Quasi-Two-Dimensional Perovskite Solar Cells with Efficiency Exceeding 22%
The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
Quasi-two-dimensional (quasi-2D) perovskites have attracted attention because they have better stability than the 3D counterpart. However, power conversion efficiency of perovskite solar cells (PSCs) based on quasi-2D perovskite still lags behind those of the devices with 3D perovskites. We report here on a quasi-2D PSC employing an alternating cation perovskite of multidimensional hybrid GA(MA) n Pb n I 3 n +1 ( n = 5) with a PCE over 22%, which is enabled by post-treatment with amphoteric imidazolium iodide (ImI). An optimal concentration of ImI reduces trap density and enhances charge mobility because of the improved phase purity and crystallinity, which eventually leads to a PCE of 22.26% with an open-circuit voltage of 1.19 V, a fill factor of 0.81, and a short-circuit current density of 22.99 mA/cm 2 . Moreover, a light-soaking stability test shows that ca. 94% of initial PCE is maintained after over 1200 h. The PCE achieved in this work is a record among the reported quasi-2D PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationSurface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Planar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells
Kim, G., Min, H., Lee, K. S., Lee, D. Y., Yoon, S. M., & Seok, S. I. (2020) · Science · doi:10.1126/science.abc4417 · Cited by 1,346
Space-Charge Limited Photocurrent
Mihailetchi, V. D., Wildeman, J., & Blom, P. W. M. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.126602 · Cited by 1,130
Zhang, W., Pathak, S., Sakai, N., Stergiopoulos, T., Nayak, P. K., Noel, N. K., Haghighirad, A. A., Burlakov, V. M., deQuilettes, D. W., Sadhanala, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms10030 · Cited by 766
Liu, Y., Akin, S., Pan, L., Uchida, R., Arora, N., Milić, J. V., Hinderhofer, A., Schreiber, F., Uhl, A. R., Zakeeruddin, S. M., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw2543 · Cited by 710
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
Shock-Wave Compression of Quartz
Wackerle, J. D. (1962) · Journal of Applied Physics · doi:10.1063/1.1777192 · Cited by 698
Stable high efficiency two-dimensional perovskite solar cells via cesium doping
Zhang, X., Ren, X., Liu, B., Munir, R., Zhu, X., Yang, D., Li, J., Liu, Y., Smilgies, D.-M., Li, R., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01145h · Cited by 678
Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth
Jang, Y.-W., Lee, S., Yeom, K. M., Jeong, K., Choi, K., Choi, M., & Noh, J. H. (2021) · Nature Energy · doi:10.1038/s41560-020-00749-7 · Cited by 605
Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures
Lin, Y., Bai, Y., Fang, Y., Chen, Z., Yang, S., Zheng, X., Tang, S., Liu, Y., Zhao, J., & Huang, J. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02679 · Cited by 554
Soe, C. M. M., Stoumpos, C. C., Kepenekian, M., Traoré, B., Tsai, H., Nie, W., Wang, B., Katan, C., Seshadri, R., Mohite, A. D., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09096 · Cited by 521
Solar cell efficiency tables (Version 58)
Green, M. A., Dunlop, E. D., Hohl‐Ebinger, J., Yoshita, M., Kopidakis, N., & Hao, X. (2021) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3444 · Cited by 503
Kang, D., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201805214 · Cited by 498
Self-citationMultifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells
Cai, Y., Cui, J., Chen, M., Zhang, M., Han, Y., Qian, F., Zhao, H., Yang, S., Yang, Z., Bian, H., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005776 · Cited by 417
Zhao, T., Chueh, C.-C., Chen, Q., Rajagopal, A., & Jen, A. K.-Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00327 · Cited by 383
Kim, H., Lee, S., Lee, D. Y., Paik, M. J., Na, H., Lee, J., & Seok, S. I. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902740 · Cited by 346
Phase Pure 2D Perovskite for High‐Performance 2D–3D Heterostructured Perovskite Solar Cells
Li, P., Zhang, Y., Liang, C., Xing, G., Liu, X., Li, F., Liu, X., Hu, X., Shao, G., & Song, Y. (2018) · Advanced Materials · doi:10.1002/adma.201805323 · Cited by 339
Self-citationNiu, T., Zhu, W., Zhang, Y., Xue, Q., Jiao, X., Wang, Z., Xie, Y.-M., Li, P., Chen, R., Huang, F., et al. (2021) · Joule · doi:10.1016/j.joule.2020.12.003 · Cited by 320
