CoChat

Estimating Power Plant Contributions to Surface Pollution in a Wintertime Arctic Environment

Open access

The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index; 30 of the 67 sources its claims cite were checked for support.

Abstract

High Resolution Image Download MS PowerPoint Slide Arctic winter meteorology and orography in the Fairbanks North Star Borough (FNSB, interior Alaska) promote stably stratified boundary layers, often causing acute pollution episodes that exceed the US-EPA National Ambient Air Quality Standards. Power plant emission contributions to breathing level (0–10 m) pollution are estimated over the FNSB using high-resolution Lagrangian tracer simulations run with temporally varying emissions and power plant plume rise accounting for atmospheric boundary layer stability and validated against comprehensive ALPACA-2022 observations. Average relative power plant contributions of 5–23% and 4–28% are diagnosed for SO 2 and NO x, respectively, with lower relative contributions in polluted conditions due to larger surface emissions. Highest population-weighted contributions are found in central and eastern (residential) areas of Fairbanks. Significant temporal variability in power plant contributions is revealed, depending on power plant operations and Arctic boundary layer stability. Vertical transport of power plant tracers to the surface depends on the interplay between the presence of temperature inversion layers and power plant stack heights as well as prevailing large-scale or local winds. Notably, power plant emissions can be transported to the surface even under strongly stable conditions, especially from shorter stacks, whereas down mixing from tall stacks mainly occurs under weakly stable conditions.

Overview

CoChat Summary

TL;DR

High-resolution FLEXPART-WRF tracer simulations with temporally varying emissions and inversion-aware plume rise estimate power plant contributions to 0–10 m pollution in Fairbanks during ALPACA-2022. Power plants contribute 5–23% of SO2 and 4–28% of NOx on average, with short stacks and stable conditions still able to reach breathing level.

Key findings

  • Average relative power plant contributions are 5–23% for SO2 and 4–28% for NOx; absolute contributions range from 0.3–2.7 ppb δSO2 and 0.6–6.4 ppb δNOx. In polluted conditions, absolute contributions are higher (0–3.3 ppb SO2, 0.2–9.1 ppb NOx) but relative contributions are lower (0–16% SO2, 1–14% NOx).
  • Downtown and East Residential are most affected, with contributions about a factor of 2 higher than other areas. Downtown averages 1.9 ppb (min–max: 0.8–2.7) δSO2 and 11% (8–16%) relative SO2; polluted Downtown averages 2.2 ppb (0.5–3.3) and 9% (3–16%). Downtown δNOx averages 4.4 ppb (1.3–6.4) with 7% (4–10%) relative contribution.
  • Short stacks (<30 m) contribute more under strongly stable (SS) conditions, while tall stacks (>30 m) contribute mainly under weakly stable (WS) conditions. Short-stack ranges are 0.0–3.2 ppb δSO2 and 0–5.1 ppb δNOx; tall-stack ranges are 0.0–0.6 ppb δSO2 and 0.0–2.9 ppb δNOx under WS, and 0.0–0.3 ppb δSO2 and 0.0–1.9 ppb δNOx under SS.
  • Estimated primary PM2.5 from power plants in Downtown is 0.1–1.1 μg m–3 daily during polluted conditions (average 0.5 μg m–3), with maximum hourly contributions up to 6.3 μg m–3; relative primary PM2.5 contributions are 0.6–6.2% (3.1% on average).

Methods

  • FLEXPART-WRF particle dispersion simulations driven by EPA-WRF for ALPACA-2022 (January–February 2022), using ADEC hourly near-surface emissions and point-source emissions from 8 power plant stacks (5 facilities), validated against surface and vertical profile observations from the companion Brett et al. study.
  • Breathing-level (0–10 m) power plant enhancements (δSO2, δNOx) above background are analyzed as absolute and relative contributions to total surface-plus-power-plant tracer, with population-weighted contributions using 4 km census data mapped to the 1.33 km grid. Sensitivity runs include plume capping on/off, minimum mixing height hmin = 10, 20, and 100 m, and ±50% power plant emissions.
  • Stability regimes (SS/WS) are based on surface temperature inversions; polluted conditions are defined as daily PM2.5 >15 μg m–3 at the Downtown NCore site. Primary PM2.5 is estimated by multiplying modeled δSO2 by stack-specific PM2.5:SO2 emission ratios.

