The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Highly Electroconductive and Mechanically Strong Ti3C2TxMXene Fibers Using a Deformable MXene Gel
Abstract
Abstract Self-assembly of two-dimensional MXene sheets is used in various fields to create multiscale structures due to their electrical, mechanical, and chemical properties. In principle, MXene nanosheets are assembled by molecular interactions, including hydrogen bonds, electrostatic interactions, and van der Waals forces. This study describes how MXene colloid nanosheets can form self-supporting MXene hydrogels. Three-dimensional network structures of MXene gels are strengthened by reinforced electrostatic interactions between nanosheets. Stable gel networks are beneficial for fabricating highly aligned fibers because MXene gel can endure structural deformation. During wet spinning of highly concentrated MXene colloids in a coagulation bath, MXene sheets can be transformed into perfectly aligned fibers under a mechanical drawing force. Oriented MXene fibers exhibit a 1.5-fold increase in electrical conductivity (12 504 S cm–1) and Young’s modulus (122 GPa) compared with other fibers. The oriented MXene fibers are expected to have widespread applications, including electrical wiring and signal transmission.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Two-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Recent Advances in Two-Dimensional Materials beyond Graphene
Bhimanapati, G. R., Lin, Z., Meunier, V., Jung, Y., Cha, J., Das, S., Xiao, D., Son, Y., Strano, M. S., Cooper, V. R., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b05556 · Cited by 2,659
Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335
Self‐Assembly in Natural and Unnatural Systems
Philp, D., & Stoddart, J. F. (1996) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199611541 · Cited by 2,115
Lipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751
Langmuir−Blodgett Assembly of Graphite Oxide Single Layers
Cote, L. J., Kim, F., & Huang, J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja806262m · Cited by 1,750
Yu, D., Goh, K., Wang, H., Wei, L., Jiang, W., Zhang, Q., Dai, L., & Chen, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.93 · Cited by 1,436
Two dimensional nanomaterials for flexible supercapacitors
Peng, X., Peng, L., Wu, C., & Xie, Y. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60407a · Cited by 1,115
Graphene chiral liquid crystals and macroscopic assembled fibres
Xu, Z., & Gao, C. (2011) · Nature Communications · doi:10.1038/ncomms1583 · Cited by 1,112
High-Performance Carbon Nanotube Fiber
Koziol, K., Vilatela, J., Moisala, A., Motta, M., Cunniff, P., Sennett, M., & Windle, A. (2007) · Science · doi:10.1126/science.1147635 · Cited by 1,038
Scalable Manufacturing of Free‐Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity
Zhang, J., Kong, N., Uzun, S., Levitt, A., Seyedin, S., Lynch, P. A., Qin, S., Han, M., Yang, W., Liu, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202001093 · Cited by 972
Fabrication of Ti3C2Tx MXene Transparent Thin Films with Tunable Optoelectronic Properties
Hantanasirisakul, K., Zhao, M., Urbankowski, P., Halim, J., Anasori, B., Kota, S., Ren, C. E., Barsoum, M. W., & Gogotsi, Y. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600050 · Cited by 838
Highly thermally conductive and mechanically strong graphene fibers
Xin, G., Yao, T., Sun, H., Scott, S. M., Shao, D., Wang, G., & Lian, J. (2015) · Science · doi:10.1126/science.aaa6502 · Cited by 740
Akbari, A., Sheath, P., Martin, S. T., Shinde, D. B., Shaibani, M., Banerjee, P. C., Tkacz, R., Bhattacharyya, D., & Majumder, M. (2016) · Nature Communications · doi:10.1038/ncomms10891 · Cited by 718
Ultrastrong Fibers Assembled from Giant Graphene Oxide Sheets
Xu, Z., Sun, H., Zhao, X., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201203448 · Cited by 699
All-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage
Peng, Y.-Y., Akuzum, B., Kurra, N., Zhao, M.-Q., Alhabeb, M., Anasori, B., Kumbur, E. C., Alshareef, H. N., Ger, M.-D., & Gogotsi, Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01717g · Cited by 697
Structure and Properties of Oriented Polymers
(1997) · Springer eBooks · doi:10.1007/978-94-011-5844-2 · Cited by 672
On the Gelation of Graphene Oxide
Bai, H., Li, C., Wang, X., & Shi, G. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1120299 · Cited by 668
25th Anniversary Article: Hybrid Nanostructures Based on Two‐Dimensional Nanomaterials
Huang, X., Tan, C., Yin, Z., & Zhang, H. (2014) · Advanced Materials · doi:10.1002/adma.201304964 · Cited by 632
Fast Gelation of Ti3C2Tx MXene Initiated by Metal Ions
Deng, Y., Shang, T., Wu, Z., Tao, Y., Luo, C., Liang, J., Han, D., Lyu, R., Qi, C., Lv, W., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902432 · Cited by 602
