The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Achieving Reproducible and High-Efficiency (>21%) Perovskite Solar Cells with a Presynthesized FAPbI3 Powder
Abstract
The conventional precursor mixture based on highly pure and expensive PbI 2 (purity >99.99%) is problematic in commercializing perovskite solar cells (PSCs) because of a large deviation in the batch-to-batch photovoltaic performance due to underlying nonstoichiometry and/or the nonperovskite phase. Here, we report on reproducibly efficient (>21%) PSCs based on the ambient-temperature-stable δ-phase FAPbI 3 powder, synthesized by reacting PbI 2 (either homemade or low-grade commercial product with purity <99%) with formamidinium iodide (FAI) at room temperature (∼93% yield). X-ray diffraction patterns confirm that annealing the spin-coated film leads to phase purity of cubic α FAPbI 3 . As compared to the conventional precursor mixture based on PbI 2 (purity = 99.9985%), significantly reducing defects in the powder-based film is responsible for the stable and reproducible efficiency. In addition, the homogeneous light-intensity-dependent surface photocurrent contributes to the reproducibility of photovoltaic performance. The quasi-steady-state power conversion efficiency of 21.07% is certified for the device based on FAPbI 3 powder.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationEfficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Cited by
Conformal quantum dot–SnO 2 layers as electron transporters for efficient perovskite solar cells
Kim, M., Jeong, J., Lu, H., Lee, T. K., Eickemeyer, F. T., Liu, Y., Choi, I. W., Choi, S. J., Jo, Y., Kim, H.-B., et al. (2022) · Science · doi:10.1126/science.abh1885 · Cited by 1,346
Self-citationHomogenizing out-of-plane cation composition in perovskite solar cells
Liang, Z., Zhang, Y., Xu, H., Chen, W., Liu, B., Zhang, J., Zhang, H., Wang, Z., Kang, D.-H., Zeng, J., et al. (2023) · Nature · doi:10.1038/s41586-023-06784-0 · Cited by 791
Self-citationJacobsson, T. J., Hultqvist, A., García-Fernández, A., Anand, A., Al-Ashouri, A., Hagfeldt, A., Crovetto, A., Abate, A., Ricciardulli, A. G., Vijayan, A., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00941-3 · Cited by 372
Stabilization of Black Perovskite Phase in FAPbI3 and CsPbI3
Masi, S., Gualdrón-Reyes, A. F., & Mora-Seró, I. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00801 · Cited by 347
Mohd Yusoff, A. R. B., Vasilopoulou, M., Georgiadou, D. G., Palilis, L. C., Abate, A., & Nazeeruddin, M. K. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00062d · Cited by 327
Metadata
- Authors
- Zhang, Y., Seo, S., Lim, S. Y., Kim, Y., Kim, S.-G., Lee, D.-K., Lee, S.-H., Shin, H., Cheong, H., & Park, N.-G.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-12-09
- Volume
- 5
- Issue
- 2
- Pages
- 360-366
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2994707272
- Cited by
- 193
- References
- 2
- FWCI
- 9.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Achieving Reproducible and High-Efficiency (>21%) Perovskite Solar Cells with a Presynthesized FAPbI3 Powder. https://app.cochat.ai/papers/10.1021/acsenergylett.9b02348
- The paper
- Zhang, Y., Seo, S., Lim, S. Y., Kim, Y., Kim, S.-G., Lee, D.-K., Lee, S.-H., Shin, H., Cheong, H., & Park, N.-G. (2020). Achieving Reproducible and High-Efficiency (>21%) Perovskite Solar Cells with a Presynthesized FAPbI3 Powder. ACS Energy Letters. https://doi.org/10.1021/acsenergylett.9b02348
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.