Limitations

  • Stated: primary PM2.5 estimates are a lower limit because secondary aerosol production is not included; aerosol chemical composition of plumes aloft is not available; regional models may not capture plumes as well as FLEXPART-WRF due to excessive diffusion; current emission inventories do not include temporal variations in power plant emissions.
  • Stated: model results depend on the companion Brett et al. validation and sensitivity choices, and uncertainties in dispersion modeling of unique Arctic wintertime conditions are addressed through sensitivity simulations but not fully eliminated.
  • Evident from the text: the analysis relies on modeled tracer enhancements and emission ratios rather than direct source apportionment, and observational support for surface contributions is indirect (wind LiDAR, δCO2, Helikite profiles) without direct chemical fingerprinting of power plant PM at breathing level.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsestair.5c00030

Cites

39 of 39 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Hourly averaged surface (gray) and power plant emissions (colors) emitted in the FNSB area (kg hour–1) each day for (a) SO2 and (b) NOx according to the ADEC emissions inventory and the emissions from power plants during the ALPACA-2022 campaign. The black stars indicate weekend days on panels a and b. (c) ADEC emission sector contributions (kg hour–1) for the total surface emissions for NOx (left bars) and SO2 (right bars). (d) Left axis: observed hourly PM2.5 (μg m–3) at the NCore measurement site (Downtown, black line). The ‘polluted’ conditions, used in Section 3, for PM2.5 are shown by the thick red lines above. Right axis: observed hourly SO2 (parts per billion, ppb) at the CTC measurement site, colored by SS (green) and WS (orange) stability regimes as defined in Brett et al.34
Figure 1 Hourly averaged surface (gray) and power plant emissions (colors) emitted in the FNSB area (kg hour–1) each day for (a) SO2 and (b) NOx according to the ADEC emissions inventory and the emissions from power plants during the ALPACA-2022 campaign. The black stars indicate weekend days on panels a and b. (c) ADEC emission sector contributions (kg hour–1) for the total surface emissions for NOx (left bars) and SO2 (right bars). (d) Left axis: observed hourly PM2.5 (μg m–3) at the NCore measurement site (Downtown, black line). The ‘polluted’ conditions, used in Section 3, for PM2.5 are shown by the thick red lines above. Right axis: observed hourly SO2 (parts per billion, ppb) at the CTC measurement site, colored by SS (green) and WS (orange) stability regimes as defined in Brett et al.34CC BY · PubMed Central
Figure 2 Map of Fairbanks and North Pole. Solid and dashed lines indicate the FNSB and Fairbanks EPA nonattainment areas, respectively.36 The power plant locations (white triangles) correspond to the following power plants: (a) Aurora, (b) Zehnder, (c) University Alaska Fairbanks (UAF), (d) Doyon (Fort Wainwright), (e) North Pole. Grid cells (1.33 km resolution) with available population counts are shown. Analysis areas are depicted with the white borders (see text for details). OpenStreetMap contributors 2024. Distributed under the Open Data Commons Open Database License (ODbL) v1.0.
Figure 2 Map of Fairbanks and North Pole. Solid and dashed lines indicate the FNSB and Fairbanks EPA nonattainment areas, respectively.36 The power plant locations (white triangles) correspond to the following power plants: (a) Aurora, (b) Zehnder, (c) University Alaska Fairbanks (UAF), (d) Doyon (Fort Wainwright), (e) North Pole. Grid cells (1.33 km resolution) with available population counts are shown. Analysis areas are depicted with the white borders (see text for details). OpenStreetMap contributors 2024. Distributed under the Open Data Commons Open Database License (ODbL) v1.0.CC BY · PubMed Central
Figure 3 (a) Total δSO2 (ppb) power plant enhancements (ppb) at 0–10 m (campaign average). (b) Total SO2 power plant population-weighted contributions (PWCs), see Section S1.3 for details. The measurement sites are indicated by the colored diamonds and power plants shown by the white triangles, as in Figure 2.
Figure 3 (a) Total δSO2 (ppb) power plant enhancements (ppb) at 0–10 m (campaign average). (b) Total SO2 power plant population-weighted contributions (PWCs), see Section S1.3 for details. The measurement sites are indicated by the colored diamonds and power plants shown by the white triangles, as in Figure 2.CC BY · PubMed Central
