The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers
Abstract
3D printing of silicone elastomers with the direct ink writing (DIW) process has demonstrated great potential in areas as diverse as flexible electronics, medical devices, and soft robotics. However, most of current silicones are not printable because of their low viscosity and long curing time. The lack of systematic research on materials, devices, and processes during printing makes it a huge challenge to apply the DIW process more deeply and widely. In this report, aiming at the dilemmas in materials, devices, and processes, we proposed a comprehensive guide for printing highly stretchable silicone. Specifically, to improve the printability of silicone elastomers, nanosilica was added as a rheology modifier without sacrificing any stretching ability. To effectively control print speed and accuracy, a theoretical model was built and verified. With this strategy, silicone elastomers with different mechanical properties can all be printed and can realize infinite time and high speed printing (>25 mm/s) while maintaining accuracy. Here, super-stretchable silicone that can be stretched to 2000% was printed for the first time, and complex structures can be printed with high quality. For further demonstration, prosthetic nose, data glove capable of detecting fingers' movement, and artificial muscle that can lift objects were printed directly. We believe that this work could provide a guide for further work using the DIW process to print soft matters in a wide range of application scenarios.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Wang, G., McCain, M. L., Yang, L., He, A., Pasqualini, F. S., Agarwal, A., Yuan, H., Jiang, D., Zhang, D., Zangi, L., et al. (2014) · Nature Medicine · doi:10.1038/nm.3545 · Cited by 837
Cited by
Pagac, M., Hajnys, J., Ma, Q.-P., Jancar, L., Jansa, J., Stefek, P., & Mesicek, J. (2021) · Polymers · doi:10.3390/polym13040598 · Cited by 834
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Self-citationShi, Q., Dong, B., He, T., Sun, Z., Zhu, J., Zhang, Z., & Lee, C. (2020) · InfoMat · doi:10.1002/inf2.12122 · Cited by 661
Self-citationZhu, M., He, T., & Lee, C. (2020) · Applied Physics Reviews · doi:10.1063/5.0016485 · Cited by 287
Metadata
- Authors
- Zhou, L.-Y., Gao, Q., Fu, J.-Z., Chen, Q.-Y., Zhu, J.-P., Sun, Y., & He, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-11
- Volume
- 11
- Issue
- 26
- Pages
- 23573-23583
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2952112287
- Cited by
- 237
- References
- 3
- FWCI
- 12.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.