The DOI matches its Crossref record; 125 of the 125 references it cites were found in a registry or an index.
Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties
Abstract
Recent advances in the field of additive manufacturing (AM) or 3D printing, have garnered serious interest for its potential to substitute time-consuming and costly subtractive and formative manufacturing techniques. Material extrusion (MatEx), employing filament and pellet-based feedstocks, is an AM technique for fabricating three-dimensional objects dictated by a computer-aided design (CAD) file in a layer-by-layer manner. Being inherently a “melt-and-form” technique, the physics of MatEx is strongly dependent on the melt flow behavior of the polymers and hence on their rheology. The focus of this review article is to analyze the current progress in rheological characterizations of filament and pellet-based polymeric feedstocks for application in MatEx. The importance of shear and temperature-dependent viscosities in relation to consistent extrusion through the print nozzle and in the standoff region between nozzle and bed will be highlighted. The importance of shear and/or extensional viscosities and extent of die swell (upon exit from the nozzle) experienced by the polymers under processing parameters relevant to MatEx will be investigated. Postextrusion from the nozzle, the rheological characteristics of the viscous polymer melt as it cools once deposited on the print bed governs the degree of interlayer welding, that impacts the mechanical performance of the printed parts. Controlling and monitoring rheological properties such as zero-shear viscosities and shear moduli of the melt is of significant importance in this region in order to ensure proper mechanical robustness and shape integrity of the deposited layers. Both experimental and theoretical approaches based on polymer chain reptation mechanisms will be reviewed in detail and suggestions to address the existing limitations associated with the process will be provided. Fundamental understanding of the correlation between the classical theories and current understanding based on recent experimentation and analysis is expected to assist the design and development of the next generation of polymer feedstocks and machine designs for MatEx-based AM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Viscoelastic Properties of Polymers
Jones, W. M. (1981) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(81)80036-5 · Cited by 11,092
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Reptation of a Polymer Chain in the Presence of Fixed Obstacles
de Gennes, P. G. (1971) · The Journal of Chemical Physics · doi:10.1063/1.1675789 · Cited by 4,284
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Brereton, M. G. (1978) · Physics Bulletin · doi:10.1088/0031-9112/29/1/038 · Cited by 3,229
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Correlation of dynamic and steady flow viscosities
Cox, W. P., & Merz, E. H. (1958) · Journal of Polymer Science · doi:10.1002/pol.1958.1202811812 · Cited by 2,092
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Hyun, K., Wilhelm, M., Klein, C. O., Cho, K. S., Nam, J. G., Ahn, K. H., Lee, S. J., Ewoldt, R. H., & McKinley, G. H. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.002 · Cited by 1,655
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process
Bellehumeur, C., Li, L., Sun, Q., & Gu, P. (2004) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(04)70071-7 · Cited by 768
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
Nikzad, M., Masood, S. H., & Sbarski, I. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.01.056 · Cited by 503
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Additive manufacturing tooling for the automotive industry
Leal, R., Barreiros, F. M., Alves, L., Romeiro, F., Vasco, J. C., Santos, M., & Marto, C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0239-8 · Cited by 388
Computer-Aided Design for Additive Manufacturing of Cellular Structures
Rosen, D. W. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738493 · Cited by 376
Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials
Duty, C. E., Kunc, V., Compton, B., Post, B., Erdman, D., Smith, R., Lind, R., Lloyd, P., & Love, L. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2015-0183 · Cited by 375
