The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Continuous Carbon Nanotube–Ultrathin Graphite Hybrid Foams for Increased Thermal Conductivity and Suppressed Subcooling in Composite Phase Change Materials
Abstract
Continuous ultrathin graphite foams (UGFs) have been actively researched recently to obtain composite materials with increased thermal conductivities. However, the large pore size of these graphitic foams has resulted in large thermal resistance values for heat conduction from inside the pore to the high thermal conductivity graphitic struts. Here, we demonstrate that the effective thermal conductivity of these UGF composites can be increased further by growing long CNT networks directly from the graphite struts of UGFs into the pore space. When erythritol, a phase change material for thermal energy storage, is used to fill the pores of UGF-CNT hybrids, the thermal conductivity of the UGF-CNT/erythritol composite was found to increase by as much as a factor of 1.8 compared to that of a UGF/erythritol composite, whereas breaking the UGF-CNT bonding in the hybrid composite resulted in a drop in the effective room-temperature thermal conductivity from about 4.1 ± 0.3 W m(-1) K(-1) to about 2.9 ± 0.2 W m(-1) K(-1) for the same UGF and CNT loadings of about 1.8 and 0.8 wt %, respectively. Moreover, we discovered that the hybrid structure strongly suppresses subcooling of erythritol due to the heterogeneous nucleation of erythritol at interfaces with the graphitic structures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conversely, although adequate additives can significantly improve the thermal conductivity, the thermal storage density is considerably reduced due to the occupation of additives inside original channels.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [201]
Citations
Cites
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2002) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,758
Raman spectroscopy of carbon nanotubes
Dresselhaus, M. S., Dresselhaus, G., Saito, R., & Jório, A. (2005) · Physics Reports · doi:10.1016/j.physrep.2004.10.006 · Cited by 4,509
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378 · cited 1×
“sheets is their high intrinsic thermal conductivities (κ).(1-3) In these graphitic materials phonons are”
BackgroundSelf-citationA review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Water-Assisted Highly Efficient Synthesis of Impurity-Free Single-Walled Carbon Nanotubes
Hata, K., Futaba, D. N., Mizuno, K., Namai, T., Yumura, M., & Iijima, S. (2004) · Science · doi:10.1126/science.1104962 · Cited by 2,684
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Han, Z., & Fina, A. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.004 · Cited by 2,650
Two-Dimensional Phonon Transport in Supported Graphene
Seol, J. H., Jo, I., Moore, A. L., Lindsay, L., Aitken, Z. H., Pettes, M. T., Li, X., Yao, Z., Huang, R., Broido, D., et al. (2010) · Science · doi:10.1126/science.1184014 · Cited by 1,926
Self-citationStrong, Transparent, Multifunctional, Carbon Nanotube Sheets
Zhang, M., Fang, S., Zakhidov, A. A., Lee, S. B., Aliev, A. E., Williams, C. D., Atkinson, K. R., & Baughman, R. H. (2005) · Science · doi:10.1126/science.1115311 · Cited by 1,669
Evaluating the characteristics of multiwall carbon nanotubes
Lehman, J. H., Terrones, M., Mansfield, E., Hurst, K. E., & Meunier, V. (2011) · Carbon · doi:10.1016/j.carbon.2011.03.028 · Cited by 1,180
Research works printed but not linked: 1
- Bergman, T. L.; Lavine, A. S.; Incropera, F. P.; DeWitt, D. P.Fundamentals of Heat and Mass Transfer,7th ed.Wiley, 2011; p236.
Cited by
Sorted by citations
Thermal conductivity enhancement on phase change materials for thermal energy storage: A review
Wu, S., Yan, T., Kuai, Z., & Pan, W. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.10.010 · Cited by 962
Chen, J., Huang, X., Zhu, Y., & Jiang, P. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604754 · Cited by 758
Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
Two-Dimensional Materials for Thermal Management Applications
Song, H., Liu, J., Liu, B., Wu, J., Cheng, H., & Kang, F. (2018) · Joule · doi:10.1016/j.joule.2018.01.006 · Cited by 682
“concentrated heat transfer channels in GF/CNT/polymer composites (Figures 8C and 8D).(155) Similarly, 3D h-BN foam has been grown by Ni foam-templated CVD,(160) and showed nearly 3-fold improvement of thermal conductivity in h-BN/ PMMA composites.”
