The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Polypropylene Plastic Waste Conversion to Lubricants over Ru/TiO2 Catalysts
Abstract
Plastic recycling and upcycling are required to combat the environmental crisis from landfilling consumer products. Chemocatalytic technologies are the most promising approach to achieve this. Here, we show that ruthenium deposited on titania is an active and selective catalyst in polypropylene breakdown into valuable lubricant-range hydrocarbons with narrow molecular weight distribution and a low methane formation at low temperatures of 250 °C with a modest H 2 pressure. Amorphous polypropylene and everyday bags and bottles were also effectively converted to lubricants with yields up to 80+%. Quantification of critical properties, including pour point, kinematic viscosity, and viscosity index, indicates that the products are promising alternatives to currently used base or synthetic oils. The reaction network involves the sequential conversion of polymer into the oil with a gradual decrease of molecular weight until ∼700–800 g/mol and slow liquid gasification to methane and ethane. NMR, ATR-IR, GCMS, and isotopic labeling experiments expose the complexity of structure and reaction evolution whereby hydrogenolysis involves intermediate dehydrogenation with synchronous loss of polypropylene stereoregularity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Future Scenarios of Global Plastic Waste Generation and Disposal
Lebreton, L., & Andrady, A. (2019) · Palgrave Communications · doi:10.1057/s41599-018-0212-7 · Cited by 2,327
Chemical recycling of waste plastics for new materials production
Rahimi, A., & García, J. M. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0046 · Cited by 2,121
The future of plastics recycling
Garcia, J. M., & Robertson, M. L. (2017) · Science · doi:10.1126/science.aaq0324 · Cited by 1,346
Ewen, J. A. (1984) · Journal of the American Chemical Society · doi:10.1021/ja00333a041 · Cited by 916
Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization
Zhang, F., Zeng, M., Yappert, R. D., Sun, J., Lee, Y.-H., LaPointe, A. M., Peters, B., Abu-Omar, M. M., & Scott, S. L. (2020) · Science · doi:10.1126/science.abc5441 · Cited by 882
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
Plastic waste to fuels by hydrocracking at mild conditions
Liu, S., Kots, P. A., Vance, B. C., Danielson, A., & Vlachos, D. G. (2021) · Science Advances · doi:10.1126/sciadv.abf8283 · Cited by 583
Self-citationUpcycling Single-Use Polyethylene into High-Quality Liquid Products
Celik, G., Kennedy, R. M., Hackler, R. A., Ferrandon, M., Tennakoon, A., Patnaik, S., LaPointe, A. M., Ammal, S. C., Heyden, A., Perras, F. A., et al. (2019) · ACS Central Science · doi:10.1021/acscentsci.9b00722 · Cited by 561
Catalytic upcycling of high-density polyethylene via a processive mechanism
Tennakoon, A., Wu, X., Paterson, A. L., Patnaik, S., Pei, Y., LaPointe, A. M., Ammal, S. C., Hackler, R. A., Heyden, A., Slowing, I. I., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-00519-4 · Cited by 524
Raheem, A. B., Noor, Z. Z., Hassan, A., Abd Hamid, M. K., Samsudin, S. A., & Sabeen, A. H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.019 · Cited by 496
Microstructure of polypropylene
Busico, V., & Cipullo, R. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00046-0 · Cited by 485
Conversion of Polyolefin Waste to Liquid Alkanes with Ru-Based Catalysts under Mild Conditions
Rorrer, J. E., Beckham, G. T., & Román-Leshkov, Y. (2021) · JACS Au · doi:10.1021/jacsau.0c00041 · Cited by 409
Low-temperature catalytic upgrading of waste polyolefinic plastics into liquid fuels and waxes
