The DOI matches its Crossref record; 233 of the 233 references it cites were found in a registry or an index.
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Abstract
Because interfacial nonradiative recombination (NRR) has a significant influence on device performance, the minimization of interfacial NRR losses through interface engineering especially for perovskite-related interfaces is key to achieving efficient, stable, and hysteresis-free perovskite solar cells (PSCs). In light of important contributions of interface engineering to rapid development of PSCs, a systematic investigation and analysis on the latest research advancements on interface engineering is urgently needed. This Review aims at providing innovative insights into further improvement in power conversion efficiency (PCE) toward the Shockley–Queisser limit efficiency and stability fulfilling commercially available standard protocols as well as reduction of hysteresis. In this Review, the roles and importance of interfaces in PSCs are first highlighted from the viewpoint of device structure, working principles, and interfacial carrier dynamics. The main origins (i.e., interface defects, imperfect energy level alignment (ELA), and interfacial reactions) of interfacial NRR are then discussed in detail along with characterization techniques. Subsequently, the effects of interfacial NRR on PCE, stability, and hysteresis are investigated. Strategies for mitigating interfacial NRR are provided in terms of defect passivation, ELA modulation, and suppression of interfacial reaction, where the critical roles of functional groups of interface modifiers are emphasized. Finally, we provide an outlook for efficient, hysteresis-free, and long-term operationally stable PSCs achievable via interface engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–233 of 233
Zhang, F., Song, J., Hu, R., Xiang, Y., He, J., Hao, Y., Lian, J., Zhang, B., Zeng, P., & Qu, J. (2018) · Small · doi:10.1002/smll.201704007 · Cited by 146
Li, C., Wei, J., Sato, M., Koike, H., Xie, Z.-Z., Li, Y.-Q., Kanai, K., Kera, S., Ueno, N., & Tang, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02692 · Cited by 143
Cai, F., Yang, L., Yu, Y., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02317k · Cited by 137
Tavakoli, M. M., Bi, D., Pan, L., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800275 · Cited by 132
Interface Design for Metal Halide Perovskite Solar Cells
Schulz, P. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00404 · Cited by 129
Park, C., Ko, H., Sin, D. H., Song, K. C., & Cho, K. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703546 · Cited by 127
Wang, Y., Yue, Y., Yang, X., & Han, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800249 · Cited by 125
Mixed Halide Perovskite Solar Cells. Consequence of Iodide Treatment on Phase Segregation Recovery
Balakrishna, R. G., Kobosko, S. M., & Kamat, P. V. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01450 · Cited by 118
Qin, C., Matsushima, T., Fujihara, T., Potscavage, W. J., & Adachi, C. (2015) · Advanced Materials · doi:10.1002/adma.201502610 · Cited by 117
Wen, T. Y., Yang, S., Liu, P. F., Tang, L. J., Qiao, H. W., Chen, X., Yang, H. G., Hou, Y., & Yang, H. G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703143 · Cited by 111
Double‐Side‐Passivated Perovskite Solar Cells with Ultra‐low Potential Loss
Zhao, Y., Li, Q., Zhou, W., Hou, Y., Zhao, Y. L., Fu, R., Yu, D., Liu, X., & Zhao, Q. (2018) · Solar RRL · doi:10.1002/solr.201800296 · Cited by 109
Metal Cations in Efficient Perovskite Solar Cells: Progress and Perspective
Wang, K., Subhani, W. S., Wang, Y., Zuo, X., Wang, H., Duan, L., & Liu, S. F. (2019) · Advanced Materials · doi:10.1002/adma.201902037 · Cited by 108
Benetti, D., Jokar, E., Yu, C.-H., Fathi, A., Zhao, H., Vomiero, A., Diau, E. W., & Rosei, F. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.05.084 · Cited by 107
Starr, D. E., Sadoughi, G., Handick, E., Wilks, R. G., Alsmeier, J. H., Köhler, L., Gorgoi, M., Snaith, H. J., & Bär, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00403a · Cited by 105
Meggiolaro, D., Mosconi, E., & Angelis, F. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01244 · Cited by 105
Cao, T., Chen, K., Chen, Q., Zhou, Y., Chen, N., & Li, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b09238 · Cited by 104
