CoChat

A Versatile Strategy for Tailoring Noble Metal Supramolecular Gels/Aerogels and Their Application in Hydrogen Evolution

The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index; 4 of the 17 sources its claims cite were checked for support.

Abstract

Self-assembly of noble metal nanobuilding blocks (NBBs) to hierarchical self-supported porous monoliths provides a great potential for achieving their wonderful properties along with practical applications. However, the self-assembly procedure for this kind of material reported in template and sol–gel approach is limited to specific conditions, and little interest was paid to the role of ligands in the self-assembly process to grasp the control of the structure and properties. Herein, two ligands (L1 and L2) containing thiol and glutamic acid moiety were synthesized and grafted to noble metallic nanowires and nanospheres. It had been shown that these kind of functional NBBs formed supramolecular gels in various solvents. Interestingly, these gels displayed stimulus-responsibility that has remained unreported with noble metal gels so far. In particular, the gels formed by Pt nanowires capped with L2 (Pt NW -L2) demonstrated both thermo and shearing reversible gelation. Furthermore, aerogels can easily be prepared through supercritical drying, and their density and porosity were regulated by adjusting the NBBs concentration. Surprisingly, the self-standing aerogels constructed by nanowires kept intact except a dramatic compression by applying external forces. Specially, the aerogel by Pt NW -L2 displayed elastic nature for at least 10 cycles of loading and unloading external force, rarely reported in template-free noble metal aerogels. Fourier transform infrared, scanning electron microscopy, and transmission electron microscopy measurements revealed that the basic unit with designed ligands aggregate to bunch of nanowires and reticular structures by hydrogen bonding. Because of the three-dimensional network and hierarchical pores, Pt aerogels prepared by the present strategy exhibited low overpotential, more available active sites, and long-term stability in hydrogen evolution reaction. Thus, this work provides a novel versatile strategy for the synthesis of porous noble metal monoliths, and it would probably be widely used for fabricating other kinds of porous materials with remarkable properties.

Overview

CoChat Summary

TL;DR

The paper reports a versatile ligand-based self-assembly strategy to prepare noble metal supramolecular gels and aerogels from thiol/glutamic acid-capped nanowires and nanoparticles. Pt nanowire aerogels show thermo/shear-responsive gelation, tunable density/porosity, compressibility over at least 10 cycles, and improved HER performance (45 mV overpotential at 10 mA/cm2) versus Pt/C (52 mV).

Key findings

  • Two ligands (L1 and L2) containing thiol and glutamic acid moieties were grafted onto PtNW, Pt/CoNW, AuNW, and AuNP; grafting densities on PtNW were ∼3.45 and 7.13 molecules/nm2 for L1 and L2, and 6.73, 8.11, and 7.52 molecules/nm2 for Pt/CoNW-L2, AuNW-L2, and AuNP-L2, respectively.
  • Functionalized NBBs formed supramolecular gels in various solvents; PtNW-L2 gelled THF, CH2Cl2, and CHCl3 with a CGC of 1.5 w/v%, while PtNW-L1 gelled toluene at 4.5 w/v%. PtNW-L2 gel showed thermo- and shearing-reversible gelation, with a yield stress of 7230 Pa at 7.5 w/v%.
  • Aerogels prepared by supercritical CO2 drying had tunable density from 0.023 to 0.066 g/cm3 by varying NBB concentration from 1.5% to 7.5% (w/v); PtNW-L2 aerogel porosity was 99.7% at 7.5 w/v%, and specific surface areas were 8.79 m2 g−1 (PtNW-L1) and 13.23 m2 g−1 (PtNW-L2). The PtNW-L2 aerogel was compressed to 98.50% at 1 N and recovered to 99.40% in the first cycle, remaining elastic for at least 10 loading/unloading cycles.
  • In HER, overpotential at 10 mA/cm2 was 45 mV for PtNW-L2 aerogel, 66 mV for PtNW-L1 aerogel, 78 mV for PtNW-L2-acetone, and 52 mV for commercial 20% Pt/C; Cdl values were 24.6, 19.4, and 11.1 mF cm−2, respectively. PtNW-L2 aerogel showed nearly unchanged LSV after 1000 CV cycles.

Methods

  • Ligands L1 and L2 were synthesized and grafted to noble metal NBBs via ligand exchange in THF. Gels were prepared by dispersing ligand-capped NBBs in solvent with sonication, heating at 50 °C, and cooling to room temperature; aerogels were obtained by supercritical CO2 drying.
  • Characterization included FT-IR, SEM, TEM, XPS, XRD, TGA, nitrogen physisorption, rheology, and DMA; gelation was tested across a range of solvents.
  • HER measurements used a three-electrode system with glassy carbon working electrode, graphene auxiliary electrode, and Ag/AgCl reference. Catalyst ink (4 mg/mL, 5 μL on GCE, ∼0.14 mg cm−2) was tested by LSV at 5 mV/s; Cdl was measured by CV at 10–200 mV/s; stability was tested over 1000 cycles between −0.5 and −0.3 V vs Ag/AgCl, without iR compensation.

Limitations

  • Stated limitations: Not stated in the paper.
  • Evident from the text: HER stability is reported only after 1000 CV cycles; mechanical elasticity decreased with increasing compression; and polarization curves were obtained without iR compensation.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsanm.9b00401

Cites

62 of 62 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

2 Valid · 1 Not valid · 5 Not checked · 56 Own results and interpretations

29 more claims

Create a free account to see all 64 claims and to verify the 1 reference still open.

See all claims — free account
  • It may state two separate claims as one. 23
  • The quote only partly states this claim. 1
  • Probably not a substantial claim. 7

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

2 of 2

Citations

Cites

Show all 62 references

Research works printed but not linked: 1

  1. Mao B., 2009, Rare. Metal. Mater. Eng., 38, 516

Cited by

Metadata

Authors
Zheng, Y., Li, N., Mukherjee, S., Yang, Y., Yan, J., Liu, J., & Fang, Y.
Affiliations
Shaanxi Normal University (CN)
Corresponding author
  • Yan, Junlin
  • Liu, Jing
Venue
ACS Applied Nano Materials
Published
2019-04-29
Volume
2
Issue
5
Pages
3012-3020
ISSN
2574-0970 (ISSN-L)
OpenAlex
W2943410748
Cited by
15
References
57
Citations by year
2026: 2 · 2025: 3 · 2024: 2 · 2023: 1 · 2022: 1 · 2021: 4 · 2020: 2
FWCI
0.50
Type
journal article
Language
en
Open access
closed
Locations
ACS Applied Nano Materials (publishedVersion)
Funders
  • Ministry of Education of the People's Republic of China (201701004)
  • National Natural Science Foundation of China (21503128, 21573141)
  • Program of Introducing Talents of Discipline to Universities (B14041)
Topics
  • Physical Sciences › Materials Science › Biomaterials › Supramolecular Self-Assembly in Materials
  • Physical Sciences › Materials Science › Materials Chemistry › Aerogels and thermal insulation
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
Keywords
supramolecular gels, aerogels, ligand design, self-assembly, hydrogen evolution reaction, electrocatalysis, hydrogen bonding, supercritical drying, elastic aerogels, template-free synthesis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.