The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Lithiophilic Ag Nanoparticle Layer on Cu Current Collector toward Stable Li Metal Anode
Abstract
Intractable hurdles of low Coulombic efficiency and dendritic Li formation during a repeated deposition/stripping process hinder the commercial use of Li metal anode for next-generation battery systems. Achieving uniform Li nucleation is one of the effective strategies to address these issues, and it is of practical importance to realize this on a commercial Cu current collector that is lithiophobic. Herein, we design a nanostructured Ag lithiophilic layer on a Cu foil via an electroless plating process for a Li metal current collector. The deposition of lithiophilic Ag particles that are homogeneously distributed on the Cu foil can reduce the nucleation overpotential, realizing uniform Li nucleation and subsequently flat Li plating. As a result, a stable cycle stability of up to 360 h (1 mA cm –2 ) and an average Columbic efficiency of 94.5% for 100 cycles (1 mA cm –2 ) are achieved. Furthermore, CuAg full cells with LiFePO 4 as a cathode exhibit good cycle performances and low polarization voltage. This approach provides another facile way for a stable lithium metal anode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Cited by
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
A review of current collectors for lithium-ion batteries
Zhu, P., Gastol, D., Marshall, J., Sommerville, R., Goodship, V., & Kendrick, E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229321 · Cited by 523
Lithium‐Metal Batteries: From Fundamental Research to Industrialization
Kim, S., Park, G., Lee, S. J., Seo, S., Ryu, K., Kim, C. H., & Choi, J. W. (2023) · Advanced Materials · doi:10.1002/adma.202206625 · Cited by 416
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
Strategies to anode protection in lithium metal battery: A review
Li, J., Kong, Z., Liu, X., Zheng, B., Fan, Q. H., Garratt, E., Schuelke, T., Wang, K., Xu, H., & Jin, H. (2021) · InfoMat · doi:10.1002/inf2.12189 · Cited by 267
Metadata
- Authors
- Hou, Z., Yu, Y., Wang, W., Zhao, X., Di, Q., Chen, Q., Chen, W., Liu, Y., & Quan, Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-02-01
- Volume
- 11
- Issue
- 8
- Pages
- 8148-8154
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2914620857
- Cited by
- 179
- References
- 2
- FWCI
- 7.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lithiophilic Ag Nanoparticle Layer on Cu Current Collector toward Stable Li Metal Anode. https://app.cochat.ai/papers/10.1021/acsami.9b01521
- The paper
- Hou, Z., Yu, Y., Wang, W., Zhao, X., Di, Q., Chen, Q., Chen, W., Liu, Y., & Quan, Z. (2019). Lithiophilic Ag Nanoparticle Layer on Cu Current Collector toward Stable Li Metal Anode. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.9b01521
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.