Seyedin, S., Uzun, S., Levitt, A., Anasori, B., Dion, G., Gogotsi, Y., & Razal, J. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910504 · Cited by 557
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S. (2019) · Advanced Materials · doi:10.1002/adma.201902725 · Cited by 460
Room-Temperature, Highly Durable Ti3C2Tx MXene/Graphene Hybrid Fibers for NH3 Gas Sensing
Lee, S. H., Eom, W., Shin, H., Ambade, R. B., Bang, J. H., Kim, H. W., & Han, T. H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b21765 · Cited by 435
Self-citationAdditive-Free MXene Liquid Crystals and Fibers
Zhang, J., Uzun, S., Seyedin, S., Lynch, P. A., Akuzum, B., Wang, Z., Qin, S., Alhabeb, M., Shuck, C. E., Lei, W., et al. (2020) · ACS Central Science · doi:10.1021/acscentsci.9b01217 · Cited by 364
Novel Graphene/Carbon Nanotube Composite Fibers for Efficient Wire‐Shaped Miniature Energy Devices
Sun, H., You, X., Deng, J., Chen, X., Yang, Z., Ren, J., & Peng, H. (2014) · Advanced Materials · doi:10.1002/adma.201305188 · Cited by 337
Ayres, C., Bowlin, G. L., Henderson, S. C., Taylor, L., Shultz, J., Alexander, J., Telemeco, T. A., & Simpson, D. G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.014 · Cited by 307
Highly Electrically Conductive Ag‐Doped Graphene Fibers as Stretchable Conductors
Xu, Z., Liu, Z., Sun, H., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201300774 · Cited by 289
Highly Conductive Ti3C2Tx MXene Hybrid Fibers for Flexible and Elastic Fiber‐Shaped Supercapacitors
Zhang, J., Seyedin, S., Qin, S. A., Wang, Z., Moradi, S., Yang, F., Lynch, P. A., Yang, W. R., Liu, J., Wang, X., et al. (2019) · Small · doi:10.1002/smll.201804732 · Cited by 280
Seyedin, S., Yanza, E. R. S., & Razal, J. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08355f · Cited by 279
Pu, J.-H., Zhao, X., Zha, X.-J., Bai, L., Ke, K., Bao, R.-Y., Liu, Z.-Y., Yang, M.-B., & Yang, W. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04352g · Cited by 279
High‐Performance Biscrolled MXene/Carbon Nanotube Yarn Supercapacitors
Wang, Z., Qin, S., Seyedin, S., Zhang, J., Wang, J., Levitt, A., Li, N., Haines, C., Ovalle‐Robles, R., Lei, W., et al. (2018) · Small · doi:10.1002/smll.201802225 · Cited by 267
Zhong, J., Sun, W., Wei, Q., Qian, X., Cheng, H.-M., & Ren, W. (2018) · Nature Communications · doi:10.1038/s41467-018-05723-2 · Cited by 251
Mojtabavi, M., VahidMohammadi, A., Liang, W., Beidaghi, M., & Wanunu, M. (2019) · ACS Nano · doi:10.1021/acsnano.8b08017 · Cited by 204
Macroscopic Fibers of Well‐Aligned Carbon Nanotubes by Wet Spinning
Zhang, S., Koziol, K. K. K., Kinloch, I. A., & Windle, A. H. (2008) · Small · doi:10.1002/smll.200700998 · Cited by 181
Ma, T., Gao, H., Cong, H., Yao, H., Wu, L., Yu, Z., Chen, S., & Yu, S. (2018) · Advanced Materials · doi:10.1002/adma.201706435 · Cited by 173
Bath Electrospinning of Continuous and Scalable Multifunctional MXene‐Infiltrated Nanoyarns
Levitt, A. S., Seyedin, S., Zhang, J., Wang, X., Razal, J. M., Dion, G., & Gogotsi, Y. G. (2020) · Small · doi:10.1002/smll.202002158 · Cited by 146
Dynamic assembly of liquid crystalline graphene oxide gel fibers for ion transport
Park, H., Lee, K. H., Kim, Y. B., Ambade, S. B., Noh, S. H., Eom, W., Hwang, J. Y., Lee, W. J., Huang, J., & Han, T. H. (2018) · Science Advances · doi:10.1126/sciadv.aau2104 · Cited by 131
Self-citationFacile Solution Processing of Stable MXene Dispersions towards Conductive Composite Fibers
Seyedin, S., Zhang, J., Usman, K. A. S., et al. (2019) · Global Challenges · doi:10.1002/gch2.201900037 · Cited by 124
Kim, J., Oh, J., Kotal, M., Koratkar, N. A., & Oh, I. (2017) · Nano Today · doi:10.1016/j.nantod.2017.04.008 · Cited by 90
Castro, M. A., Olivares, M. C. A., Putman, C. M., & Cebral, J. R. (2014) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-014-1189-z · Cited by 40
Measuring the Electrical Conductivity of Single Fibres
Rebouillat, S., & Lyons, M. E. G. (2011) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)18440-9 · Cited by 25
Liu, F., Dong, Y., Shi, R., Wang, E., Ni, Q., & Fu, Y. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.100909 · Cited by 24
Cited by
Advances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216
Pi, M., Qin, S., Wen, S., Wang, Z., Wang, X., Li, M., Lu, H., Meng, Q., Cui, W., & Ran, R. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202210188 · Cited by 282
Zhao, Y., Li, B., Zhong, M., Fan, H., Li, Z., Lyu, S., Xing, X., & Qin, W. (2025) · Science China Materials · doi:10.1007/s40843-024-3188-4 · Cited by 85
Metadata
- Authors
- Shin, H., Eom, W., Lee, K. H., Jeong, W., Kang, D. J., & Han, T. H.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-01-26
- Volume
- 15
- Issue
- 2
- Pages
- 3320-3329
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3123769793
- Cited by
- 343
- References
- 46
- FWCI
- 16.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.