethylsiloxane Composites with Adjustable Sensitivity. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.7b17766
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.