The DOI matches its Crossref record.
Extraordinarily High Conductivity of Stretchable Fibers of Polyurethane and Silver Nanoflowers
Abstract
Stretchable conductive composites have received considerable attention recently, and they should have high conductivity and mechanical strength. Here we report highly conductive stretchable fibers synthesized by the scalable wet spinning process using flower-shaped silver nanoparticles with nanodisc-shaped petals (Ag nanoflowers) and polyurethane. An extraordinarily high conductivity (41,245 S cm(-1)) was obtained by Ag nanoflowers, which is 2 orders of magnitude greater than that of fibers synthesized using spherical Ag nanoparticles. This was due to the enhanced surface area and vigorous coalescence of nanodisc-shaped petals during the curing process. There was a trade-off relationship between conductivity and stretchability, and the maximum rupture strain was 776%. An analytical model revealed that the enhanced adhesion between Ag nanoflowers and polyurethane provided a high Young's modulus (731.5 MPa) and ultimate strength (39.6 MPa) of the fibers. The fibers exhibited an elastic property after prestretching, and the resistance change of weft-knitted fabric was negligible up to 200% strain. The fibers with extraordinarily high conductivity, stretchability, and mechanical strength may be useful for wearable electronics applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Technology Roadmap for Flexible Sensors
Luo, Y., Abidian, M. R., Ahn, J.-H., Akinwande, D., Andrews, A. M., Antonietti, M., Bao, Z., Berggren, M., Berkey, C. A., Bettinger, C. J., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c12606 · Cited by 1,383
Recent advances in wearable tactile sensors: Materials, sensing mechanisms, and device performance
Yang, T., Xie, D., Li, Z., & Zhu, H. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.02.001 · Cited by 750
Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes
Matsuhisa, N., Inoue, D., Zalar, P., Jin, H., Matsuba, Y., Itoh, A., Yokota, T., Hashizume, D., & Someya, T. (2017) · Nature Materials · doi:10.1038/nmat4904 · Cited by 750
Materials and Structures toward Soft Electronics
Wang, C., Wang, C., Huang, Z., & Xu, S. (2018) · Advanced Materials · doi:10.1002/adma.201801368 · Cited by 662
Choi, S., Han, S. I., Kim, D., Hyeon, T., & Kim, D.-H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00706c · Cited by 591
Materials and structural designs of stretchable conductors
Matsuhisa, N., Chen, X., Bao, Z., & Someya, T. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00814k · Cited by 566
Advanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
Zhao, S., Li, J., Cao, D., Zhang, G., Li, J., Li, K., Yang, Y., Wang, W., Jin, Y., Sun, R., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13800 · Cited by 443
Material‐Based Approaches for the Fabrication of Stretchable Electronics
Kim, D. C., Shim, H. J., Lee, W., Koo, J. H., & Kim, D. (2020) · Advanced Materials · doi:10.1002/adma.201902743 · Cited by 438
Highly conductive and elastic nanomembrane for skin electronics
Jung, D., Lim, C., Shim, H. J., Kim, Y., Park, C., Jung, J., Han, S. I., Sunwoo, S.-H., Cho, K. W., Cha, G. D., et al. (2021) · Science · doi:10.1126/science.abh4357 · Cited by 403
Lu, Y., Biswas, M. C., Guo, Z., Jeon, J.-W., & Wujcik, E. K. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.08.037 · Cited by 391
Lee, J., Llerena Zambrano, B., Woo, J., Yoon, K., & Lee, T. (2020) · Advanced Materials · doi:10.1002/adma.201902532 · Cited by 389
Lee, J., Shin, S., Lee, S., Song, J., Kang, S., Han, H., Kim, S., Kim, S., Seo, J., Kim, D., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07795 · Cited by 282
Suh, D., Moon, C. M., Kim, D., & Baik, S. (2016) · Advanced Materials · doi:10.1002/adma.201600642 · Cited by 278
Self-citationGao, Y., Guo, F., Cao, P., Liu, J., Li, D., Wu, J., Wang, N., Su, Y., & Zhao, Y. (2020) · ACS Nano · doi:10.1021/acsnano.9b09533 · Cited by 261
Mechanoresponsive Polymerized Liquid Metal Networks
Thrasher, C. J., Farrell, Z. J., Morris, N. J., Willey, C. L., & Tabor, C. E. (2019) · Advanced Materials · doi:10.1002/adma.201903864 · Cited by 257
Guo, W., Zheng, P., Huang, X., Zhuo, H., Wu, Y., Yin, Z., Li, Z., & Wu, H. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21836 · Cited by 125
Rational design of biodegradable thermoplastic polyurethanes for tissue repair
Xu, C., & Hong, Y. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.11.029 · Cited by 109
Shajari, S., Mahmoodi, M., Rajabian, M., Karan, K., Sundararaj, U., & Sudak, L. J. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.201901067 · Cited by 58
Metadata
- Authors
- Ma, R., Kang, B., Cho, S., Choi, M., & Baik, S.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-20
- Volume
- 9
- Issue
- 11
- Pages
- 10876-10886
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2178988079
- Cited by
- 185
- References
- 0
- FWCI
- 6.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.