BackgroundInfluentialNanoconfined phase change materials for thermal energy applications
Aftab, W., Huang, X., Wu, W., Liang, Z., Mahmood, A., & Zou, R. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03587j · Cited by 647
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2020.100580 · Cited by 571
Phase Change Thermal Storage Materials for Interdisciplinary Applications
Wang, G., Tang, Z., Gao, Y. H., Liu, P., Li, Y., Li, A., & Chen, X. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00572 · Cited by 571
Wu, S., Li, T., Tong, Z., Chao, J., Zhai, T., Xu, J., Yan, T., Wu, M., Xu, Z., Bao, H., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905099 · Cited by 539
Zeng, X., Sun, J., Yao, Y., Sun, R., Xu, J., & Wong, C. (2017) · ACS Nano · doi:10.1021/acsnano.7b02359 · Cited by 528
Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion
Chen, X., Cheng, P., Tang, Z., Xu, X., Gao, H., & Wang, G. (2021) · Advanced Science · doi:10.1002/advs.202001274 · Cited by 483
Yuan, K., Shi, J., Aftab, W., Qin, M., Usman, A., Zhou, F., Lv, Y., Gao, S., & Zou, R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904228 · Cited by 459
Thermal conductivity of graphene-based polymer nanocomposites
Huang, X., Zhi, C., Lin, Y., Bao, H., Wu, G., Jiang, P., & Mai, Y. (2020) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2020.100577 · Cited by 419
Wu, M., Wu, S., Cai, Y., Wang, R. Z., & Li, T. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.07.019 · Cited by 411
Gao, H., Wang, J., Chen, X., Wang, G., Huang, X., Li, A., & Dong, W. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.007 · Cited by 391
Carbon-based functional nanomaterials: Preparation, properties and applications
Li, Z., Wang, L., Li, Y., Feng, Y., & Feng, W. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.04.028 · Cited by 389
Min, P., Liu, J., Li, X., An, F., Liu, P., Shen, Y., Koratkar, N., & Yu, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805365 · Cited by 375
Supercooling of phase-change materials and the techniques used to mitigate the phenomenon
Zahir, M. H., Mohamed, S. A., Saidur, R., & Al‐Sulaiman, F. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.045 · Cited by 360
Cheng, P., Chen, X., Gao, H., Zhang, X., Tang, Z., Li, A., & Wang, G. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105948 · Cited by 350
Yang, J., Tang, L., Bao, R., Bai, L., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.045 · Cited by 340
Zhang, Y., Heo, Y., Son, Y., In, I., An, K.-H., Kim, B.-J., & Park, S. (2018) · Carbon · doi:10.1016/j.carbon.2018.10.077 · Cited by 348
Polyurethane-based flexible and conductive phase change composites for energy conversion and storage
Aftab, W., Mahmood, A., Guo, W., Yousaf, M., Tabassum, H., Huang, X., Liang, Z., Cao, A., & Zou, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.10.014 · Cited by 326
Wu, S., Li, T., Wu, M., Xu, J., Hu, Y., Chao, J., Yan, T., & Wang, R. Z. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05904h · Cited by 312
Zhang, X., Zhao, N., & He, C. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100672 · Cited by 293
Zhang, L., Zhou, K., Wei, Q., Ma, L., Ye, W., Li, H., Zhou, B., Yu, Z., Lin, C.-T., Luo, J., et al. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.10.036 · Cited by 282
Xu, X., Hu, R., Chen, M., Dong, J., Xiao, B., Wang, Q., & Wang, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125447 · Cited by 273
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2019) · Materials Horizons · doi:10.1039/c8mh01219a · Cited by 269
Li, M., & Mu, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.085 · Cited by 268
Shen, X., Zheng, Q., & Kim, J. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 277
Self-citationXue, F., Lu, Y., Qi, X.-D., Yang, J.-H., & Wang, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.023 · Cited by 264
Dai, W., Lv, L., Lu, J., Hou, H., Yan, Q., Alam, F. E., Li, Y., Zeng, X., Yu, J., Wei, Q., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b07337 · Cited by 257
Qi, G., Yang, J., Bao, R., Xia, D., Cao, M., Yang, W. M., Yang, M., & Wei, D. (2016) · Nano Research · doi:10.1007/s12274-016-1333-1 · Cited by 257
“Therefore, an approach to engineer the pore structure by growing a network of CNTs inside the pores, which further improves the thermal conductivity of the composite PCM compared with a composite PCM with only GF, was recently reported [1].”