Nakaji, Y., Tamura, M., Miyaoka, S., Kumagai, S., Tanji, M., Nakagawa, Y., Yoshioka, T., & Tomishige, K. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119805 · Cited by 328
Life Cycle assessment of a plastic packaging recycling system
Arena, U., Mastellone, M. L., & Perugini, F. (2003) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978432 · Cited by 261
He, Z., Li, G., Chen, J., Huang, Y., An, T., & Zhang, C. (2015) · Environment International · doi:10.1016/j.envint.2015.01.004 · Cited by 236
Bora, R. R., Wang, R., & You, F. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c06311 · Cited by 214
Infrared and Raman spectroscopy of polypropylene
Andreassen, E. (1999) · Polymer Science and Technology Series · doi:10.1007/978-94-011-4421-6_46 · Cited by 176
Flaherty, D. W., & Iglesia, E. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4093743 · Cited by 164
Poly‐α‐olefin‐based synthetic lubricants: a short review on various synthetic routes
Ray, S., Rao, P. V. C., & Choudary, N. V. (2011) · Lubrication Science · doi:10.1002/ls.166 · Cited by 158
Synthetics, Mineral Oils, and Bio-Based Lubricants
Rudnick, L. R. (2020) · CRC Press eBooks · doi:10.1201/9781315158150 · Cited by 129
Environmental Impact of Pyrolysis of Mixed WEEE Plastics Part 1: Experimental Pyrolysis Data
Alston, S. M., Clark, A., Arnold, C., et al. (2011) · Environmental Science & Technology · doi:10.1021/es201664h · Cited by 105
Kang, J., Chen, J., Cao, Y. Q., & Li, H. (2009) · Polymer · doi:10.1016/j.polymer.2009.11.018 · Cited by 94
Regioselectivity and Reaction Mechanism of Ru‐Catalyzed Hydrogenolysis of Squalane and Model Alkanes
Nakagawa, Y., Oya, S., Kanno, D., Nakaji, Y., Tamura, M., & Tomishige, K. (2016) · ChemSusChem · doi:10.1002/cssc.201601204 · Cited by 89
Renewable lubricants with tailored molecular architecture
Liu, S., Josephson, T. R., Athaley, A., Chen, Q. P., Norton, A. M., Ierapetritou, M., Siepmann, J. I., Saha, B., & Vlachos, D. G. (2019) · Science Advances · doi:10.1126/sciadv.aav5487 · Cited by 78
Self-citationComparing Rate and Mechanism of Ethane Hydrogenolysis on Transition-Metal Catalysts
Almithn, A. S., & Hibbitts, D. D. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b11070 · Cited by 68
Nakaji, Y., Nakagawa, Y., Tamura, M., & Tomishige, K. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.03.038 · Cited by 42
Zhao, X., & You, F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.116129 · Cited by 40
Theoretical investigation of the chain length effects on the NMR chemical shifts of oligomers
d’Antuono, P., Botek, E., & Champagne, B. R. (2006) · International Journal of Quantum Chemistry · doi:10.1002/qua.21075 · Cited by 8
Cited by
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Chen, J., Wu, J., Sherrell, P. C., Chen, J., Wang, H., Zhang, W., & Yang, J. (2022) · Advanced Science · doi:10.1002/advs.202103764 · Cited by 398
Rational Design of Chemical Catalysis for Plastic Recycling
Chu, M., Liu, Y., Lou, X., Zhang, Q., & Chen, J. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c01286 · Cited by 392
Catalytic Upcycling of Polyolefins
Sun, J., Dong, J., Gao, L., Zhao, Y.-Q., Moon, H., & Scott, S. L. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00943 · Cited by 317
Zhang, F., Wang, F., Wei, X., Yang, Y., Xu, S., Deng, D., & Wang, Y.-Z. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.12.052 · Cited by 269
Metadata
- Authors
- Kots, P. A., Liu, S., Vance, B. C., Wang, C., Sheehan, J. D., & Vlachos, D. G.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-06-18
- Volume
- 11
- Issue
- 13
- Pages
- 8104-8115
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W3173250669
- Cited by
- 262
- References
- 29
- FWCI
- 11.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.