Hashemi Sanatgar, R., Campagne, C., & Nierstrasz, V. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.112 · Cited by 368
What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
Duty, C., Ajinjeru, C., Kishore, V., Compton, B. G., Hmeidat, N. S., Chen, X., Liu, P., Hassen, A. A., Lindahl, J. M., & Kunc, V. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.008 · Cited by 367
Ding, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351
Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
Seppala, J. E., & Migler, K. B. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.007 · Cited by 322
Spoerk, M., Holzer, C., & Gonzalez‐Gutierrez, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48545 · Cited by 317
McIlroy, C., & Olmsted, P. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.051 · Cited by 308
Liquefier Dynamics in Fused Deposition
Bellini, A., Gu¨c¸eri, S., & Bertoldi, M. (2004) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1688377 · Cited by 297
Estimation of filament temperature and adhesion development in fused deposition techniques
Costa, S. F., Duarte, F. M., & Covas, J. A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.02.026 · Cited by 293
Kishore, V., Ajinjeru, C., Nycz, A., Post, B., Lindahl, J., Kunc, V., & Duty, C. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.008 · Cited by 292
Weld formation during material extrusion additive manufacturing
Seppala, J. E., Hoon Han, S., Hillgartner, K. E., Davis, C. S., & Migler, K. B. (2017) · Soft Matter · doi:10.1039/c7sm00950j · Cited by 291
Modification of Frenkel's model for sintering
Pokluda, O., Bellehumeur, C. T., & Vlachopoulos, J. (1997) · AIChE Journal · doi:10.1002/aic.690431213 · Cited by 281
The importance of rheological behavior in the additive manufacturing technique material extrusion
Mackay, M. E. (2018) · Journal of Rheology · doi:10.1122/1.5037687 · Cited by 266
Fatigue performance of fused filament fabrication PLA specimens
Gómez-Gras, G., Jerez‐Mesa, R., Travieso-Rodriguez, J. A., & Llumà, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.072 · Cited by 261
Effect of annealing time on the self-nucleation behavior of semicrystalline polymers
Lorenzo, A. T., Arnal, M. L., Sánchez, J. J., & Müller, A. J. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20832 · Cited by 245
Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing
Comminal, R., Serdeczny, M. P., Pedersen, D. B., & Spangenberg, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.013 · Cited by 243
Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C., & Sapkota, J. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.018 · Cited by 241
Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling
Ramanath, H. S., Chua, C. K., Leong, K. F., & Shah, K. D. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3203-6 · Cited by 239
Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101218 · Cited by 234
Self-citationGo, J., Schiffres, S. N., Stevens, A. G., & Hart, A. J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.03.007 · Cited by 223
Hart, K. R., Dunn, R. M., Sietins, J. M., Hofmeister Mock, C. M., Mackay, M. E., & Wetzel, E. D. (2018) · Polymer · doi:10.1016/j.polymer.2018.04.024 · Cited by 207
Bond and part strength in fused deposition modeling
Coogan, T. J., & Kazmer, D. O. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0050 · Cited by 206
Advances in healing-on-demand polymers and polymer composites
Zhang, P., & Li, G. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.11.005 · Cited by 202
Polymer Based Nanocomposites: Effect of Filler-Filler and Filler-Matrix Interactions
Bréchet, Y., Cavaillé, J.-Y., Chabert, E., Chazeau, L., Dendievel, R., Flandin, L., & Gauthier, C. (2001) · Advanced Engineering Materials · doi:10.1002/1527-2648(200108)3:8<571::aid-adem571>3.0.co;2-m · Cited by 196
A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites
Nguyen, N. A., Bowland, C. C., & Naskar, A. K. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.03.009 · Cited by 195
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Aho, J., Boetker, J. P., Baldursdottir, S., & Rantanen, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.009 · Cited by 191
A study of melt flow analysis of an ABS-Iron composite in fused deposition modelling process
Mostafa, N., Syed, H. M., Igor, S., & Andrew, G. (2009) · Tsinghua Science and Technology · doi:10.1016/s1007-0214(09)70063-x · Cited by 191
