Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.

Investigating processes influencing simulation of local Arctic wintertime anthropogenic pollution in Fairbanks, Alaska, during ALPACA-2022

Open access

Published version of a preprint

Abstract

Lagrangian tracer simulations are deployed to investigate processes influencing vertical and horizontal dispersion of anthropogenic pollution in Fairbanks, Alaska, during the Alaskan Layered Pollution and Chemical Analysis (ALPACA) 2022 field campaign. Simulated concentrations of carbon monoxide (CO), sulfur dioxide (SO 2 ), and nitrogen oxides (NO x ), including surface and elevated sources, are the highest at the surface under very cold stable conditions. Pollution enhancements above the surface (50–300 m) are mainly attributed to elevated power plant emissions. Both surface and elevated sources contribute to Fairbanks' regional pollution that is transported downwind, primarily to the south-west, and may contribute to wintertime Arctic haze. Inclusion of a novel power plant plume rise treatment that considers the presence of surface and elevated temperature inversion layers leads to improved agreement with observed CO and NO x plumes, with discrepancies attributed to, for example, displacement of plumes by modelled winds. At the surface, model results show that observed CO variability is largely driven by meteorology and, to a lesser extent, by emissions, although simulated tracers are sensitive to modelled vertical dispersion. Modelled underestimation of surface NO x during very cold polluted conditions is considerably improved following the inclusion of substantial increases in diesel vehicle NO x emissions at cold temperatures (e.g. a factor of 6 at −30 °C). In contrast, overestimation of surface SO 2 is attributed mainly to model deficiencies in vertical dispersion of elevated (5–18 m) space heating emissions. This study highlights the need for improvements to local wintertime Arctic anthropogenic surface and elevated emissions and improved simulation of Arctic stable boundary layers.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.5194/acp-25-1063-2025

