The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus
Abstract
A poly(dimethylsiloxane)/Fe (PDMS/Fe) composite ink was developed for reversible four-dimensional (4D) printing to create magnetically responsive three-dimensional (3D) structures with a fast response time for their structure evolvements under external magnetic field. These 3D structures could obtain or lose high magnetization immediately by the on or off of an external magnetic field due to the low magnetic coercive force and the high magnetic permittivity of soft magnetic Fe particles in this composite ink, whereas PDMS in this composite ink served as the flexible matrix component to ensure their shape recovery. As exampled by a 3D butterfly with the fast flapping of its wings under an external magnetic field, complex 3D structures created by 4D printing with this PDMS/Fe ink could have the reversible magnetically stimulated structure evolvement property and develop designed magnetically induced motions with a fast response time for various magnetomechanical applications. Furthermore, structure evolvements of these 3D structures could also induce structure-related property changes, as demonstrated by a 3D terahertz photonic crystal (3D-TPC) device with remotely tunable terahertz properties, which could create novel functionalities for various functional devices created by 4D printing from this kind of ink through external magnetic field stimulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Direct laser writing of three-dimensional photonic-crystal templates for telecommunications
Deubel, M., von Freymann, G., Wegener, M., Pereira, S., Busch, K., & Soukoulis, C. M. (2004) · Nature Materials · doi:10.1038/nmat1155 · Cited by 1,083
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Cited by
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Ryan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
4D printing and stimuli-responsive materials in biomedical aspects
Lui, Y. S., Sow, W. T., Tan, L. P., Wu, Y., Lai, Y., & Li, H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.005 · Cited by 333
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Metadata
- Authors
- Zhu, P., Yang, W., Wang, R., Gao, S., Li, B., & Li, Q.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-01
- Volume
- 10
- Issue
- 42
- Pages
- 36435-36442
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2894099325
- Cited by
- 190
- References
- 6
- FWCI
- 8.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.