Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 268

The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.

Cellulose Nanofiber-Based Polyaniline Flexible Papers as Sustainable Microwave Absorbers in the X-Band

Gopakumar, Deepu A., Pai, Avinash R., Pottathara, Yasir Beeran, Pasquini, Daniel, Carlos de Morais, Luís, Luke, Mereena, Kalarikkal, Nandakumar, Grohens, Yves, Thomas, Sabu·2018·ACS Applied Materials & Interfaces

Abstract

A series of flexible, lightweight, and highly conductive cellulose nanopapers were fabricated through in situ polymerization of aniline monomer on to cellulose nanofibers with a rationale for attenuating electromagnetic radiations within 8.2-12.4 GHz (X band). The demonstrated paper exhibits good conductivity due to the formation of a continuous coating of polyaniline (PANI) over the cellulose nanofibers (CNF) during in situ polymerization, which is evident from scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. The free hydroxyl groups on the surface of nanocellulose fibers promptly form intermolecular hydrogen bonding with PANI, which plays a vital role in shielding electromagnetic radiations and makes the cellulose nanopapers even more robust. These composite nanopapers exhibited an average shielding effectiveness of ca. -23 dB (>99% attenuation) at 8.2 GHz with 1 mm paper thickness. The fabricated papers exhibited an effective attenuation of electromagnetic waves by a predominant absorption mechanism (ca. 87%) rather than reflection (ca. 13%), which is highly desirable for the present-day telecommunication sector. Unlike metal-based shields, these demonstrated PANI/CNF papers have given a new platform for designing green microwave attenuators via an absorption mechanism. The prime novelty of the present study is that these robust PANI/CNF nanopapers have the ability to attenuate incoming microwave radiations to an extent that is 360% higher than the shielding effectiveness value reported in the previous literature. This makes them suitable for use in commercial electronic gadgets. This demonstrated work also opens up new avenues for using cellulose nanofibers as an effective substrate for fabricating conductive flexible papers using polyaniline. The direct current conductivity value of PANI/CNF nanopaper was 0.314 S/cm, which is one of the key requisites for the fabrication of efficient electromagnetic shields. Nevertheless, such nanopapers also open up an arena of applications such as electrodes for supercapacitors, separators for Li-S, Li-polymer batteries, and other freestanding flexible paper-based devices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsami.8b04549

Cites

31 of 31 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 31 references

Cited by

Metadata

Authors
Gopakumar, D. A., Pai, A. R., Pottathara, Y. B., Pasquini, D., Carlos de Morais, L., Luke, M., Kalarikkal, N., Grohens, Y., & Thomas, S.
Venue
ACS Applied Materials & Interfaces
Published
2018-05-29
Volume
10
Issue
23
Pages
20032-20043
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W2807193095
Cited by
268
References
31
FWCI
9.13
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.