Refreshable Tactile Display Based on a Bistable Electroactive Polymer and a Stretchable Serpentine Joule Heating Electrode
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
The demand for tactile interactive devices has been growing exponentially as the sense of touch enriches the human-machine interaction experience. However, the tactile devices reported so far cannot offer high-quality performance, compact form factor, and relatively simple system architecture for low-cost production. We report the fabrication of a 4 × 4 pneumatic tactile display with Braille standard resolution using a bistable electroactive polymer (BSEP) thin film and a serpentine-patterned carbon nanotube electrode. The BSEP is a variable stiffness material that exhibits a stiffness change of 3000-fold within the narrow temperature range of 43 ± 3 °C. The carbon nanotube electrode was patterned on the polymer film via a P3R process, Prestretch-Pattern-Protect-Release, which leads to a serpentine-patterned composite electrode that is highly stretchable, retains its high electrical conductivity up to an ∼200% area strain, and provides a fast Joule heating rate of 31 °C/s. The tactile pixels are diaphragm actuators that can be individually controlled to produce 0.7 mm out of plain deformation and greater than 50 g of blocking force by application of local heating and pneumatic pressure. The device can operate under low voltage supply (30 V) and has a lifetime of over 100 000 cycles without much performance degradation. This work could open a path to building compact, user-friendly, and cost-effective tactile devices for a variety of important applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Choi, S., Park, J., Hyun, W., Kim, J., Kim, J., Lee, Y. B., Song, C., Hwang, H. J., Kim, J. H., Hyeon, T., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02790 · Cited by 568
Recent Progress on Stretchable Electronic Devices with Intrinsically Stretchable Components
Trung, T. Q., & Lee, N. (2017) · Advanced Materials · doi:10.1002/adma.201603167 · Cited by 497
Design of metal interconnects for stretchable electronic circuits
Gonzalez, M., Axisa, F., Bulcke, M. V., Brosteaux, D., Vandevelde, B., & Vanfleteren, J. (2008) · Microelectronics Reliability · doi:10.1016/j.microrel.2008.03.025 · Cited by 405
Li, Y.-Q., Zhu, W.-B., Yu, X.-G., Huang, P., Fu, S.-Y., Hu, N., & Liao, K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11196 · Cited by 207
Besse, N., Rosset, S., Zarate, J. J., & Shea, H. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700102 · Cited by 132
Programming temporal shapeshifting
Hu, X., Zhou, J., Vatankhah-Varnosfaderani, M., Daniel, W. F. M., Li, Q., Zhushma, A. P., Dobrynin, A. V., & Sheiko, S. S. (2016) · Nature Communications · doi:10.1038/ncomms12919 · Cited by 93
Cited by
Dielectric Elastomer Artificial Muscle: Materials Innovations and Device Explorations
Qiu, Y., Zhang, E., Plamthottam, R., & Pei, Q. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00516 · Cited by 380
Self-citationMultimode Hydraulically Amplified Electrostatic Actuators for Wearable Haptics
Leroy, E., Hinchet, R., & Shea, H. (2020) · Advanced Materials · doi:10.1002/adma.202002564 · Cited by 276
Soft Sensors and Actuators for Wearable Human–Machine Interfaces
Park, J., Lee, Y., Cho, S., Choe, A., Yeom, J., Ro, Y. G., Kim, J., Kang, D.-H., Lee, S., & Ko, H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00356 · Cited by 272
Yang, T., Kim, J. R., Jin, H., Gil, H., Koo, J., & Kim, H. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008831 · Cited by 178
Lee, J., Sul, H., Lee, W., Pyun, K. R., Ha, I., Kim, D., Park, H., Eom, H., Yoon, Y., Jung, J., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909171 · Cited by 176
Metadata
- Authors
- Qiu, Y., Lu, Z., & Pei, Q.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-03
- Volume
- 10
- Issue
- 29
- Pages
- 24807-24815
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2810171655
- Cited by
- 71
- References
- 6
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.