The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Use of Synergistic Interactions to Fabricate Strong, Tough, and Conductive Artificial Nacre Based on Graphene Oxide and Chitosan
Abstract
Graphene is the strongest and stiffest material, leading to the development of promising applications in many fields. However, the assembly of graphene nanosheets into macrosized nanocomposites for practical applications remains a challenge. Nacre in its natural form sets the "gold standard" for toughness and strength, which serves as a guide to the assembly of graphene nanosheets into high-performance nanocomposites. Here we show the strong, tough, conductive artificial nacre based on graphene oxide through synergistic interactions of hydrogen and covalent bonding. Tensile strength and toughness was 4 and 10 times higher, respectively, than that of natural nacre. The exceptional integrated strong and tough artificial nacre has promising applications in aerospace, artificial muscle, and tissue engineering, especially for flexible supercapacitor electrodes due to its high electrical conductivity. The use of synergistic interactions is a strategy for the development of high-performance nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1990) · Cited by 9,358
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Chitin and chitosan: Properties and applications
Rinaudo, M. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.06.001 · Cited by 8,259
Chemical methods for the production of graphenes
Park, S., & Ruoff, R. S. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.58 · Cited by 6,663
Preparation and characterization of graphene oxide paper
Dikin, D. A., Stankovich, S., Zimney, E. J., Piner, R. D., Dommett, G. H. B., Evmenenko, G., Nguyen, S. T., & Ruoff, R. S. (2007) · Nature · doi:10.1038/nature06016 · Cited by 5,594
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Polymeric stabilization of colloidal dispersions
Napper, D. H. (1983) · Medical Entomology and Zoology · Cited by 2,279
Park, S., Lee, K.-S., Bozoklu, G., Cai, W., Nguyen, S. T., & Ruoff, R. S. (2008) · ACS Nano · doi:10.1021/nn700349a · Cited by 1,781
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
Nanostructured artificial nacre
Tang, Z., Kotov, N. A., Magonov, S., & Ozturk, B. (2003) · Nature Materials · doi:10.1038/nmat906 · Cited by 1,454
The mechanical design of nacre
Jackson, A. P., Vincent, J. F. V., & Turner, R. M. (1988) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1988.0056 · Cited by 1,269
Well-Dispersed Chitosan/Graphene Oxide Nanocomposites
Yang, X., Tu, Y., Li, L., Shang, S., & Tao, X.-M. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100222m · Cited by 755
Napper, D. H. (1977) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(77)90150-3 · Cited by 565
High‐Nanofiller‐Content Graphene Oxide–Polymer Nanocomposites via Vacuum‐Assisted Self‐Assembly
Putz, K. W., Compton, O. C., Palmeri, M. J., Nguyen, S. T., & Brinson, L. C. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000723 · Cited by 560
Walther, A., Bjurhager, I., Malho, J.-M., Pere, J., Ruokolainen, J., Berglund, L. A., & Ikkala, O. (2010) · Nano Letters · doi:10.1021/nl1003224 · Cited by 467
Li, Y., Yu, T., Yang, T., Zheng, L., & Liao, K. (2012) · Advanced Materials · doi:10.1002/adma.201200452 · Cited by 438
Self-citationCui, W., Li, M., Liu, J., Wang, B., Zhang, C., Jiang, L., & Cheng, Q. (2014) · ACS Nano · doi:10.1021/nn503755c · Cited by 401
Self-citationTian, Y., Cao, Y., Wang, Y., Yang, W., & Feng, J. (2013) · Advanced Materials · doi:10.1002/adma.201300118 · Cited by 390
Electrosteric Stabilization of Colloidal Dispersions
Fritz, G., Schädler, V., Willenbacher, N., & Wagner, N. J. (2002) · Langmuir · doi:10.1021/la015734j · Cited by 366