BackgroundYang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08454k · Cited by 255
Chen, X., Gao, H., Yang, M., Dong, W., Huang, X., Li, A., Dong, C., & Wang, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.075 · Cited by 250
Rate capability and Ragone plots for phase change thermal energy storage
Woods, J., Mahvi, A. J., Goyal, A., Kozubal, E., Odukomaiya, A., & Jackson, R. K. (2021) · Nature Energy · doi:10.1038/s41560-021-00778-w · Cited by 255
An, F., Li, X., Min, P., Liu, P., Jiang, Z., & Yu, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04230 · Cited by 251
Han, G., Zhao, X., Feng, Y., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127099 · Cited by 241
Palacios, A., Cong, L., Navarro, M. E., Ding, Y., & Barreneche, C. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.020 · Cited by 237
Phononics of Graphene and Related Materials
Balandin, A. A. (2020) · ACS Nano · doi:10.1021/acsnano.0c02718 · Cited by 226
Nanocomposite phase change materials for high-performance thermal energy storage: A critical review
Li, Z., Hu, N., & Fan, L. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.12.037 · Cited by 234
Dai, W., Lv, L., Ma, T., Wang, X., Ying, J., Yan, Q., Tan, X., Gao, J., Chen, X., Yu, J., et al. (2021) · Advanced Science · doi:10.1002/advs.202003734 · Cited by 231
Yang, Z. L., Walvekar, R., Wong, W. P., Sharma, R. K., Dharaskar, S. A., & Khalid, M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111329 · Cited by 238
Thermal Properties of Two Dimensional Layered Materials
Wang, Y., Xu, N., Li, D., & Zhu, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604134 · Cited by 224
Tong, X., Li, N., Zeng, M., & Wang, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.031 · Cited by 222
Solar-thermal conversion and thermal energy storage of graphene foam-based composites
Zhang, L., Li, R., Tang, B., & Wang, P. (2016) · Nanoscale · doi:10.1039/c6nr03921a · Cited by 217
Dynamic tuning of optical absorbers for accelerated solar-thermal energy storage
Wang, Z., Tong, Z., Ye, Q., Hu, H., Nie, X., Chen, Y., Shang, W., Song, C., Wu, J., Wang, J., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-01618-w · Cited by 213
Yang, J., Shen, X., Yang, W. M., & Kim, J. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101054 · Cited by 213
Self-citationChen, J., Han, W., Bao, H., Jiang, P., & Huang, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10810 · Cited by 210
Yang, J., Qi, G.-Q., Tang, L., Bao, R., Bai, L., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03733j · Cited by 200
2D Materials‐Based Thermal Interface Materials: Structure, Properties, and Applications
Dai, W., Wang, Y., Li, M., Chen, L., Yan, Q., Yu, J., Jiang, N., & Lin, C. (2024) · Advanced Materials · doi:10.1002/adma.202311335 · Cited by 209
Fundamentals and scopes of doped carbon nanotubes towards energy and biosensing applications
Muhulet, A., Miculescu, F., Voicu, Ș. I., Schütt, F., Thakur, V. K., & Mishra, Y. K. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.05.002 · Cited by 195
Yan, Q., Alam, F. E., Gao, J., Dai, W., Tan, X., Lv, L., Wang, J., Zhang, H., Chen, D., Nishimura, K., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104062 · Cited by 197
Lin, Y., Kang, Q., Han, W., Bao, H., Jiang, P., Mai, Y., & Huang, X. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00702-7 · Cited by 193
Wu, M., Li, T., Wang, P., Wu, S., Wang, R. Z., & Lin, J. (2021) · Small · doi:10.1002/smll.202105647 · Cited by 194
Zhang, X., Wen, R., Huang, Z., Tang, C., Huang, Y., Liu, Y., Fang, M., Wu, X., Min, X., & Xu, Y. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.05.037 · Cited by 189
Allahbakhsh, A., & Arjmand, M. (2019) · Carbon · doi:10.1016/j.carbon.2019.04.009 · Cited by 180
Toward highly thermally conductive all-carbon composites: Structure control
Feng, W., Qin, M., & Feng, Y. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.059 · Cited by 176
Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective
Ding, Z., Wu, W., & Leung, M. K. H. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111088 · Cited by 186