Cites

67 of 67 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure A1. CO, SO2, NO, and NO2 emissions averaged over the campaign, summed between 0–18 m altitude in (ai) the Fairbanks non-attainment area, with a sum of 129 grid cells (1.33 × 133 km2) (kg h−1). In panels (aii) and (b–e), the emissions are averaged per grid cell (kg h−1 km−2) for (aii) the Fairbanks non-attainment area, (b) the North Pole non-attainment area, (c) the Downtown area, (d) Hamilton Acres, and (e) the UAF Farm. Panels (c) to (e) are for the ADEC emissions grid cell closest to the location. See Fig. 1 for details.
Figure A1. CO, SO2, NO, and NO2 emissions averaged over the campaign, summed between 0–18 m altitude in (ai) the Fairbanks non-attainment area, with a sum of 129 grid cells (1.33 × 133 km2) (kg h−1). In panels (aii) and (b–e), the emissions are averaged per grid cell (kg h−1 km−2) for (aii) the Fairbanks non-attainment area, (b) the North Pole non-attainment area, (c) the Downtown area, (d) Hamilton Acres, and (e) the UAF Farm. Panels (c) to (e) are for the ADEC emissions grid cell closest to the location. See Fig. 1 for details.CC BY · PubMed Central
Figure A2. Emissions of (a) CO, (b) SO2, (c) NO, and (d) NO2 (kg) for each power plant stack (indicated above panel a) as a function of time during ALPACA-2022. Averages of 3h are shown for clarification of the data points, but 1h data are used in the modelling study.
Figure A2. Emissions of (a) CO, (b) SO2, (c) NO, and (d) NO2 (kg) for each power plant stack (indicated above panel a) as a function of time during ALPACA-2022. Averages of 3h are shown for clarification of the data points, but 1h data are used in the modelling study.CC BY · PubMed Central
Figure B1. Time series of surface and near-surface temperatures (°C), temperature gradients (dT, °C), wind speeds (m s−1), and directions (°) Downtown compared to EPA-WRF (red) for available observations (black) up to 23 m altitude during ALPACA-2022.
Figure B1. Time series of surface and near-surface temperatures (°C), temperature gradients (dT, °C), wind speeds (m s−1), and directions (°) Downtown compared to EPA-WRF (red) for available observations (black) up to 23 m altitude during ALPACA-2022.CC BY · PubMed Central
Figure B2. Time series of surface and near-surface temperatures (°C), temperature gradients (dT, °C), wind speeds (m s−1), and directions (°) at the UAF Farm compared to EPA-WRF (red) for available observations (black) up to 11 m altitude during ALPACA-2022.
Figure B2. Time series of surface and near-surface temperatures (°C), temperature gradients (dT, °C), wind speeds (m s−1), and directions (°) at the UAF Farm compared to EPA-WRF (red) for available observations (black) up to 11 m altitude during ALPACA-2022.CC BY · PubMed Central
Figure C1. Spatial maps of total power plants and surface-emitted tracer enhancements (CTRL simulation) for (i) SS and (ii) WS conditions for (a) SO2 (ppb) at 100–200 m, (b) CO at 50–100 m, and (c) CO at 100–200 and 200–300 m (iii, iv). Wind vectors (black arrows) indicate average wind direction (°) and wind speeds (m s−1) simulated by EPA-WRF.
Figure C1. Spatial maps of total power plants and surface-emitted tracer enhancements (CTRL simulation) for (i) SS and (ii) WS conditions for (a) SO2 (ppb) at 100–200 m, (b) CO at 50–100 m, and (c) CO at 100–200 and 200–300 m (iii, iv). Wind vectors (black arrows) indicate average wind direction (°) and wind speeds (m s−1) simulated by EPA-WRF.CC BY · PubMed Central
Figure C2. Spatial maps of total power plants and surface-emitted tracer enhancements (CTRL simulation) for (i) SS and (ii) WS conditions for CO (ppb) at (a) 0–10 m (top), 50–100 m (lower), and (b) 100–200 m (top) and 200–300 m (lower). Wind vectors (black arrows) indicate average wind direction (°) and wind speeds (m s−1) simulated by EPA-WRF.
Figure C2. Spatial maps of total power plants and surface-emitted tracer enhancements (CTRL simulation) for (i) SS and (ii) WS conditions for CO (ppb) at (a) 0–10 m (top), 50–100 m (lower), and (b) 100–200 m (top) and 200–300 m (lower). Wind vectors (black arrows) indicate average wind direction (°) and wind speeds (m s−1) simulated by EPA-WRF.CC BY · PubMed Central
Figure C3. (a) Total power plants (i) and surface-emitted (ii) tracer enhancements (CTRL simulation) as a function of altitude and time for (a) SO2 (ppb) at Hamilton Acres and (b) CO (ppb) at the UAF Farm. The WS and SS stability regimes are indicated every 12 h.
Figure C3. (a) Total power plants (i) and surface-emitted (ii) tracer enhancements (CTRL simulation) as a function of altitude and time for (a) SO2 (ppb) at Hamilton Acres and (b) CO (ppb) at the UAF Farm. The WS and SS stability regimes are indicated every 12 h.CC BY · PubMed Central
Figure D1. Comparison of modelled power plant and observed trace gas enhancements above background (>30 m) for (a) NO-CAP and (b) NO-RISE and (i) δCO (ppb) and (ii) δNOx (ppb) at the closest grid cell to the UAF Farm. Periods with available observations are shown. Observed plume enhancements are shown as circles (ppb).
Figure D1. Comparison of modelled power plant and observed trace gas enhancements above background (>30 m) for (a) NO-CAP and (b) NO-RISE and (i) δCO (ppb) and (ii) δNOx (ppb) at the closest grid cell to the UAF Farm. Periods with available observations are shown. Observed plume enhancements are shown as circles (ppb).CC BY · PubMed Central