Figure 4 Total power plant δSO2 (ppb) enhancements (black lines) between 0 and 10 m as a function of time (Alaskan Standard Time, AKST), colored by the different power plant contributions, indicated in the legend. Panels (a) to (f) correspond to the different analysis areas, indicated in Figure 2. The gray shaded periods correspond to SS conditions, and the nonshaded periods correspond to WS conditions. See text for details.
Figure 4 Total power plant δSO2 (ppb) enhancements (black lines) between 0 and 10 m as a function of time (Alaskan Standard Time, AKST), colored by the different power plant contributions, indicated in the legend. Panels (a) to (f) correspond to the different analysis areas, indicated in Figure 2. The gray shaded periods correspond to SS conditions, and the nonshaded periods correspond to WS conditions. See text for details.CC BY · PubMed Central
Figure 5 Cases illustrating downward power plant plume transport on (a) 23 January and (b) 30 to 31 January at the CTC site (situated Downtown, see Figure 2), showing (i) log(RCS) of wind LiDAR data as a function of altitude (40–290 m) and time, indicating power plant plumes aloft, (ii) total simulated power plant δSO2 (ppb) as a function of altitude (0–290 m) and time (Downtown area), and (iii) total simulated power plant (PP) δSO2 (ppb) at 0–10 m (Downtown area), for the stacks indicated (total = black line). The red dotted line corresponds to the 3–23 m δCO2 (parts per million, ppm) observed at CTC, see text for details.
Figure 5 Cases illustrating downward power plant plume transport on (a) 23 January and (b) 30 to 31 January at the CTC site (situated Downtown, see Figure 2), showing (i) log(RCS) of wind LiDAR data as a function of altitude (40–290 m) and time, indicating power plant plumes aloft, (ii) total simulated power plant δSO2 (ppb) as a function of altitude (0–290 m) and time (Downtown area), and (iii) total simulated power plant (PP) δSO2 (ppb) at 0–10 m (Downtown area), for the stacks indicated (total = black line). The red dotted line corresponds to the 3–23 m δCO2 (parts per million, ppm) observed at CTC, see text for details.CC BY · PubMed Central
Figure 6 Hourly absolute power plant contributions (ppb) at breathing level for SS vs WS regimes averaged over each area for tall power plant stack heights (>30 m, left panels) and short power plant stack heights (<30 m, right panels) for (a) δSO2 and (b) δNOx. Box lower edge = 25th percentile, upper edge = 75th percentile, and middle line = 50th percentile (median). Lower whisker = lowest data point within 25th percentile minus the interquartile range (IQR) × 2, and upper whisker = 75th percentile plus IQR × 2. Scatter points are outliers.
Figure 6 Hourly absolute power plant contributions (ppb) at breathing level for SS vs WS regimes averaged over each area for tall power plant stack heights (>30 m, left panels) and short power plant stack heights (<30 m, right panels) for (a) δSO2 and (b) δNOx. Box lower edge = 25th percentile, upper edge = 75th percentile, and middle line = 50th percentile (median). Lower whisker = lowest data point within 25th percentile minus the interquartile range (IQR) × 2, and upper whisker = 75th percentile plus IQR × 2. Scatter points are outliers.CC BY · PubMed Central
Figure 7 (a) δSO2 power plant concentrations (ppb) between 0 and 10 m for data when power plant concentrations >0.1 ppb. (b) δSO2 power plant contributions relative to the total δSO2 tracer (surface + power plant) in %. (c) SO2 population-weighted contributions (PWC) (see Section S1.3). Average values over the campaign (solid lines) and during ‘polluted periods’ (dashed lines) are shown. Results are shown for each area defined in Figure 2, and minimum and maximum values correspond to sensitivity simulations, see text for details regarding the upper and lower limits of the bars.
Figure 7 (a) δSO2 power plant concentrations (ppb) between 0 and 10 m for data when power plant concentrations >0.1 ppb. (b) δSO2 power plant contributions relative to the total δSO2 tracer (surface + power plant) in %. (c) SO2 population-weighted contributions (PWC) (see Section S1.3). Average values over the campaign (solid lines) and during ‘polluted periods’ (dashed lines) are shown. Results are shown for each area defined in Figure 2, and minimum and maximum values correspond to sensitivity simulations, see text for details regarding the upper and lower limits of the bars.CC BY · PubMed Central