Latibari, S. T., & Sadrameli, S. M. (2018) · Solar Energy · doi:10.1016/j.solener.2018.05.007 · Cited by 170
Yao, Y., Ye, Z., Huang, F., Zeng, X., Zhang, T., Shang, T., Han, M., Zhang, W., Ren, L., Sun, R., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19280 · Cited by 163
Shen, X., Wang, Z., Wu, Y., Liu, X., He, Y., Zheng, Q., Yang, Q., Kang, F., & Kim, J. (2018) · Materials Horizons · doi:10.1039/c7mh00984d · Cited by 160
Self-citationFlexible monolithic phase change material based on carbon nanotubes/chitosan/poly(vinyl alcohol)
Cheng, P., Gao, H., Chen, X., Chen, Y., Han, M., Xing, L., Liu, P., & Wang, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125330 · Cited by 160
Dutta, V., Verma, R., Gopalkrishnan, C., Yuan, M.-H., Batoo, K. M., Jayavel, R., Chauhan, A., Lin, K. A., Ravindran, B., & Ghotekar, S. K. (2022) · Inorganics · doi:10.3390/inorganics10100169 · Cited by 160
Ying, J., Tan, X., Lv, L., Wang, X., Gao, J., Yan, Q., Ma, H., Nishimura, K., Li, H., Yu, J., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c01332 · Cited by 150
Tang, J., Yang, M. R., Fang, Y., Chen, X., Tan, L., & Wang, G. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.11.043 · Cited by 148
Next generation phase change materials: State-of-the-art towards sustainable future
Kalidasan, B., & Pandey, A. K. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101380 · Cited by 154
Li, Y., Chen, Y., Huang, X., Jiang, S., & Wang, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129086 · Cited by 145
Zhang, X., Yin, Z., Meng, D., Huang, Z., Wen, R., Huang, Y., Min, X., Liu, Y., Fang, M., & Wu, X. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.05.026 · Cited by 143
Yuan, M., Ren, Y., Xu, C., Ye, F., & Du, X. (2019) · Renewable Energy · doi:10.1016/j.renene.2018.12.107 · Cited by 141
Tang, L., Yang, J., Bao, R., Liu, Z., Xie, B., Yang, M., & Yang, W. M. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.05.037 · Cited by 140
PEG/3D graphene oxide network form-stable phase change materials with ultrahigh filler content
Qiu, J., Fan, X., Shi, Y., Zhang, S., Jin, X., Wang, W., & Tang, B. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07629h · Cited by 137
Chen, S., Feng, Y., Qin, M., Ji, T., & Feng, W. (2017) · Carbon · doi:10.1016/j.carbon.2017.01.103 · Cited by 134
Wei, X., Xue, F., Qi, X.-D., Yang, J.-H., Zhou, Z.-W., Yuan, Y.-P., & Wang, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.091 · Cited by 133
A mini review on thermally conductive polymers and polymer-based composites
Xu, Y., Wang, X., & Hao, Q. (2021) · Composites Communications · doi:10.1016/j.coco.2020.100617 · Cited by 132
Yan, X., Zhao, H., Feng, Y., et al. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109435 · Cited by 130
Structurally advanced hybrid support composite phase change materials: Architectural synergy
Atinafu, D. G., Yun, B. Y., Yang, S., Yuk, H., Wi, S., & Kim, S. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.07.022 · Cited by 134
Aftab, W., Khurram, M., Jinming, S., Tabassum, H., Liang, Z., Ali, U., Guo, W., Huang, X., Wu, W., Yao, R., et al. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.07.032 · Cited by 124
Thermal Transport in 3D Nanostructures
Zhan, H., Nie, Y., Chen, Y., Bell, J. M., & Gu, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903841 · Cited by 134
Jiang, T., Ya-li, Z., Olayiwola, S. O., Lau, C., Fan, M., Ng, K. W., & Tan, G. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100905 · Cited by 121
Li, A., Wang, J., Dong, C., Dong, W., Atinafu, D. G., Chen, X., Gao, H., & Wang, G. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.106 · Cited by 122
Wang, Y., Li, S., Zhang, T., et al. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.06.027 · Cited by 117
Review on Nanostructure Supporting Material Strategies in Shape-stabilized Phase Change Materials
Abdeali, G., Bahramian, A. R., & Abdollahi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101299 · Cited by 117
Zhang, T., Chen, X., Yang, M. R., Xu, X., Sun, Y., Li, Y., Wang, J., & Wang, G. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110600 · Cited by 116