Figure D2. (a) Spatial distribution of power plant tracers for (i) CO (ppb) and (ii) NOx (ppb) between 150–200 m at 11:00 AKST on 25 February (case 3, Sect. 5), highlighting the Aurora plume displacement to the south of the UAF Farm. (b) Observed temperature profiles and modelled NOx tracer (ppb) enhancements against observations averaged over 30 m altitude bins for case 4 on 3–4 February (see Fig. 7 for details). (c) Spatial distribution of power plant NOx tracer (ppb) between 120–180 m at 02:00 AKST on 4 February, highlighting the Doyon plume displacement to the south of the UAF Farm.
Figure D2. (a) Spatial distribution of power plant tracers for (i) CO (ppb) and (ii) NOx (ppb) between 150–200 m at 11:00 AKST on 25 February (case 3, Sect. 5), highlighting the Aurora plume displacement to the south of the UAF Farm. (b) Observed temperature profiles and modelled NOx tracer (ppb) enhancements against observations averaged over 30 m altitude bins for case 4 on 3–4 February (see Fig. 7 for details). (c) Spatial distribution of power plant NOx tracer (ppb) between 120–180 m at 02:00 AKST on 4 February, highlighting the Doyon plume displacement to the south of the UAF Farm.CC BY · PubMed Central
Figure D3. (i, ii) Simulated power plant NOx tracers (ppb) as a function of altitude and time for the NO-CAP and CTRL simulations, respectively. (iii) Aerosol backscatter coefficient observed by wind lidar observations and (iv) lidar plume mask (described in Appendix D), for (a) 30 January to 1 February in the Downtown area (case 1, highlighted by the white box) and (b) 8 to 9 February at the UAF Farm (case 2, highlighted by the white box).
Figure D3. (i, ii) Simulated power plant NOx tracers (ppb) as a function of altitude and time for the NO-CAP and CTRL simulations, respectively. (iii) Aerosol backscatter coefficient observed by wind lidar observations and (iv) lidar plume mask (described in Appendix D), for (a) 30 January to 1 February in the Downtown area (case 1, highlighted by the white box) and (b) 8 to 9 February at the UAF Farm (case 2, highlighted by the white box).CC BY · PubMed Central
Figure E1. (a) Total modelled surface and power plant tracers as a function of time between 0–5 m for CTRL and selected sensitivity simulations described in Table 2 compared to available surface observations, at HA for (i) CO and (ii) NOx. (b) Average diurnal cycles at HA for observations (black) and model simulations (colours as in a) for (i) CO and (ii) NOx, averaged over all data and for events AC–C, T–C, Mixed, and T–W.
Figure E1. (a) Total modelled surface and power plant tracers as a function of time between 0–5 m for CTRL and selected sensitivity simulations described in Table 2 compared to available surface observations, at HA for (i) CO and (ii) NOx. (b) Average diurnal cycles at HA for observations (black) and model simulations (colours as in a) for (i) CO and (ii) NOx, averaged over all data and for events AC–C, T–C, Mixed, and T–W.CC BY · PubMed Central
Figure E2. (a) Total modelled surface and power plant tracers as a function of time between 0–5 m for CTRL and selected sensitivity simulations described in Table 2 compared to available surface observations, at the UAF Farm for CO. (b) Average diurnal cycles at the UAF Farm for observations (black) and model simulations (colours as in a) for CO averaged over all data and for events AC–C, T–C, Mixed, and T–W.
Figure E2. (a) Total modelled surface and power plant tracers as a function of time between 0–5 m for CTRL and selected sensitivity simulations described in Table 2 compared to available surface observations, at the UAF Farm for CO. (b) Average diurnal cycles at the UAF Farm for observations (black) and model simulations (colours as in a) for CO averaged over all data and for events AC–C, T–C, Mixed, and T–W.CC BY · PubMed Central
Figure E3. Increment applied to NOx mobile (on-road and off-road) emissions as a function of daily average temperature (°C) using a log-linear function.
Figure E3. Increment applied to NOx mobile (on-road and off-road) emissions as a function of daily average temperature (°C) using a log-linear function.CC BY · PubMed Central
Figure 1. Map of Fairbanks and North Pole. The solid and dashed lines indicate the Fairbanks and North Pole non-attainment areas (AQFairbanks, 2024). The power plant locations (yellow triangles) correspond to the following power plants: (a) Aurora, (b) Zehnder, (c) University of Alaska Fairbanks (UAF), (d) Doyon (Fort Wainwright), and (e) North Pole. Measurement sites at which trace gas measurements are available for model evaluation are indicated (see Sect. 2.3.1 for details). Two airports, Fairbanks International Airport (FAI) and Fort Wainwright (military base), are also indicated. The grid cells for surface-emitted emissions, 1.33 km apart, are shown as small grey crosses. © OpenStreetMap contributors 2024. Distributed under the Open Data Commons Open Database License (ODbL) v1.0.
