CoChat

Ultrafast Generation of Nanostructured Noble Metal Aerogels by a Microwave Method for Electrocatalytic Hydrogen Evolution and Ethanol Oxidation

Zhao, Huan, Yuan, Yueyue, Zhang, Dan, Qin, Yingnan, Han, Yi, Li, Hongdong, Wang, Zuochao, Li, Shao-Xiang, Lai, Jianping, Wang, Lei · 2021 · ACS Applied Nano Materials

The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index; 3 of the 13 sources its claims cite were checked for support.

Abstract

As a self-supporting three-dimensional material, noble metal aerogels (NMAs) have attracted significant attention because of their large specific surface area, high porosity, and excellent catalytic activity, exhibiting satisfactory achievements in various fields. However, the preparation process of NMAs is costly and time-consuming, in addition to requirement of high concentration of precursors, complicated procedure, and uneven size of ligaments of NMAs. Although the favorable morphology and size characteristics endow them with broad application prospects, the above-mentioned problems have always been a huge obstacle to their development. Here, considering that the microwave and heating functions are available at the same time, we propose a synthesis method adopting the microwave heating process to prepare NMAs at an ultrafast speed. It only takes 10 s to get NMAs (including single-metal, bimetal, and trimetal-based NMAs), successfully gelling in a very wide initial salt concentration range (2.0 μM–6.25 mM), the first time to enter micromolar art. In addition, the size of aerogels has also been well controlled, especially the alloy aerogels, all of which have reached the scale below 10 nm. Moreover, it was found that the nanostructured NMAs exhibit outstanding electrocatalytic performance in the hydrogen evolution reaction and ethanol oxidation reaction. This undoubtedly provides a convenient way for the ultrafast and efficient preparation of nanostructured NMAs and also opens up a broader field for the development of electrocatalysts.

Overview

CoChat Summary

TL;DR

A household microwave method rapidly generates nanostructured noble metal aerogels in as little as 10 s over a wide precursor concentration range, including micromolar levels. The resulting Au–Rh and Au–Pt–Pd aerogels show strong electrocatalytic performance for hydrogen evolution and ethanol oxidation.

Key findings

  • Microwave heating produced single-, bi-, and trimetallic noble metal aerogels in 10 s at 100% power for 6.25 mM precursor, and gelation was achieved across 2.0 μM–6.25 mM initial salt concentrations, described as the first entry into the micromolar range.
  • Alloy aerogels had ligament sizes below 10 nm; monometallic Ru, Ag, and Pt aerogels had ligament sizes above 45 nm, while Rh and Pd were below 10 nm. Au aerogel specific surface area was 6.5 m² g⁻¹, mainly mesopores of 2–50 nm.
  • For alkaline HER in 1.0 M KOH, the Au–Rh gel reached 10 mA cm⁻² at an overpotential of 16 mV, compared with 33 mV for commercial Pt/C and 132 mV for Au–Rh NPs; its Tafel slope was 56 mV dec⁻¹, and its active surface area was 8.14 mF cm⁻². In acid, the Au–Rh gel Tafel slope was 21 mV dec⁻¹.
  • For EOR, the Au–Pt–Pd gel showed a mass activity of 8.8 A mgPt+Pd⁻¹ versus 1.14 A mgPt+Pd⁻¹ for commercial Pt/C, with If/Ib of 1.15 and 1.19, respectively; its area activity was 11.78 mA cm⁻², and Au–Pt gel If/Ib reached 2.03.

Methods

  • Noble metal hydrogels were synthesized by a one-step microwave-assisted reduction of metal salt solutions, using HAuCl₄·3H₂O and NaBH₄ as an example, in a 700 W microwave oven, followed by washing, ethanol exchange, freeze-drying, and aerogel formation.
  • The method was tested for single-metal aerogels (Au, Pd, Ru, Ag, Rh, Pt), bimetallic aerogels (Au–Ag, Au–Ru, Au–Rh, Au–Pd, Au–Pt), and trimetallic Au–Pt–Pd aerogels, with alloy precursor molar ratios set to 1:1 or 1:1:1 and total concentration fixed at 6.25 mM.
  • Characterization included TEM, HRTEM, SEM, EDX mapping, XRD, XPS, UV–vis, and nitrogen adsorption–desorption; electrocatalysis used a three-electrode system with LSV, CV, chronoamperometry, Tafel analysis, and ECSA calculations for HER in 1.0 M KOH or 0.5 M H₂SO₄ and EOR in 1.0 M KOH + 1.0 M ethanol.

Limitations

  • The paper does not explicitly state its own limitations.
  • Evident from the text: at high microwave power the solution tends to boil and the reaction ends with boiling, and the authors recommend operating the microwave oven in a fume hood because of possible gas release, vial failure, or explosion.
  • Evident from the text: although gelation takes 10 s, subsequent washing, ethanol exchange, and freeze-drying require additional time, including 2–3 days for solvent exchange and 12–24 h for freeze-drying; large-scale synthesis is proposed but not demonstrated.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsanm.1c02746

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

3 Valid · 2 Not valid · 3 Not checked · 53 Own results and interpretations

35 more claims

Create a free account to see all 61 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 15
  • The quote only partly states this claim. 1
  • Probably not a substantial claim. 6

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

2 of 2

Citations

Cites

Show all 53 references

Cited by

See all 24

Metadata

Authors
Zhao, H., Yuan, Y., Zhang, D., Qin, Y., Han, Y., Li, H., Wang, Z., Li, S.-X., Lai, J., & Wang, L.
Affiliations
  • Qingdao University of Science and Technology (CN)
  • Shandong Engineering Research Center for Marine Environment Corrosion and Safety Protection, College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao 266042, P. R. China
Corresponding author
  • Lai, Jianping
  • Wang, Lei
Venue
ACS Applied Nano Materials
Published
2021-09-17
Volume
4
Issue
10
Pages
11221-11230
ISSN
2574-0970 (ISSN-L)
OpenAlex
W3200369164
Cited by
24
References
47
Citations by year
2026: 4 · 2025: 8 · 2024: 3 · 2023: 6 · 2022: 3
FWCI
0.56
Type
journal article
Language
en
Open access
closed
Locations
ACS Applied Nano Materials (publishedVersion)
Funders
  • Qingdao University of Science and Technology (KF1702)
  • Taishan Scholar Project of Shandong Province (tsqn201909123)
  • National Natural Science Foundation of China (21571112, 22001143, 51572136, 51772162, 51802171)
  • Natural Science Foundation of Shandong Province (ZR2018BB031, ZR2019JQ14, ZR2020YQ34)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Aerogels and thermal insulation
  • Physical Sciences › Chemistry › Organic Chemistry › Nanomaterials for catalytic reactions
Keywords
microwave-assisted synthesis, ultrafast synthesis, electrocatalytic hydrogen evolution, ethanol oxidation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.