The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Cellulose Nanofiber-Based Polyaniline Flexible Papers as Sustainable Microwave Absorbers in the X-Band
Abstract
A series of flexible, lightweight, and highly conductive cellulose nanopapers were fabricated through in situ polymerization of aniline monomer on to cellulose nanofibers with a rationale for attenuating electromagnetic radiations within 8.2-12.4 GHz (X band). The demonstrated paper exhibits good conductivity due to the formation of a continuous coating of polyaniline (PANI) over the cellulose nanofibers (CNF) during in situ polymerization, which is evident from scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. The free hydroxyl groups on the surface of nanocellulose fibers promptly form intermolecular hydrogen bonding with PANI, which plays a vital role in shielding electromagnetic radiations and makes the cellulose nanopapers even more robust. These composite nanopapers exhibited an average shielding effectiveness of ca. -23 dB (>99% attenuation) at 8.2 GHz with 1 mm paper thickness. The fabricated papers exhibited an effective attenuation of electromagnetic waves by a predominant absorption mechanism (ca. 87%) rather than reflection (ca. 13%), which is highly desirable for the present-day telecommunication sector. Unlike metal-based shields, these demonstrated PANI/CNF papers have given a new platform for designing green microwave attenuators via an absorption mechanism. The prime novelty of the present study is that these robust PANI/CNF nanopapers have the ability to attenuate incoming microwave radiations to an extent that is 360% higher than the shielding effectiveness value reported in the previous literature. This makes them suitable for use in commercial electronic gadgets. This demonstrated work also opens up new avenues for using cellulose nanofibers as an effective substrate for fabricating conductive flexible papers using polyaniline. The direct current conductivity value of PANI/CNF nanopaper was 0.314 S/cm, which is one of the key requisites for the fabrication of efficient electromagnetic shields. Nevertheless, such nanopapers also open up an arena of applications such as electrodes for supercapacitors, separators for Li-S, Li-polymer batteries, and other freestanding flexible paper-based devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A treatise on electricity and magnetism
(1954) · Journal of the Franklin Institute · doi:10.1016/0016-0032(54)90053-8 · Cited by 9,077
Idealized powder diffraction patterns for cellulose polymorphs
French, A. D. (2014) · Cellulose · doi:10.1007/s10570-013-0030-4 · Cited by 3,247
Progress in preparation, processing and applications of polyaniline
Bhadra, S., Khastgir, D., Singha, N. K., & Lee, J. H. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.003 · Cited by 1,910
Polymer nanocomposites based on functionalized carbon nanotubes
Sahoo, N. G., Rana, S., Cho, J. W., Li, L., & Chan, S. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.03.002 · Cited by 1,670
Conducting polymers in biomedical engineering
Guimard, N. K., Gomez, N., & Schmidt, C. E. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.012 · Cited by 1,599
Electromagnetic interference shielding mechanisms of CNT/polymer composites
Al‐Saleh, M. H., & Sundararaj, U. (2009) · Carbon · doi:10.1016/j.carbon.2009.02.030 · Cited by 1,573
Yousefi, N., Sun, X., Lin, X., Shen, X., Jia, J., Zhang, B., Tang, B., Chan, M., & Kim, J. (2014) · Advanced Materials · doi:10.1002/adma.201305293 · Cited by 1,218
A review of vapor grown carbon nanofiber/polymer conductive composites
Al-Saleh, M. H., & Sundararaj, U. (2009) · Carbon · doi:10.1016/j.carbon.2008.09.039 · Cited by 1,087
Conducting polymers in chemical sensors and arrays
Lange, U., Roznyatovskaya, N. V., & Mirsky, V. M. (2008) · Analytica Chimica Acta · doi:10.1016/j.aca.2008.02.068 · Cited by 911
Ling, J., Zhai, W., Feng, W., Shen, B., Zhang, J., & Zheng, W. G. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am303289m · Cited by 771
Shen, B., Zhai, W., Tao, M., Ling, J., & Zheng, W. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4036527 · Cited by 629
Clay Nanopaper with Tough Cellulose Nanofiber Matrix for Fire Retardancy and Gas Barrier Functions
Liu, A., Walther, A., Ikkala, O., Belova, L., & Berglund, L. A. (2011) · Biomacromolecules · doi:10.1021/bm101296z · Cited by 412
High performance green barriers based on nanocellulose