Figure 1. Map of Fairbanks and North Pole. The solid and dashed lines indicate the Fairbanks and North Pole non-attainment areas (AQFairbanks, 2024). The power plant locations (yellow triangles) correspond to the following power plants: (a) Aurora, (b) Zehnder, (c) University of Alaska Fairbanks (UAF), (d) Doyon (Fort Wainwright), and (e) North Pole. Measurement sites at which trace gas measurements are available for model evaluation are indicated (see Sect. 2.3.1 for details). Two airports, Fairbanks International Airport (FAI) and Fort Wainwright (military base), are also indicated. The grid cells for surface-emitted emissions, 1.33 km apart, are shown as small grey crosses. © OpenStreetMap contributors 2024. Distributed under the Open Data Commons Open Database License (ODbL) v1.0.CC BY · PubMed Central
Figure 2. (a) Average power plant emissions (kgh−1) during ALPACA-2022 for CO, SO2, NO, and NO2. (b) Schematic illustrating the plume rise parameterisation used to simulate power plant injection altitudes. Examples of surface-based inversion (SBI), stratified SBI (SSBI), and elevated inversion (EI) layers are given and (i) correspond to a plume with no inversion capping, (ii) a plume which has been capped at an EI top, and (iii) a plume which has been capped at an SBI top.
Figure 2. (a) Average power plant emissions (kgh−1) during ALPACA-2022 for CO, SO2, NO, and NO2. (b) Schematic illustrating the plume rise parameterisation used to simulate power plant injection altitudes. Examples of surface-based inversion (SBI), stratified SBI (SSBI), and elevated inversion (EI) layers are given and (i) correspond to a plume with no inversion capping, (ii) a plume which has been capped at an EI top, and (iii) a plume which has been capped at an SBI top.CC BY · PubMed Central
Figure 3. Observations of (a) surface NOx mixing ratios (parts per billion, ppb), (b) wind speeds (23 m, ms−1) and surface pressure (hPa) at the UAF Farm, and (c) temperature inversions (dT23−3m, °C) at CTC during the ALPACA-2022 campaign (1h averages), coloured by strongly stable (SS) and weakly stable (WS) regimes. (d) SBI and SSBI top heights (m) derived from the FAI radiosondes (12-hourly) and (e) stability strengths, dT/dZ per 100 m (°C(100 m)−1) derived from 12-hourly radiosonde data over given altitude bins. The meteorological periods used in the analysis are also indicated in panels (a)–(d). See text for details.
Figure 3. Observations of (a) surface NOx mixing ratios (parts per billion, ppb), (b) wind speeds (23 m, ms−1) and surface pressure (hPa) at the UAF Farm, and (c) temperature inversions (dT23−3m, °C) at CTC during the ALPACA-2022 campaign (1h averages), coloured by strongly stable (SS) and weakly stable (WS) regimes. (d) SBI and SSBI top heights (m) derived from the FAI radiosondes (12-hourly) and (e) stability strengths, dT/dZ per 100 m (°C(100 m)−1) derived from 12-hourly radiosonde data over given altitude bins. The meteorological periods used in the analysis are also indicated in panels (a)–(d). See text for details.CC BY · PubMed Central
Figure 4. (a) Total power plant and surface-emitted tracers (enhancements above background in ppb) from CTRL for CO and SO2 at 0–10 m and (b) SO2 at 50–100 m (i, ii) and 200–300 m (iii, iv) for strongly stable (SS) (left) and weakly stable (WS) (right) meteorological conditions. Wind vectors (black arrows) indicating average wind direction (°) and speeds (m s−1) from EPA-WRF are shown and correspond to respective altitudes. The Fairbanks and North Pole non-attainment area borders are marked with black and white circles, power plants with white triangles, and analysis locations with coloured diamonds, as in Fig. 1.
Figure 4. (a) Total power plant and surface-emitted tracers (enhancements above background in ppb) from CTRL for CO and SO2 at 0–10 m and (b) SO2 at 50–100 m (i, ii) and 200–300 m (iii, iv) for strongly stable (SS) (left) and weakly stable (WS) (right) meteorological conditions. Wind vectors (black arrows) indicating average wind direction (°) and speeds (m s−1) from EPA-WRF are shown and correspond to respective altitudes. The Fairbanks and North Pole non-attainment area borders are marked with black and white circles, power plants with white triangles, and analysis locations with coloured diamonds, as in Fig. 1.CC BY · PubMed Central
Figure 5. (a) Modelled (CTRL) SO2 tracer (ppb) as a function of altitude (m) and local time (AKST, hours) for (i) total power plant emissions and (ii) total surface emissions (a) Downtown and (b) at the UAF Farm. The WS and SS surface stability regimes are indicated every 12 h by filled (solid) and unfilled (open) circles, respectively.
Figure 5. (a) Modelled (CTRL) SO2 tracer (ppb) as a function of altitude (m) and local time (AKST, hours) for (i) total power plant emissions and (ii) total surface emissions (a) Downtown and (b) at the UAF Farm. The WS and SS surface stability regimes are indicated every 12 h by filled (solid) and unfilled (open) circles, respectively.CC BY · PubMed Central
Figure 6. Comparison of modelled (CTRL) power plant and observed trace gas enhancements above background (>30 m) for (a) δCO (ppb) and (b) δNOx (ppb) at the closest grid cell to the UAF Farm. Observed plume enhancements are shown as circles (ppb). Cases discussed in the main text are highlighted.
