The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Enhancing Water Oxidation Catalysis on a Synergistic Phosphorylated NiFe Hydroxide by Adjusting Catalyst Wettability
Abstract
Surface wettability is very important for designing and developing heterogeneous electrocatalysts that can be applied in an aqueous environment. Here, by adjusting the surface wettability of the catalyst using a facile two-step strategy, a porous nanosheet electrocatalyst composed of NiFe hydroxide and NiFe phosphate (denoted as NiFe/NiFe:Pi), has been designed and developed. The two-step strategy not only allows us to successfully control the morphology but also provides an approach to modify the surface chemical property of a catalyst. After phosphorylation, the surface wettability of the NiFe/NiFe:Pi catalyst is significantly enhanced (contact angle 44 ± 3°) in comparison to that of NiFe hydroxide electrode without phosphorylation (contact angle 129 ± 5°). Serving as an oxygen evolution catalyst in 1 M KOH aqueous solution, the NiFe/NiFe:Pi electrode yields strong synergistic oxygen evolution activity to deliver a current density of 10 mA cm –2 with an overpotential merely of 290 mV. The catalyst also exhibits extraordinary high current densities of 300 mA cm –2 at an extremely low overpotential of 340 mV, which is among the best Ni-based OER electrocatalysts to date. The well-maintained open porous nanosheet structure, enhanced surface wettability, and increased charge transfer rate at the NiFe/NiFe:Pi catalyst, together with effective mass transport and enlarged catalytic active sites offered by the hierarchical porous structure, contribute to the extraordinary water oxidation performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Benchmarking Heterogeneous Electrocatalysts for the Oxygen Evolution Reaction
McCrory, C. C. L., Jung, S., Peters, J. C., & Jaramillo, T. F. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407115p · Cited by 7,026
Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives
Suen, N.-T., Hung, S.-F., Quan, Q., Zhang, N., Xu, Y.-J., & Chen, H. M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00328a · Cited by 6,307
Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions
Jiao, Y., Zheng, Y., Jaroniec, M., & Qiao, S. Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00470a · Cited by 5,388
Water photolysis at 12.3% efficiency via perovskite photovoltaics and Earth-abundant catalysts
Luo, J., Im, J.-H., Mayer, M. T., Schreier, M., Nazeeruddin, M. K., Park, N.-G., Tilley, S. D., Fan, H. J., & Grätzel, M. (2014) · Science · doi:10.1126/science.1258307 · Cited by 2,509
Anantharaj, S., Ede, S. R., Sakthikumar, K., Karthick, K., Mishra, S., & Kundu, S. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b02479 · Cited by 2,503
Liang, H., Meng, F., Cabán-Acevedo, M., Li, L., Forticaux, A., Xiu, L., Wang, Z., & Jin, S. (2015) · Nano Letters · doi:10.1021/nl504872s · Cited by 987
Peng, Z., Jia, D., Al‐Enizi, A. M., Elzatahry, A. A., & Zheng, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402031 · Cited by 494
Cited by
Fe-Based Electrocatalysts for Oxygen Evolution Reaction: Progress and Perspectives
Feng, C., Faheem, M. B., Fu, J., Xiao, Y., Li, C., & Li, Y. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b05445 · Cited by 587
Self-citationRong, C., Shen, X., Wang, Y., Thomsen, L., Zhao, T., Li, Y., Lu, X., Amal, R., & Zhao, C. (2022) · Advanced Materials · doi:10.1002/adma.202110103 · Cited by 503
Self-citationRu-doped 3D flower-like bimetallic phosphide with a climbing effect on overall water splitting
Chen, D., Lu, R., Pu, Z., Zhu, J., Li, H.-W., Liu, F., Hu, S., Luo, X., Wu, J., Zhao, Y., et al. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119396 · Cited by 400
Han, X., Wu, X., Deng, Y., Liu, J., Lu, J., Zhong, C., & Hu, W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800935 · Cited by 375
Thangavel, P., Ha, M., Kumaraguru, S., Meena, A., Singh, A. N., Harzandi, A. M., & Kim, K. S. (2020) · Energy & Environmental Science · doi:10.1039/d0ee00877j · Cited by 303
Metadata
- Authors
- Li, Y., & Zhao, C.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-10
- Volume
- 7
- Issue
- 4
- Pages
- 2535-2541
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2594196206
- Cited by
- 346
- References
- 7
- FWCI
- 11.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