Feedstock material property – process relationships in fused deposition of ceramics (FDC)
Venkataraman, N., Rangarajan, S., Matthewson, M. J., Harper, B., Safari, A., Danforth, S. C., Wu, G., Langrana, N., Guceri, S., & Yardimci, A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010373344 · Cited by 188
Costakis, W. J., Rueschhoff, L. M., Diaz-Cano, A. I., Youngblood, J. P., & Trice, R. W. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.06.002 · Cited by 187
McIlroy, C., & Olmsted, P. D. (2017) · Journal of Rheology · doi:10.1122/1.4976839 · Cited by 182
Extensional Rheometry of Entangled Solutions
Bhattacharjee, P. K., Oberhauser, J. P., McKinley, G. H., Leal, L. G., & Sridhar, T. (2002) · Macromolecules · doi:10.1021/ma0118623 · Cited by 175
Spoerk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F., & Holzer, C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700143 · Cited by 169
Balani, S. B., Chabert, F., Nassiet, V., & Cantarel, A. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.012 · Cited by 167
Malmberg, A., Gabriel, C., Steffl, T., Münstedt, H., & Löfgren, B. (2002) · Macromolecules · doi:10.1021/ma010753l · Cited by 166
Cicala, G., Giordano, D., Tosto, C., Filippone, G., Recca, A., & Blanco, I. (2018) · Materials · doi:10.3390/ma11071191 · Cited by 166
Aho, J., Boetker, J. P., Genina, N., Edinger, M., Arnfast, L., & Rantanen, J. (2018) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2018.11.012 · Cited by 164
In-line rheological monitoring of fused deposition modeling
Coogan, T. J., & Kazmer, D. O. (2018) · Journal of Rheology · doi:10.1122/1.5054648 · Cited by 163
Healing simulation for bond strength prediction of FDM
Coogan, T. J., & Kazmer, D. O. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0051 · Cited by 158
Prediction of interlayer strength in material extrusion additive manufacturing
Coogan, T. J., & Kazmer, D. O. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101368 · Cited by 158
Tensile Properties of Processed FDM Polycarbonate Material
Masood, S. H., Mau, K., & Song, W. (2010) · Materials science forum · doi:10.4028/www.scientific.net/msf.654-656.2556 · Cited by 153
Anderegg, D. A., Bryant, H. A., Ruffin, D. C., Skrip, S. M., Fallon, J. J., Gilmer, E. L., & Bortner, M. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.01.002 · Cited by 142
Self-citationRheological and heat transfer effects in fused filament fabrication
Phan, D. D., Swain, Z. R., & Mackay, M. E. (2018) · Journal of Rheology · doi:10.1122/1.5022982 · Cited by 138
Multiphysics modelling of manufacturing processes: A review
Jabbari, M., Baran, İ., Mohanty, S., Comminal, R. B., Sonne, M. R., Nielsen, M. W., Spangenberg, J., & Hattel, J. H. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018766188 · Cited by 136
Peterson, A. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.030 · Cited by 134
Stadler, F. J., Piel, C., Klimke, K., Kaschta, J., Parkinson, M., Wilhelm, M., Kaminsky, W., & Münstedt, H. (2006) · Macromolecules · doi:10.1021/ma0514018 · Cited by 127
Numerical simulations of the mesostructure formation in material extrusion additive manufacturing
Serdeczny, M. P., Comminal, R. B., Pedersen, D. B., & Spangenberg, J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.024 · Cited by 125
Serdeczny, M. P., Comminal, R. B., Pedersen, D. B., et al. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100997 · Cited by 116
Northcutt, L., Orski, S. V., Migler, K. B., & Kotula, A. P. (2018) · Polymer · doi:10.1016/j.polymer.2018.09.018 · Cited by 115
Interfacial mechanical behavior of 3D printed ABS
Cole, D. P., Riddick, J. C., Jaim, H. M. I., Strawhecker, K. E., & Zander, N. E. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43671 · Cited by 113
Material Extrusion Additive Manufacturing of Wood and Lignocellulosic Filled Composites
Lamm, M. E., Wang, L., Kishore, V., Tekinalp, H., Kunc, V., Wang, J., Gardner, D. J., & Ozcan, S. (2020) · Polymers · doi:10.3390/polym12092115 · Cited by 107
Peres, A. M., Pires, R. R., & Oréfice, R. L. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.047 · Cited by 104
An adaptable FEA simulation of material extrusion additive manufacturing heat transfer in 3D
D’Amico, T., & Peterson, A. M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.021 · Cited by 104
The performance of the hot end in a plasticating 3D printer
Mackay, M. E., Swain, Z. R., Banbury, C., Phan, D. D., & Edwards, D. A. (2017) · Journal of Rheology · doi:10.1122/1.4973852 · Cited by 101