Figure 6. Comparison of modelled (CTRL) power plant and observed trace gas enhancements above background (>30 m) for (a) δCO (ppb) and (b) δNOx (ppb) at the closest grid cell to the UAF Farm. Observed plume enhancements are shown as circles (ppb). Cases discussed in the main text are highlighted.CC BY · PubMed Central
Figure 7. (a) Temperature profiles (°C) recorded during the Helikite flight for the cases highlighted in (a) and (b). Coloured circles correspond to the time during the flight. Radiosonde temperature profiles (°C) used for the calculation of plume rise are also shown (solid black lines) and 12 h before or after the flight (dashed grey line). Derived temperature inversions (at temperature, °C; height, m) are indicated as red crosses. (b) Modelled (CTRL) power plant tracers compared to observations for CO and/or NOx (ppb) averaged over altitude bins every 30 m (indicated on the y axis) at the time of the Helikite flight. For panels (a) and (b), cases 1–3 are shown from the top to the bottom. See text for more details.
Figure 7. (a) Temperature profiles (°C) recorded during the Helikite flight for the cases highlighted in (a) and (b). Coloured circles correspond to the time during the flight. Radiosonde temperature profiles (°C) used for the calculation of plume rise are also shown (solid black lines) and 12 h before or after the flight (dashed grey line). Derived temperature inversions (at temperature, °C; height, m) are indicated as red crosses. (b) Modelled (CTRL) power plant tracers compared to observations for CO and/or NOx (ppb) averaged over altitude bins every 30 m (indicated on the y axis) at the time of the Helikite flight. For panels (a) and (b), cases 1–3 are shown from the top to the bottom. See text for more details.CC BY · PubMed Central
Figure 8. (a) Vertical cross section of total simulated (CTRL) power plant tracer over several hours before, during, and after each flight, with observations included as scatter points (as in Fig. 6). (b) Hourly percentage contributions from different power plant stacks throughout the vertical profile. (c) The altitude (m) where the 95th percentile of tracers resides, for each contributing power plant stack, as a function of time (hourly). For panels (a) to (c), cases 1–3 are shown from left to right. See text for more details.
Figure 8. (a) Vertical cross section of total simulated (CTRL) power plant tracer over several hours before, during, and after each flight, with observations included as scatter points (as in Fig. 6). (b) Hourly percentage contributions from different power plant stacks throughout the vertical profile. (c) The altitude (m) where the 95th percentile of tracers resides, for each contributing power plant stack, as a function of time (hourly). For panels (a) to (c), cases 1–3 are shown from left to right. See text for more details.CC BY · PubMed Central
Figure 9. (a) Total modelled surface and power plant tracers (in ppb) as a function of time between 0–5 m for CTRL and selected sensitivity simulations described in Table 2 compared to available surface observations Downtown for (i) CO, (ii) NOx, and (iii) SO2. (b) Diurnal cycles, Downtown, for observations (black) and model simulations (colours as in a), averaged over all data (left) and over events AC–C, T–C, Mixed, and T–W. CONST CO signifies the CONST-EM sensitivity run.
Figure 9. (a) Total modelled surface and power plant tracers (in ppb) as a function of time between 0–5 m for CTRL and selected sensitivity simulations described in Table 2 compared to available surface observations Downtown for (i) CO, (ii) NOx, and (iii) SO2. (b) Diurnal cycles, Downtown, for observations (black) and model simulations (colours as in a), averaged over all data (left) and over events AC–C, T–C, Mixed, and T–W. CONST CO signifies the CONST-EM sensitivity run.CC BY · PubMed Central
Figure 10. Estimated mixing ratios in ppb based on ADEC surface emission fluxes and a 10 m mixing depth, averaged over the Downtown area, compared to observed mixing ratios in ppb at the CTC site (black circles), averaged over 3°C temperature bins for (a) the full campaign, (b) 29 January to 2 February, and (c) 23 to 25 February for CO (left) and NOx (right). The shaded colours correspond to the contributing emission sectors indicated in the legend (total of all sectors – grey diamonds). The mid-point of the 3°C temperature bin is shown on the x axis. The increment in NOx vehicle emissions at low temperatures, according to the log-linear temperature dependence, is also shown with cyan shading and dotted hatching. See text for details.
Figure 10. Estimated mixing ratios in ppb based on ADEC surface emission fluxes and a 10 m mixing depth, averaged over the Downtown area, compared to observed mixing ratios in ppb at the CTC site (black circles), averaged over 3°C temperature bins for (a) the full campaign, (b) 29 January to 2 February, and (c) 23 to 25 February for CO (left) and NOx (right). The shaded colours correspond to the contributing emission sectors indicated in the legend (total of all sectors – grey diamonds). The mid-point of the 3°C temperature bin is shown on the x axis. The increment in NOx vehicle emissions at low temperatures, according to the log-linear temperature dependence, is also shown with cyan shading and dotted hatching. See text for details.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