Self-citationThiophene-Based Two-Dimensional Dion–Jacobson Perovskite Solar Cells with over 15% Efficiency
Lu, D., Lv, G., Xu, Z., Dong, Y., Ji, X., & Liu, Y. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c03363 · Cited by 278
Highly Efficient and Stable Solar Cells Based on Crystalline Oriented 2D/3D Hybrid Perovskite
Zhou, T., Lai, H., Liu, T., Lu, D., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901242 · Cited by 272
The Interplay between Trap Density and Hysteresis in Planar Heterojunction Perovskite Solar Cells
Lee, J.-W., Kim, S.-G., Bae, S.-H., Lee, D.-K., Lin, O., Yang, Y., & Park, N.-G. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01211 · Cited by 259
Self-citationSurface Reconstruction of Halide Perovskites During Post-treatment
Tan, S., Huang, T., Yavuz, I., Wang, R., Weber, M. H., Zhao, Y., Abdelsamie, M., Liao, M. E., Wang, H.-C., Huynh, K., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c00757 · Cited by 240
Zhang, Y., Wang, P., Tang, M.-C., Barrit, D., Ke, W., Liu, J., Luo, T., Liu, Y., Niu, T., Smilgies, D.-M., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13104 · Cited by 231
Self-citationLai, H., Lu, D., Xu, Z., Zheng, N., Xie, Z., & Liu, Y. (2020) · Advanced Materials · doi:10.1002/adma.202001470 · Cited by 227
Interfacial Engineering at the 2D/3D Heterojunction for High-Performance Perovskite Solar Cells
Niu, T., Lü, J., Jia, X., Xu, Z., Tang, M., Barrit, D., Yuan, N., Ding, J., Zhang, X., Fan, Y., et al. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b02781 · Cited by 225
Self-citationRajkumar, T., & Rao, G. R. (2008) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2008.06.046 · Cited by 189
Li, G., Song, J., Wu, J., Song, Z., Wang, X., Sun, W., Fan, L., Lin, J., Huang, M., Lan, Z., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c01649 · Cited by 180
Kim, S., Le, T. H., de Monfreid, T., Goubard, F., Bui, T., & Park, N. (2021) · Advanced Materials · doi:10.1002/adma.202007431 · Cited by 122
Self-citationDong, H., Xi, J., Zuo, L., Li, J., Yang, Y., Wang, D., Yu, Y., Ma, L., Ran, C., Gao, W., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808119 · Cited by 121
Efficient surface passivation of perovskite films by a post-treatment method with a minimal dose
Kang, D., Kim, S., Lee, J., & Park, N. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta10581c · Cited by 103
Self-citationStable and Reproducible 2D/3D Formamidinium–Lead–Iodide Perovskite Solar Cells
Thote, A., Jeon, I., Lee, J., Seo, S., Lin, H., Yang, Y., Daiguji, H., Maruyama, S., & Matsuo, Y. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b01964 · Cited by 96
Gu, H., Liang, C., Xia, Y., Wei, Q., Liu, T., Yang, Y., Hui, W., Chen, H., Niu, T., Chao, L., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104050 · Cited by 67
Zhao, H., Yang, S., Han, Y., Yuan, S., Jiang, H. L., Duan, C., Liu, Z., & Liu, S. F. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900311 · Cited by 65
Kalantzopoulos, G. N., Lundvall, F., Checchia, S., Lind, A. M., Wragg, D. S., Fjellvåg, H., & Arstad, B. (2017) · ChemPhysChem · doi:10.1002/cphc.201700973 · Cited by 62
Phenethylammonium Functionalization Enhances Near-Surface Carrier Diffusion in Hybrid Perovskites
Wang, T., Fu, Y., Jin, L., Deng, S., Pan, D., Dong, L., Jin, S., & Huang, L. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c04377 · Cited by 58
Zhang, Y., Wen, J., Xu, Z., Liu, D., Yang, T., Niu, T., Luo, T., Lü, J., Fang, J., Chang, X., et al. (2021) · Advanced Science · doi:10.1002/advs.202001433 · Cited by 45
Self-citation
Cited by
Wang, M., Shi, Z., Fei, C., Deng, Z. J. D., Yang, G., Dunfield, S. P., Fenning, D. P., & Huang, J. (2023) · Nature Energy · doi:10.1038/s41560-023-01362-0 · Cited by 253
Assessing the Drawbacks and Benefits of Ion Migration in Lead Halide Perovskites
Sakhatskyi, K., John, R. A., Guerrero, A., Tsarev, S., Sabisch, S., Das, T., Matt, G. J., Yakunin, S., Cherniukh, I., Kotyrba, M., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c01663 · Cited by 197
Metadata
- Authors
- Zhang, Y., & Park, N.-G.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-01-21
- Volume
- 7
- Issue
- 2
- Pages
- 757-765
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W4205165967
- Cited by
- 240
- References
- 44
- FWCI
- 14.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.