Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 184

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Direct 3D Printing of Highly Anisotropic, Flexible, Constriction-Resistive Sensors for Multidirectional Proprioception in Soft Robots

Mousavi, Saeb, Howard, David, Zhang, Fenghua, Leng, Jinsong, Wang, Chun H.·2020·ACS Applied Materials & Interfaces

Abstract

A key missing technology for the emerging field of soft robotics is the provision of highly selective multidirectional tactile sensing that can be easily integrated into a robot using simple fabrication techniques. Conventional strain sensors, such as strain gauges, are typically designed to respond to strain in a single direction and are mounted on the external surface of a structure. Herein, we present a technique for three-dimensional (3D) printing of multidirectional, anisotropic, and constriction-resistive strain sensors, which can be directly integrated into the interior of soft robots. Using a carbon-nanotube-reinforced polylactic acid (PLA-CNT), both the sensing element and the conductive interconnect of the sensor system are 3D-printed. The sensor's sensitivity and anisotropy can be adjusted by controlling the air gap between printed adjacent tracks, infill density, and build orientation relative to the main loading direction. In particular, sensors printed with a near-zero air gap, i.e., adjacent tracks forming a kissing bond, can achieve a gauge factor of ∼1342 perpendicular to the raster orientation and a gauge factor of ∼1 parallel to the raster orientation. The maximum directional selectivity of this ultrasensitive sensor is 31.4, which is approximately 9 times greater than the highest value reported for multidirectional sensors so far. The high sensitivity stems from the progressive opening and closing of the kissing bond between adjacent tracks. The potential of this type of sensors and the simple manufacturing process are demonstrated by integrating the sensor with a soft robotic actuator. The sensors are able to identify and quantify the bending deformation and angle in different directions. The ability to fabricate sensors with tailored footprints and directional selectivity during 3D printing of soft robotic systems paves the way toward highly customizable, highly integrated multifunctional soft robots that are better able to sense both themselves and their environments.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsami.9b21816

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 184

Metadata

Authors
Mousavi, S., Howard, D., Zhang, F., Leng, J., & Wang, C. H.
Venue
ACS Applied Materials & Interfaces
Published
2020-03-04
Volume
12
Issue
13
Pages
15631-15643
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W3010419388
Cited by
184
References
5
FWCI
7.08
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.