The Effect of Interlayer Adhesion on the Mechanical Behaviors of Macroscopic Graphene Oxide Papers
Gao, Y., Liu, L.-Q., Zu, S.-Z., Peng, K., Zhou, D., Han, B.-H., & Zhang, Z. (2011) · ACS Nano · doi:10.1021/nn103331x · Cited by 354
Bio‐Inspired Borate Cross‐Linking in Ultra‐Stiff Graphene Oxide Thin Films
An, Z., Compton, O. C., Putz, K. W., Brinson, L. C., & Nguyen, S. T. (2011) · Advanced Materials · doi:10.1002/adma.201101544 · Cited by 348
Nacre-mimetics with synthetic nanoclays up to ultrahigh aspect ratios
Das, P., Malho, J.-M., Rahimi, K., Schacher, F. H., Wang, B., Demco, D. E., & Walther, A. (2015) · Nature Communications · doi:10.1038/ncomms6967 · Cited by 334
Ultratough Artificial Nacre Based on Conjugated Cross‐linked Graphene Oxide
Cheng, Q., Wu, M., Li, M., Jiang, L., & Tang, Z. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201210166 · Cited by 334
Self-citationYao, H., Tan, Z., Fang, H., & Yu, S. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201004748 · Cited by 326
Bioinspired Layered Materials with Superior Mechanical Performance
Cheng, Q., Jiang, L., & Tang, Z. (2014) · Accounts of Chemical Research · doi:10.1021/ar400279t · Cited by 315
Self-citationYao, H., Ge, J., Mao, L., Yan, Y., & Yu, S. (2014) · Advanced Materials · doi:10.1002/adma.201303470 · Cited by 292
Wan, S., Li, Y., Peng, J., Hu, H., Cheng, Q., & Jiang, L. (2015) · ACS Nano · doi:10.1021/nn506148w · Cited by 224
Self-citationWalther, A., Bjurhager, I., Malho, J., Ruokolainen, J., Berglund, L., & Ikkala, O. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201001577 · Cited by 216
Ultratough, Ultrastrong, and Highly Conductive Graphene Films with Arbitrary Sizes
Zhang, M., Huang, L., Chen, J., Li, C., & Shi, G. (2014) · Advanced Materials · doi:10.1002/adma.201403322 · Cited by 208
pH-Responsive Chitosan-Mediated Graphene Dispersions
Fang, M., Long, J., Zhao, W., Wang, L., & Chen, G. (2010) · Langmuir · doi:10.1021/la102703b · Cited by 198
Learning from Nature: Constructing Integrated Graphene-Based Artificial Nacre
Cheng, Q., Duan, J., Zhang, Q., & Jiang, L. (2015) · ACS Nano · doi:10.1021/acsnano.5b01126 · Cited by 183
Self-citationZhu, B., Jasinski, N., Benitez, A., Noack, M., Park, D., Goldmann, A. S., Barner‐Kowollik, C., & Walther, A. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201502323 · Cited by 158
Written‐in Conductive Patterns on Robust Graphene Oxide Biopaper by Electrochemical Microstamping
Hu, K., Tolentino, L. S., Kulkarni, D. D., Ye, C., Kumar, S., & Tsukruk, V. V. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201307830 · Cited by 149
Liu, R.-Y., & Xu, A. (2014) · RSC Advances · doi:10.1039/c4ra08319a · Cited by 59
Cited by
Smith, A. T., LaChance, A. M., Zeng, S., Liu, B., & Sun, L. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.02.004 · Cited by 1,643
Zhang, Z., Yang, S., Zhang, P., Zhang, J., Chen, G., & Feng, X. (2019) · Nature Communications · doi:10.1038/s41467-019-10885-8 · Cited by 680
Cheng, C., Li, S., Thomas, A., Kotov, N. A., & Haag, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00520 · Cited by 527
Yu, R., Shi, Y., Yang, D., Liu, Y., Qu, J., & Yu, Z.-Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04655 · Cited by 325
Harito, C., Bavykin, D. V., Yuliarto, B., Dipojono, H. K., & Walsh, F. C. (2019) · Nanoscale · doi:10.1039/c9nr00117d · Cited by 287
Metadata
- Authors
- Wan, S., Peng, J., Li, Y., Hu, H., Jiang, L., & Cheng, Q.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-09-09
- Volume
- 9
- Issue
- 10
- Pages
- 9830-9836
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W1422534505
- Cited by
- 269
- References
- 34
- FWCI
- 13.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.