The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
3D Bioprinting Using Cross-Linker-Free Silk–Gelatin Bioink for Cartilage Tissue Engineering
Abstract
Cartilage tissue is deprived of intrinsic self-regeneration capability; hence, its damage often progresses to a chronic condition which reduces the quality of life. Toward the fabrication of functional tissue substitutes, three-dimensional (3D) bioprinting has progressed vastly over the last few decades. However, this progress is challenged by the difficulty in developing suitable bioink materials as most of them require toxic chemical cross-linking. In this study, our goal was to develop a cross-linker-free bioink with optimal rheology for polymer extrusion, aqueous, and nontoxic processing and offers structural support for cartilage regeneration. Toward this, we use the self-gelling ability of silk fibroin blends ( Bombyx mori and Philosamia ricini ) along with gelatin as a bulking agent. Silk and gelatin interact with each other through entanglement and physical cross-linking. The ink was rheologically and structurally optimized for printing efficiency in printing grid-like structures. The printed 3D constructs show optimal swelling capability, degradability, and compressive strength. Further, the construct supports the growth and proliferation of encapsulated chondrocytes and formation of the cartilaginous extracellular matrix as indicated by the increased sulfated glycosaminoglycan and collagen contents. This was further corroborated by the upregulation of chondrogenic gene expression with minimal hypertrophy of chondrocytes. Additionally, the construct demonstrates in vitro and in vivo biocompatibility. Notably, the ink demonstrates good print fidelity for printing anatomical structures such as the human ear enabled by optimized extrudability at adequate resolution. Altogether, the results indicate that the developed cross-linker-free silk–gelatin polymer-based bioink demonstrated high potential for its 3D bioprintability and application in cartilage tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Cited by
Digital light processing 3D printed silk fibroin hydrogel for cartilage tissue engineering
Hong, H., Seo, Y. B., Kim, D. Y., Lee, J. S., Lee, Y. J., Lee, H., Ajiteru, O., Sultan, M. T., Lee, O. J., Kim, S. H., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119679 · Cited by 473
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
3D bioprinted silk fibroin hydrogels for tissue engineering
Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., et al. (2021) · Nature Protocols · doi:10.1038/s41596-021-00622-1 · Cited by 294
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Advanced 3D-Printing Bioinks for Articular Cartilage Repair
Liang, Q., Ma, Y., Yao, X., & Wei, W. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i3.511 · Cited by 55
Metadata
- Authors
- Singh, Y. P., Bandyopadhyay, A., & Mandal, B. B.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-08-27
- Volume
- 11
- Issue
- 37
- Pages
- 33684-33696
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2970251954
- Cited by
- 245
- References
- 2
- FWCI
- 9.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Bioprinting Using Cross-Linker-Free Silk–Gelatin Bioink for Cartilage Tissue Engineering. https://app.cochat.ai/papers/10.1021/acsami.9b11644
- The paper
- Singh, Y. P., Bandyopadhyay, A., & Mandal, B. B. (2019). 3D Bioprinting Using Cross-Linker-Free Silk–Gelatin Bioink for Cartilage Tissue Engineering. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.9b11644
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.