High Speed Epitaxial Perovskite Memory on Flexible Substrates
Bakaul, S. R., Serrao, C. R., Lee, O., Lu, Z., Yadav, A. K., Carraro, C., Maboudian, R., Ramesh, R., & Salahuddin, S. (2017) · Advanced Materials · doi:10.1002/adma.201605699 · Cited by 99
Li, Z., Wang, L., Liu, R., Fan, Y., Meng, H., Shao, Z., Cui, G., & Pang, S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902142 · Cited by 98
Interfacial engineering by using self-assembled monolayer in mesoporous perovskite solar cell
Li, B., Chen, Y., Liang, Z., Gao, D., & Huang, W. (2015) · RSC Advances · doi:10.1039/c5ra17129f · Cited by 94
Ji, F., Pang, S., Zhang, L., Zong, Y., Cui, G., Padture, N. P., & Zhou, Y. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00980 · Cited by 93
Decreasing Charge Losses in Perovskite Solar Cells Through mp-TiO2/MAPI Interface Engineering
Marín‐Beloqui, J. M., Lanzetta, L., & Palomares, E. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03902 · Cited by 84
Deep Defect States in Wide-Band-Gap ABX3 Halide Perovskites
Levine, I., Vera, O., Kulbak, M., Ceratti, D. R., Rehermann, C., Marquez, J. A., Levcenko, S., Unold, T., Hodes, G., Balberg, I., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00709 · Cited by 84
Improved Performance and Reliability of p‐i‐n Perovskite Solar Cells via Doped Metal Oxides
Savva, A., Burgués‐Ceballos, I., & Choulis, S. A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600285 · Cited by 79
Rosenberg, J. W., Legodi, M. J., Rakita, Y., Cahen, D., & Diale, M. M. (2017) · Journal of Applied Physics · doi:10.1063/1.4995970 · Cited by 63
Yang, L., Wu, M., Cai, F., Wang, P., Gurney, R. S., Liu, D., Xia, J., & Wang, T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02584c · Cited by 60
Effect of interlayer spacing in layered perovskites on resistive switching memory
Kim, S., Yang, J., Choi, E., & Park, N. (2019) · Nanoscale · doi:10.1039/c9nr00438f · Cited by 58
Self-citationLinking Chemistry at the TiO2/CH3NH3PbI3 Interface to Current–Voltage Hysteresis
Kerner, R. A., & Rand, B. P. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00712 · Cited by 50
He, J., Jiang, G., Xing, W., Xiong, W., Zhang, X., Wang, B., Zhang, H., & Zheng, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06020 · Cited by 47
Perovskite Solar Cell: Research Direction for Next 10 Years
Park, N. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02442 · Cited by 46
Self-citationLabram, J. G., & Chabinyc, M. L. (2017) · Journal of Applied Physics · doi:10.1063/1.4990802 · Cited by 32
Jiang, Y., Li, J., Xiong, S., Jiang, F., Liu, T., Qin, F., Hu, L., & Zhou, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04851c · Cited by 29
Guse, J. A., Soufiani, A. M., Jiang, L., Kim, J., Cheng, Y., Schmidt, T. W., Ho-Baillie, A. W. Y., & McCamey, D. R. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp07360j · Cited by 22
Chen, J., Sheng, Y., Ko, S.-G., Liu, L., Han, H., & Li, X. (2015) · New Journal of Chemistry · doi:10.1039/c5nj00569h · Cited by 18
Self-citation
Cited by
All-perovskite tandem solar cells with improved grain surface passivation
Lin, R., Xu, J., Wei, M., Wang, Y., Qin, Z., Liu, Z., Wu, J., Xiao, K., Chen, B., Park, S. M., et al. (2022) · Nature · doi:10.1038/s41586-021-04372-8 · Cited by 1,085
Next-generation applications for integrated perovskite solar cells
Bati, A. S. R., Zhong, Y. L., Burn, P. L., Nazeeruddin, M. K., Shaw, P. E., & Batmunkh, M. (2023) · Communications Materials · doi:10.1038/s43246-022-00325-4 · Cited by 492
Li, H., Zhang, C., Gong, C., Zhang, D., Zhang, H., Zhuang, Q., Yu, X., Gong, S., Chen, X., Yang, J., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01295-8 · Cited by 404
Self-citationYou, S., Eickemeyer, F. T., Gao, J., Yum, J.-H., Zheng, X., Ren, D., Xia, M., Guo, R., Rong, Y., Zakeeruddin, S. M., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01249-0 · Cited by 286
Liu, B., Bi, H., He, D., Bai, L., Wang, W., Yuan, H., Song, Q., Su, P., Zang, Z., Zhou, T., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00794 · Cited by 276
Self-citation
Metadata
- Authors
- Chen, J., & Park, N.-G.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-07-27
- Volume
- 5
- Issue
- 8
- Pages
- 2742-2786
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W3046074526
- Cited by
- 521
- References
- 233
- FWCI
- 23.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.