Planar deposition flow modeling of fiber filled composites in large area additive manufacturing
Heller, B. P., Smith, D. E., & Jack, D. A. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.031 · Cited by 98
McIlroy, C., & Olmsted, P. D. (2024) · Figshare · Cited by 95
Phan, D. D., Horner, J., Swain, Z. R., Beris, A. N., & Mackay, M. E. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101161 · Cited by 94
Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds
Calafel, I., Aguirresarobe, R., Peñas, M. I., Santamaría, A., Tierno, M., Conde, J. I., & Pascual, B. (2020) · Materials · doi:10.3390/ma13010178 · Cited by 85
A Novel Approach to Additive Manufacturing: Screw Extrusion 3D-Printing
Valkenaers, H., Vogeler, F., Ferraris, E., Voet, A., & Kruth, J.-P. (2013) · International Conference on Multi-Material Micro Manufacture (4M) · doi:10.3850/978-981-07-7247-5-359 · Cited by 79
Zaldivar, R. J., McLouth, T. D., Ferrelli, G. L., Patel, D., Hopkins, A. R., & Witkin, D. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.022 · Cited by 74
Perspectives on the viscoelasticity and flow behavior of entangled linear and branched polymers
Snijkers, F., Pasquino, R., Olmsted, P. D., & Vlassopoulos, D. (2015) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/27/47/473002 · Cited by 73
Influence of temperature on polymer parts manufactured by fused deposition modeling process
Bhalodi, D. V., Zalavadiya, K. S., & Gurrala, P. K. (2019) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-019-1616-z · Cited by 73
Fitzharris, E. R., Watt, I., Rosen, D. W., & Shofner, M. L. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.003 · Cited by 72
Material Extrusion-Based Additive Manufacturing with Blends of Polypropylene and Hydrocarbon Resins
Das, A., Marnot, A., Fallon, J. J., Martin, S. M., Joseph, E. G., & Bortner, M. J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b01127 · Cited by 71
Self-citationAjinjeru, C., Kishore, V., Lindahl, J., Sudbury, Z., Hassen, A. A., Post, B., Love, L., Kunc, V., & Duty, C. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2510-z · Cited by 70
Costanzo, A., Spotorno, R., Candal, M. V., Fernández, M. M., Müller, A. J., Graham, R., Cavallo, D., & McIlroy, C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101415 · Cited by 70
Wang, L., Gardner, D. J., & Bousfield, D. W. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24615 · Cited by 68
Ajinjeru, C., Kishore, V., Liu, P., Lindahl, J. M., Hassen, A. A., Kunc, V., Post, B., Love, L. J., & Duty, C. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.004 · Cited by 68
Hart, K. R., Dunn, R. M., & Wetzel, E. D. (2020) · Polymer · doi:10.1016/j.polymer.2020.123091 · Cited by 66
Rheological approach for an additive manufacturing printer based on material extrusion
Sanchez, L. C., Beatrice, C. A. G., Lotti, C., Marini, J., Bettini, S. H. P., & Costa, L. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04376-9 · Cited by 65
Rheological properties of wood polymer composites at high shear rates
Lewandowski, K., Piszczek, K., Zajchowski, S., & Mirowski, J. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.02.004 · Cited by 64
Additive manufacturing of heat-sensitive polymer melt using a pellet-fed material extrusion
Zhou, Z., Salaoru, I., Morris, P., & Gibbons, G. J. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.040 · Cited by 62
Balani, S. B., Chabert, F., Nassiet, V., Cantarel, A., & Garnier, C. (2017) · AIP conference proceedings · doi:10.1063/1.5008034 · Cited by 61
Nonlinear rheology of polydisperse blends of entangled linear polymers: Rolie-Double-Poly models
Boudara, V. A. H., Peterson, J. D., Leal, L. G., & Read, D. J. (2018) · Journal of Rheology · doi:10.1122/1.5052320 · Cited by 61
Ko, Y. S., Herrmann, D., Tolar, O., Elspass, W. J., & Brändli, C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100815 · Cited by 57
Chatham, C. A., Zawaski, C. E., Bobbitt, D. C., Moore, R. B., Long, T. E., & Williams, C. B. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800764 · Cited by 54
Ajinjeru, C., Kishore, V., Chen, X., Hershey, C. J., Lindahl, J. M., Kunc, V., Hassen, A. A., & Duty, C. (2019) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719873941 · Cited by 52
Prajapati, H., Chalise, D., Ravoori, D., Taylor, R. M., & Jain, A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.01.004 · Cited by 47