An elegant coupling: Freeze-casting and versatile polymer composites
Yang, J., Yang, W. M., Chen, W., & Tao, X. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101289 · Cited by 114
Zhu, W., Hu, N., Wei, Q., Zhang, L., Li, H., Luo, J., Lin, C.-T., Ma, L., Zhou, K., & Yu, Z. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107709 · Cited by 114
Zeng, J., Chen, Y., Shu, L., Yu, L., Zhu, L., Song, L., Cao, Z. Y., & Sun, L. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.01.012 · Cited by 112
Liu, P., An, F., Lü, X., Li, X., Min, P., Shu, C., Li, W., & Yu, Z. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108492 · Cited by 112
Xue, F., Qi, X., Huang, T. K., Tang, C., Zhang, N., & Wang, Y. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129620 · Cited by 110
Singh, P., Sharma, R. K., Khalid, M., Goyal, R., Sarı, A., & Tyagi, V. V. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111896 · Cited by 112
Wang, J., Jia, X., Atinafu, D. G., Wang, M., Wang, G., & Lu, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05594c · Cited by 109
Emerging surface strategies for porous materials-based phase change composites
Li, H., Hu, C., He, Y., Sun, Z., Yin, Z., & Tang, D. (2022) · Matter · doi:10.1016/j.matt.2022.07.013 · Cited by 110
Xue, F., Jin, X.-Z., Xie, X., Qi, X., Yang, J., & Wang, Y. (2019) · Nanoscale · doi:10.1039/c9nr07273j · Cited by 108
A review of thermal interface material fabrication method toward enhancing heat dissipation
Bahru, R., Zamri, M. F. M. A., Shamsuddin, A. H., Shaari, N., & Mohamed, M. A. (2020) · International Journal of Energy Research · doi:10.1002/er.6078 · Cited by 113
Wang, R., Cheng, H., Gong, Y. H., Wang, F., Ding, X., Hu, R. H., Zhang, X., He, J., & Tian, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b15259 · Cited by 107
Zhang, X., Huang, Z., Yin, Z., Zhang, W., Huang, Y., Liu, Y., Fang, M., Wu, X., & Min, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.057 · Cited by 107
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00565 · Cited by 105
Zhang, X., Lin, Q., Luo, H., & Luo, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114278 · Cited by 107
Graphene aerogel-based phase changing composites for thermal energy storage systems
Kashyap, S., Kabra, S., & Kandasubramanian, B. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04325-7 · Cited by 104
Chen, X., Yu, H., Gao, Y. H., Wang, L., & Wang, G. (2022) · EnergyChem · doi:10.1016/j.enchem.2022.100071 · Cited by 104
Ye, Q., Tao, P., Chang, C., Zhou, L., Zeng, X., Song, C., Shang, W., Wu, J., & Deng, T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17492 · Cited by 103
Shen, S., Tan, S., Wu, S. J., Guo, C., Liang, J., Qian, Y., Xu, G., & Deng, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.072 · Cited by 102
Metadata
- Authors
- Kholmanov, I., Kim, J., Ou, E., Ruoff, R. S., & Shi, L.
- Affiliations
- Texas Materials Institute (US)
- Texas Materials Institute and Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States
- Institute for Basic Science (KR)
- Corresponding author
- Kholmanov, Iskandar
- Shi, Li
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-09
- Volume
- 9
- Issue
- 12
- Pages
- 11699-11707
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2210958799
- Semantic Scholar
- da9c7ce2a81f804ff922c050918d8faa3adefd95
- Cited by
- 341
- References
- 43
- Citations by year
- 2026: 9 · 2025: 16 · 2024: 32 · 2023: 21 · 2022: 38 · 2021: 48 · 2020: 48 · 2019: 51 · 2018: 38 · 2017: 28 · 2016: 12
- FWCI
- 10.55
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- INO Open Portal (submittedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- Institute for Basic Science (IBS-R019-D1)
- Advanced Research Projects Agency - Energy (DE-AR0000178)
- Basic Energy Sciences (DE-FG02-07ER46377)
- Office of Naval Research (N00014-14-1-0258)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Carbon Nanotubes in Composites
- Keywords
- carbon nanotubes, hybrid composites, thermal conductivity, phase change materials, erythritol, thermal energy storage, heterogeneous nucleation, CNT networks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review