Nair, S. S., Zhu, J., Deng, Y., & Ragauskas, A. J. (2014) · Sustainable Chemical Processes · doi:10.1186/s40508-014-0023-0 · Cited by 368
Flexible Electrically Conductive Nanocomposite Membrane Based on Bacterial Cellulose and Polyaniline
Hu, W., Chen, S., Yang, Z., Liu, L., & Wang, H. (2011) · The Journal of Physical Chemistry B · doi:10.1021/jp204422v · Cited by 321
Cellulose composite aerogel for highly efficient electromagnetic interference shielding
Huang, H.-D., Liu, C.-Y., Zhou, D., Jiang, X., Zhong, G.-J., Yan, D.-X., & Li, Z.-M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05998k · Cited by 306
Magnetic and conductive graphene papers toward thin layers of effective electromagnetic shielding
Song, W.-L., Guan, X.-T., Fan, L.-Z., Cao, W.-Q., Wang, C.-Y., Zhao, Q.-L., & Cao, M.-S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05939e · Cited by 245
Gopakumar, D. A., Pasquini, D., Henrique, M. A., de Morais, L. C., Grohens, Y., & Thomas, S. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02952 · Cited by 228
Self-citationElectrically conductive lines on cellulose nanopaper for flexible electrical devices
Hsieh, M.-C., Kim, C., Nogi, M., & Suganuma, K. (2013) · Nanoscale · doi:10.1039/c3nr01951a · Cited by 152
Dhakate, S. R., Subhedar, K. M., & Singh, B. P. (2015) · RSC Advances · doi:10.1039/c5ra03409d · Cited by 131
Processable polyaniline suspensions through in situ polymerization onto nanocellulose
Luong, N. D., Korhonen, J. T., Soininen, A. J., Ruokolainen, J., Johansson, L., & Seppälä, J. V. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.10.026 · Cited by 126
Polyaniline micro/nanofibers doped with saturation fatty acids
Zhang, L., Zhang, L., Wan, M., et al. (2006) · Synthetic Metals · doi:10.1016/j.synthmet.2006.01.011 · Cited by 99
Yagyu, H., Saito, T., Isogai, A., Koga, H., & Nogi, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06915 · Cited by 99
Sehaqui, H., Morimune, S., Nishino, T., & Berglund, L. A. (2012) · Biomacromolecules · doi:10.1021/bm301105s · Cited by 96
Polyaniline Based Nucleic Acid Sensor
Prabhakar, N., Arora, K., Singh, H., & Malhotra, B. D. (2008) · The Journal of Physical Chemistry B · doi:10.1021/jp711853q · Cited by 78
Pottathara, Y. B., Bobnar, V., Gorgieva, S., Grohens, Y., Finšgar, M., Thomas, S., & Kokol, V. (2016) · RSC Advances · doi:10.1039/c6ra06744a · Cited by 78
Self-citationCerqueira, D. A., Valente, A. J. M., Filho, G. R., & Burrows, H. D. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.04.016 · Cited by 66
Marins, J. A., Soares, B. G., Fraga, M., Müller, D., & Barra, G. M. D. O. (2014) · Cellulose · doi:10.1007/s10570-014-0191-9 · Cited by 66
Lin, Z., Guan, Z., & Huang, Z. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303297b · Cited by 59
Cu-coated cellulose nanopaper for green and low-cost electronics
Lizundia, E., Delgado‐Aguilar, M., Mutjé, P., Fernández, E., Robles‐Hernández, B., de la Fuente, M. R., Vilas‐Vilela, J. L., & León, L. M. (2016) · Cellulose · doi:10.1007/s10570-016-0920-3 · Cited by 48
Lin, W., Xu, K., Xin, M., Peng, J., Xing, Y., & Chen, M. (2014) · RSC Advances · doi:10.1039/c4ra04422c · Cited by 34
Zhang, Y., Wang, Z., Zhang, B., Zhao, G., & Guo, S. (2015) · RSC Advances · doi:10.1039/c5ra16007c · Cited by 24
Cited by
Li, Y., Liu, X., Nie, X., Yang, W., Wang, Y., Yu, R., & Shui, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807624 · Cited by 850
Electromagnetic Interference Shielding Polymers and Nanocomposites - A Review
Jiang, D., Murugadoss, V., Wang, Y., Lin, J., Ding, T., Wang, Z., Shao, Q., Wang, C., Liu, H., Lu, N., et al. (2019) · Polymer Reviews · doi:10.1080/15583724.2018.1546737 · Cited by 729
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
Surface and Interface Engineering for Nanocellulosic Advanced Materials
Yang, X., Biswas, S. K., Han, J., Tanpichai, S., Li, M., Chen, C., Zhu, S., Das, A. K., & Yano, H. (2021) · Advanced Materials · doi:10.1002/adma.202002264 · Cited by 497
Hou, Y., Sheng, Z., Fu, C., Kong, J., & Zhang, X. (2022) · Nature Communications · doi:10.1038/s41467-022-28906-4 · Cited by 459
Metadata
- Authors
- Gopakumar, D. A., Pai, A. R., Pottathara, Y. B., Pasquini, D., Carlos de Morais, L., Luke, M., Kalarikkal, N., Grohens, Y., & Thomas, S.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-05-29
- Volume
- 10
- Issue
- 23
- Pages
- 20032-20043
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2807193095
- Cited by
- 268
- References
- 31
- FWCI
- 9.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.