The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
A Photonic Crystal Laser from Solution Based Organo-Lead Iodide Perovskite Thin Films
Open accessAbstract
Perovskite semiconductors are actively investigated for high performance solar cells. Their large optical absorption coefficient and facile solution-based, low-temperature synthesis of thin films make perovskites also a candidate for light-emitting devices across the visible and near-infrared. Specific to their potential as optical gain medium for lasers, early work has demonstrated amplified spontaneous emission and lasing at attractively low thresholds of photoexcitation. Here, we take an important step toward practically usable perovskite lasers where a solution-processed thin film is embedded within a two-dimensional photonic crystal resonator. We demonstrate high degree of temporally and spatially coherent lasing whereby well-defined directional emission is achieved near 788 nm wavelength at optical pumping energy density threshold of 68.5 ± 3.0 μJ/cm(2). The measured power conversion efficiency and differential quantum efficiency of the perovskite photonic crystal laser are 13.8 ± 0.8% and 35.8 ± 5.4%, respectively. Importantly, our approach enables scalability of the thin film lasers to a two-dimensional multielement pixelated array of microlasers which we demonstrate as a proof-of-concept for possible projection display applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Self-citationSolvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Self-citationLead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
High-Q photonic nanocavity in a two-dimensional photonic crystal
Akahane, Y., Asano, T., Song, B.-S., & Noda, S. (2003) · Nature · doi:10.1038/nature02063 · Cited by 2,765
Two-Dimensional Photonic Band-Gap Defect Mode Laser
Painter, O., Lee, R. K., Scherer, A., Yariv, A., O'Brien, J. D., Dapkus, P. D., & Kim, I. (1999) · Science · doi:10.1126/science.284.5421.1819 · Cited by 2,370
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Cited by
High Defect Tolerance in Lead Halide Perovskite CsPbBr3
Kang, J., & Wang, L.-W. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02800 · Cited by 1,305
Metal Halide Perovskite for next-generation optoelectronics: progresses and prospects
Dong, H., Ran, C., Gao, W., Li, M., Xia, Y., & Huang, W. (2023) · eLight · doi:10.1186/s43593-022-00033-z · Cited by 498
Advances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
Halide Perovskite Semiconductor Lasers: Materials, Cavity Design, and Low Threshold
Zhang, Q., Shang, Q., Su, R., Do, T. T. H., & Xiong, Q. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c03593 · Cited by 417
Materials chemistry and engineering in metal halide perovskite lasers
Dong, H., Zhang, C., Liu, X., Yao, J., & Zhao, Y. S. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00598f · Cited by 411
Metal Halide Perovskites for Laser Applications
Lei, L., Dong, Q., Gundogdu, K., & So, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010144 · Cited by 378
Halide perovskites for high-performance X-ray detector
Li, Z., Zhou, F., Yao, H., Ci, Z., Yang, Z., & Jin, Z. (2021) · Materials Today · doi:10.1016/j.mattod.2021.01.028 · Cited by 370
CsPbBr3 Perovskite Quantum Dot Vertical Cavity Lasers with Low Threshold and High Stability
Huang, C.-Y., Zou, C., Mao, C., Corp, K. L., Yao, Y.-C., Lee, Y.-J., Schlenker, C. W., Jen, A. K. Y., & Lin, L. Y. (2017) · ACS Photonics · doi:10.1021/acsphotonics.7b00520 · Cited by 346
Zhang, Y., Lim, C.-K., Dai, Z., Yu, G., Haus, J. W., Zhang, H., & Prasad, P. N. (2019) · Physics Reports · doi:10.1016/j.physrep.2019.01.005 · Cited by 337
Resonant leaky modes in all-dielectric metasystems: Fundamentals and applications
Huang, L., Xu, L., Powell, D. A., Padilla, W. J., & Miroshnichenko, A. E. (2023) · Physics Reports · doi:10.1016/j.physrep.2023.01.001 · Cited by 328
Broadly tunable metal halide perovskites for solid-state light-emission applications
Adjokatse, S., Fang, H.-H., & Loi, M. A. (2017) · Materials Today · doi:10.1016/j.mattod.2017.03.021 · Cited by 286
Solution‐Processed Tin‐Based Perovskite for Near‐Infrared Lasing
Xing, G., Kumar, M. H., Chong, W. K., Liu, X., Cai, Y., Ding, H., Asta, M., Grätzel, M., Mhaisalkar, S., Mathews, N., et al. (2016) · Advanced Materials · doi:10.1002/adma.201601418 · Cited by 269
Self-citationDiode-Pumped Organo-Lead Halide Perovskite Lasing in a Metal-Clad Distributed Feedback Resonator
Jia, Y., Kerner, R. A., Grede, A. J., Brigeman, A. N., Rand, B. P., & Giebink, N. C. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01946 · Cited by 216
Plasmonic–perovskite solar cells, light emitters, and sensors
Ai, B., Fan, Z., & Wong, Z. J. (2022) · Microsystems & Nanoengineering · doi:10.1038/s41378-021-00334-2 · Cited by 172
Yang, Z., Xu, Q., Wang, X., Lu, J., Wang, H., Li, F., Zhang, L., Hu, G., & Pan, C. (2018) · Advanced Materials · doi:10.1002/adma.201802110 · Cited by 143
Micro‐ and Nanostructured Lead Halide Perovskites: From Materials to Integrations and Devices
Wang, K., Xing, G., Song, Q., & Xiao, S. (2021) · Advanced Materials · doi:10.1002/adma.202000306 · Cited by 126
Triple cation mixed-halide perovskites for tunable lasers
Brenner, P., Glöckler, T., Rueda-Delgado, D., Abzieher, T., Jakoby, M., Richards, B. S., Paetzold, U. W., Howard, I. A., & Lemmer, U. (2017) · Optical Materials Express · doi:10.1364/ome.7.004082 · Cited by 42
Wang, H., Liu, P., Zhang, M., Han, B., Wang, G., Zhang, J., Hu, S., Li, H., Guo, Y., Zhao, G., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202209942 · Cited by 12
Metadata
- Authors
- Chen, S., Roh, K., Lee, J., Chong, W. K., Lu, Y., Mathews, N., Sum, T. C., & Nurmikko, A.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-21
- Volume
- 10
- Issue
- 4
- Pages
- 3959-3967
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2306803460
- Cited by
- 267
- References
- 35
- FWCI
- 16.62
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.