18 more claims about this paper

Create a free account to see every claim other papers make about this one.

See all claims — free account

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 66 references

Research works printed but not linked: 4

  1. Fochesatto, G. J., Brett, N., Law, K. S., Pohorsky, R., Baccarini, A., Barret, B., Pappaccogli, G., Scoto, F., Busetto, M., Dieudonné, E., Albertin, S., Bekki, S., Maillard, J., Cesler-maloney, M., Raut, J.-C., Ravetta, F., Atkinson, D., Keller, D., Roberts, T. J., Schmale, J., Decesari, S., Donateo, A., Doulgeris, K., Brus, D., Arnold, S., Mao, J., and Simpson, W. R.: Overview of the ALPACA-PBL Winter Field Experiment, in: The 103rd AMS Annual Meeting, Denver, United States, January 2023, https://insu.hal.science/insu-04216320 (last access: 3 December 2024), 2023.
  2. Guevara, M., Jorba, O., Tena, C., Denier van der Gon, H., Kuenen, J., Elguindi, N., Darras, S., Granier, C., and Pérez García-Pando, C.: Copernicus Atmosphere Monitoring Service TEMPOral profiles (CAMS-TEMPO): global and European emission temporal profile maps for atmospheric chemistry modelling, Earth Syst. Sci. Data, 13, 367–404, 10.5194/essd-13-367-2021, 2021. · DOI · Paper page
  3. Pasquill, F. and Smith, F. B.: Atmospheric diffusion, vol. 437, E. Horwood New York, NY, USA, ISBN 10:0130513350, ISBN 13:9780130513359, 1983.
  4. Shaw, G. E.: The Arctic haze phenomenon, B. Am. Meteorol. Soc., 76, 2403–2414, 10.1175/1520-0477(1995)0762.0.CO;2, 1995. · doi:10.1175/1520-0477(1995)0762.0.co;2