D’Amico, T., & Peterson, A. M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101239 · Cited by 46
Das, A., McIlroy, C., & Bortner, M. J. (2020) · Progress in Additive Manufacturing · doi:10.1007/s40964-020-00137-3 · Cited by 43
Self-citationRheology and 3D Printability of Percolated Graphene–Polyamide-6 Composites
Lee, K. P. M., Brandt, M., Shanks, R. A., & Daver, F. (2020) · Polymers · doi:10.3390/polym12092014 · Cited by 41
Kotula, A. P., & Migler, K. B. (2017) · Journal of Rheology · doi:10.1122/1.5008381 · Cited by 40
Thermo-rheological effects on successful 3D printing of biodegradable polyesters
Candal, M. V., Calafel, I., Aranburu, N., Fernández, M., Guerrica‐Echevarría, G., Santamaría, A., & Müller, A. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101408 · Cited by 40
Tang, T. O., Holmes, S., Dean, K., & Simon, G. P. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48777 · Cited by 39
Liu, P., Dinwiddie, R. B., Keum, J. K., Vasudevan, R. K., Jesse, S., Nguyen, N. A., Lindahl, J. M., & Kunc, V. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.09.010 · Cited by 38
The role of heating and cooling in viscous sintering of pairs of spheres and pairs of cylinders
Polychronopoulos, N. D., & Vlachopoulos, J. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2019-0162 · Cited by 38
Nonisothermal welding in fused filament fabrication
Coasey, K. R., Hart, K. R., Wetzel, E. D., Edwards, D., & Mackay, M. E. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101140 · Cited by 36
O’Mahony, C., Gkartzou, E., Haq, E. U., Koutsoumpis, S., Silien, C., Charitidis, C. A., & Tofail, S. A. M. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09859-6 · Cited by 32
Srinivas, V., van Hooy‐Corstjens, C. S. J., Rastogi, S., & Harings, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122637 · Cited by 31
Pressure and shear rate dependence of the viscosity and stress relaxation of polymer melts
Reynolds, C. D., Thompson, R. L., & McLeish, T. C. B. (2018) · Journal of Rheology · doi:10.1122/1.5012969 · Cited by 30
Shadvar, N., Foroozmehr, E., Badrossamay, M., Amouhadi, I., & Dindarloo, A. S. (2019) · International Journal of Material Forming · doi:10.1007/s12289-019-01523-1 · Cited by 30
Polymer-Based Additive Manufacturing: Recent Developments
Seppala1, J. E., Kotula2, A. P., & Snyder3, C. R. (2019) · ACS symposium series · doi:10.1021/bk-2019-1315 · Cited by 30
Quintana, J. L. C., Hiemer, S., Duarte, N. G., & Osswald, T. A. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101687 · Cited by 29
Rheology of Polymer Melts—A Correlation of Dynamic and Steady Flow Measurements
Cox, W. P., & Merz, E. H. (1959) · doi:10.1520/stp44206s · Cited by 28
Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion
McIlroy, C., Seppala, J. E., & Kotula, A. P. (2019) · ACS symposium series · doi:10.1021/bk-2019-1315.ch006 · Cited by 23
Collective viscosity model for shear thinning polymeric materials
Kim, S. K. (2019) · Rheologica Acta · doi:10.1007/s00397-019-01180-w · Cited by 22
High shear capillary rheometry of cellulose nanocrystals for industrially relevant processing
Sutliff, B. P., Das, A., Youngblood, J. P., & Bortner, M. J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115735 · Cited by 21
Self-citationZawaski, C. E., Wilts, E. M., Chatham, C. A., Stevenson, A. T., Pekkanen, A. M., Li, C., Tian, Z., Whittington, A. R., Long, T. E., & Williams, C. B. (2019) · Polymer · doi:10.1016/j.polymer.2019.06.005 · Cited by 20
Peñas, M. I., Calafel, I., Aguirresarobe, R., Tierno, M., Conde, J. I., Pascual, B., & Santamaría, A. (2020) · Polymers · doi:10.3390/polym12092070 · Cited by 17
A frequency-dependent effective medium model for the rheology of crystallizing polymers
Kotula, A. P. (2020) · Journal of Rheology · doi:10.1122/1.5132407 · Cited by 15
Cited by
Outrequin, T. C. R., Gamonpilas, C., Siriwatwechakul, W., & Sreearunothai, P. (2023) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2022.111371 · Cited by 113
Ahmad, N. D., Kusmono, Wildan, M. W., & Herianto (2023) · Results in Engineering · doi:10.1016/j.rineng.2022.100842 · Cited by 103
Metadata
- Authors
- Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-02-08
- Volume
- 3
- Issue
- 3
- Pages
- 1218-1249
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W3127534277
- Cited by
- 305
- References
- 125
- FWCI
- 13.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.