The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells
Abstract
Interfacial trap-assisted non-radiative recombination and residual stress impede the further increase of power conversion efficiency (PCE) and stability of the methylammonium-free (MA-free) perovskite solar cells (PSCs). Here, we report an interfacial defect passivation and stress release strategy through employing the multi-active-site Lewis base ligand (i.e., (5-mercapto-1,3,4-thiadiazol-2-ylthio)acetic acid (MTDAA)) to modify the surface and grain boundaries (GBs) of MA-free perovskite films. Both experimental and theoretical results confirm strong chemical interactions between multiple active sites in the MTDAA molecule and undercoordinated Pb 2+ at the surface or GBs of perovskite films. It is demonstrated theoretically that multi-active-site adsorption is more favorable thermodynamically as compared to single-active-site adsorption, regardless of PbI 2 termination and formamidinium iodide (FAI) termination types. MTDAA modification results in much reduced defect density, increased carrier lifetime, and almost thoroughly released interfacial residual stress. Upon MTDAA passivation, the PCE is boosted from 20.26% to 21.92%. The unencapsulated device modified by MTDAA maintains 99% of its initial PCE after aging under the relative humidity range of 10–20% for 1776 h, and 91% after aging at 60 °C for 1032 h.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
Cited by
Li, H., Zhang, C., Gong, C., Zhang, D., Zhang, H., Zhuang, Q., Yu, X., Gong, S., Chen, X., Yang, J., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01295-8 · Cited by 404
Self-citationLessons learned: how to report XPS data incorrectly about lead-halide perovskites
Li, C., Zhang, N., & Gao, P. (2023) · Materials Chemistry Frontiers · doi:10.1039/d3qm00574g · Cited by 295
Liu, W., Lu, Y., Wei, D., Huo, X., Huang, X., Li, Y., Meng, J., Zhao, S., Qiao, B., Liang, Z., et al. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta04788h · Cited by 52
Metadata
- Authors
- Liu, B., Bi, H., He, D., Bai, L., Wang, W., Yuan, H., Song, Q., Su, P., Zang, Z., Zhou, T., & Chen, J.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-06-18
- Volume
- 6
- Issue
- 7
- Pages
- 2526-2538
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W3175342719
- Cited by
- 276
- References
- 69
- FWCI
- 14.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells. https://app.cochat.ai/papers/10.1021/acsenergylett.1c00794
- The paper
- Liu, B., Bi, H., He, D., Bai, L., Wang, W., Yuan, H., Song, Q., Su, P., Zang, Z., Zhou, T., & Chen, J. (2021). Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells. ACS Energy Letters. https://doi.org/10.1021/acsenergylett.1c00794
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.