Cited by

See all 15

Metadata

Authors
Brett, N., Law, K. S., Arnold, S. R., Fochesatto, J. G., Raut, J.-C., Onishi, T., Gilliam, R., Fahey, K., Huff, D., Pouliot, G., Barret, B., Dieudonné, E., Pohorsky, R., Schmale, J., Baccarini, A., Bekki, S., Pappaccogli, G., Scoto, F., Decesari, S., Donateo, A., Cesler-Maloney, M., Simpson, W., Medina, P., D'Anna, B., Temime-Roussel, B., Savarino, J., Albertin, S., Mao, J., Alexander, B., Moon, A., DeCarlo, P. F., Selimovic, V., Yokelson, R., & Robinson, E. S.
Affiliations
  • Centre National de la Recherche Scientifique (FR)
  • University of Leeds (GB)
  • Environmental Protection Agency (US)
  • Alaska Department of Environmental Conservation (US)
  • Université du littoral côte d'opale (FR)
  • École Polytechnique Fédérale de Lausanne (CH)
  • Institute of Atmospheric Sciences and Climate (IT)
  • University of Alaska Fairbanks (US)
  • Institut polytechnique de Grenoble (FR)
  • University of Washington (US)
  • Johns Hopkins University (US)
  • University of Michigan (US)
  • University of Montana (US)
Corresponding author
Brett, Natalie
Venue
Atmospheric Chemistry and Physics
Published
2025-01-28
Volume
25
Issue
2
Pages
1063-1104
ISSN
  • 1680-7316 (ISSN-L)
  • 1680-7324
OpenAlex
W4406882059
Cited by
15
References
66
Citations by year
2026: 4 · 2025: 9
FWCI
5.65
Type
journal article
Language
en
Open access
Locations
  • Atmospheric chemistry and physics (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • PubMed Central (publishedVersion, cc-by)
  • White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
  • HAL (submittedVersion, other-oa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
Funders
Natural Environment Research Council (NE/W00609X/1)
Topics
  • Physical Sciences › Earth and Planetary Sciences › Atmospheric Science › Atmospheric chemistry and aerosols
  • Physical Sciences › Environmental Science › Environmental Engineering › Wind and Air Flow Studies
  • Physical Sciences › Environmental Science › Environmental Engineering › Air Quality Monitoring and Forecasting
Keywords
Arctic haze, anthropogenic emissions, carbon monoxide, sulfur dioxide, nitrogen oxides, temperature inversion layer, stable boundary layer, diesel vehicle emissions, Fairbanks, Alaska, pollutant dispersion

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Investigating processes influencing simulation of local Arctic wintertime anthropogenic pollution in Fairbanks, Alaska, during ALPACA-2022. https://app.cochat.ai/papers/10.5194/acp-25-1063-2025
The paper
Brett, N., Law, K. S., Arnold, S. R., Fochesatto, J. G., Raut, J.-C., Onishi, T., Gilliam, R., Fahey, K., Huff, D., Pouliot, G., Barret, B., Dieudonné, E., Pohorsky, R., Schmale, J., Baccarini, A., Bekki, S., Pappaccogli, G., Scoto, F., Decesari, S., . . . Robinson, E. S. (2025). Investigating processes influencing simulation of local Arctic wintertime anthropogenic pollution in Fairbanks, Alaska, during ALPACA-2022. Atmospheric Chemistry and Physics. https://doi.org/10.5194/acp-25-1063-2025

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.