Verification

Claims the paper makes

24 Valid · 7 Not valid · 24 Not checked · 113 Own results and interpretations

88 more claims · 4 with their cited sources checked

Create a free account to see all 168 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 49
  • Probably not a substantial claim. 34
  • The quote only partly states this claim. 2

Create a free account to see these claims.

Citations

Cites

Show all 39 references

Research works printed but not linked: 1

  1. Gilliam, R.; Fahey, K.; Pouliot, G.; Pye, H.; Briggs, N.; Farrell, S.; Huff, D.; Simpson, W.; Cesler-Maloney, M. M. Modeling wintertime meteorology for the 2022 Alaskan Layered Pollution and Chemical Analysis (ALPACA) campaign - AMS 2023. In 103rd American Meteorological Society Conference and 25th Conference on Atmospheric Chemistry, Denver, CO, 2023.

Cited by

See all 9

Metadata

Authors
Brett, N., Arnold, S. R., Law, K. S., Raut, J.-C., Onishi, T., Barret, B., Dieudonné, E., Cesler-Maloney, M., Simpson, W., Bekki, S., Savarino, J., Albertin, S., Gilliam, R., Fahey, K., Pouliot, G., Huff, D., & D’Anna, B.
Affiliations
  • Centre National de la Recherche Scientifique (FR)
  • University of Leeds (GB)
  • Université du littoral côte d'opale (FR)
  • Geophysical Institute and Department of Chemistry and Biochemistry
  • University of Alaska Fairbanks (US)
  • Univ. Grenoble Alpes, CNRS, IRD, INRAE, Grenoble INP, IGE
  • Institut polytechnique de Grenoble (FR)
  • Environmental Protection Agency (US)
  • Alaska Department of Environmental Conservation (US)
Corresponding author
Brett, Natalie
Venue
ACS ES&T Air
Published
2025-04-21
Volume
2
Issue
5
Pages
943-956
ISSN
2837-1402 (ISSN-L)
OpenAlex
W4409626199
Cited by
9
References
39
Citations by year
2026: 8 · 2025: 1
FWCI
3.00
Type
journal article
Language
en
Open access
Locations
  • ACS ES&T Air (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • HAL (submittedVersion, cc-by)
  • White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (submittedVersion)
Funders
  • Agence Nationale de la Recherche (ANR-21-CE01-0017)
  • Institut national des sciences de l'Univers
  • National Centre for Earth Observation (NE/W00609X/1)
  • Division of Atmospheric and Geospace Sciences (AGS-2109134)
  • Institut Polaire Fran?ais Paul Emile Victor (1215)
  • National Science Foundation (NNA-1927750)
Topics
  • Physical Sciences › Earth and Planetary Sciences › Atmospheric Science › Atmospheric chemistry and aerosols
  • Physical Sciences › Environmental Science › Environmental Engineering › Wind and Air Flow Studies
  • Physical Sciences › Environmental Science › Environmental Engineering › Air Quality Monitoring and Forecasting
Keywords
power plant emissions, Arctic air pollution, stable boundary layer, SO2, NOx, plume rise, temperature inversion, emission source apportionment

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-05, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-05 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Estimating Power Plant Contributions to Surface Pollution in a Wintertime Arctic Environment. https://app.cochat.ai/papers/10.1021/acsestair.5c00030
The paper
Brett, N., Arnold, S. R., Law, K. S., Raut, J.-C., Onishi, T., Barret, B., Dieudonné, E., Cesler-Maloney, M., Simpson, W., Bekki, S., Savarino, J., Albertin, S., Gilliam, R., Fahey, K., Pouliot, G., Huff, D., & D’Anna, B. (2025). Estimating Power Plant Contributions to Surface Pollution in a Wintertime Arctic Environment. ACS ES&T Air. https://doi.org/10.1021/acsestair.5c00030

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.