Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 210 of the 210 references it cites were found in a registry or an index.

Plasmonic–perovskite solar cells, light emitters, and sensors

Open access
Ai, Bin, Fan, Ziwei, Wong, Zi Jing·2022·Microsystems & Nanoengineering

Abstract

The field of plasmonics explores the interaction between light and metallic micro/nanostructures and films. The collective oscillation of free electrons on metallic surfaces enables subwavelength optical confinement and enhanced light–matter interactions. In optoelectronics, perovskite materials are particularly attractive due to their excellent absorption, emission, and carrier transport properties, which lead to the improved performance of solar cells, light-emitting diodes (LEDs), lasers, photodetectors, and sensors. When perovskite materials are coupled with plasmonic structures, the device performance significantly improves owing to strong near-field and far-field optical enhancements, as well as the plasmoelectric effect. Here, we review recent theoretical and experimental works on plasmonic perovskite solar cells, light emitters, and sensors. The underlying physical mechanisms, design routes, device performances, and optimization strategies are summarized. This review also lays out challenges and future directions for the plasmonic perovskite research field toward next-generation optoelectronic technologies.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41378-021-00334-2

Cites

210 of 210 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Outline of perovskites and plasmonics. a Structure of a halide perovskite unit cell. b Photoluminescence spectrum (left axis) and absorption spectrum as measured by photothermal deflection spectroscopy (PDS, right axis) of a (Cs0.06MA0.15FA0.79)Pb(I0.85Br0.15)3 thin film. Adapted with permission213. Copyright 2019, Wiley. c Schematic of the process of photocarrier extraction and light emission. d Photon dispersion in the bulk of a metal and surface plasmon polariton dispersion on the surface of the same metal and a dielectric. e Surface plasmon polariton (SPP) and (f) localized surface plasmon resonance modes (LSPRs).
Fig. 1 Outline of perovskites and plasmonics. a Structure of a halide perovskite unit cell. b Photoluminescence spectrum (left axis) and absorption spectrum as measured by photothermal deflection spectroscopy (PDS, right axis) of a (Cs0.06MA0.15FA0.79)Pb(I0.85Br0.15)3 thin film. Adapted with permission213. Copyright 2019, Wiley. c Schematic of the process of photocarrier extraction and light emission. d Photon dispersion in the bulk of a metal and surface plasmon polariton dispersion on the surface of the same metal and a dielectric. e Surface plasmon polariton (SPP) and (f) localized surface plasmon resonance modes (LSPRs).CC BY · PubMed Central
Fig. 2 Different configurations of simulated plasmonic nanoparticle-assisted perovskite solar cells. Schematics of plasmonic–perovskite solar cells by incorporating (a) Au nanoparticles (NPs). Adapted with permission76. Copyright 2019, MPDI. b Ag–Au dimer. Adapted with permission84. Copyright 2017, SPIE. c Two Au–SiO2 core–shell nanoparticles. Adapted with permission85. Copyright 2018, IOP Publishing, Ltd. d Al nanoparticle array. Adapted with permission87. Copyright 2019, OSA Publishing. e Lumpy nanoparticles on the rear surface. Adapted with permission90. Copyright 2015, OSA Publishing. f Spherical, cylindrical, and conic NP arrays on the rear surfaces. Adapted with permission91. Copyright 2018, Elsevier. g AgNW nanocross array. Adapted with permission93. Copyright 2017, OSA Publishing. The TMM and 3D FDTD method were used for (a). The plasmon hybridization, dipolar–dipolar coupling method, and FDTD simulation were used for (b). The 3D FDTD method was used for (c). Effective medium theory and a detailed balance analysis were applied for (d). FDTD was used for (e–g).
Fig. 2 Different configurations of simulated plasmonic nanoparticle-assisted perovskite solar cells. Schematics of plasmonic–perovskite solar cells by incorporating (a) Au nanoparticles (NPs). Adapted with permission76. Copyright 2019, MPDI. b Ag–Au dimer. Adapted with permission84. Copyright 2017, SPIE. c Two Au–SiO2 core–shell nanoparticles. Adapted with permission85. Copyright 2018, IOP Publishing, Ltd. d Al nanoparticle array. Adapted with permission87. Copyright 2019, OSA Publishing. e Lumpy nanoparticles on the rear surface. Adapted with permission90. Copyright 2015, OSA Publishing. f Spherical, cylindrical, and conic NP arrays on the rear surfaces. Adapted with permission91. Copyright 2018, Elsevier. g AgNW nanocross array. Adapted with permission93. Copyright 2017, OSA Publishing. The TMM and 3D FDTD method were used for (a). The plasmon hybridization, dipolar–dipolar coupling method, and FDTD simulation were used for (b). The 3D FDTD method was used for (c). Effective medium theory and a detailed balance analysis were applied for (d). FDTD was used for (e–g).CC BY · PubMed Central
Fig. 3 Summary of published experimental works on plasmonic–perovskite solar cells. a Breakdown of NP locations in perovskite solar cells. b Plots of max PCErelat, average PCErelat, and average plain PCErelat as a function of NP locations. Distribution chart of (c) size and (d) concentration of NPs in perovskite solar cells. e J–V curves of perovskite solar cells with NPs embedded in different positions102. Copyright 2017, ACS. f J–V curves obtained for different types of metallic nanostructures110. Copyright 2017, RSC. g J–V curves of perovskite solar cells based on mesoscopic TiO2, AuNRs and different Au@Ag-incorporated electrodes116. Copyright 2017, Elsevier.
Fig. 3 Summary of published experimental works on plasmonic–perovskite solar cells. a Breakdown of NP locations in perovskite solar cells. b Plots of max PCErelat, average PCErelat, and average plain PCErelat as a function of NP locations. Distribution chart of (c) size and (d) concentration of NPs in perovskite solar cells. e J–V curves of perovskite solar cells with NPs embedded in different positions102. Copyright 2017, ACS. f J–V curves obtained for different types of metallic nanostructures110. Copyright 2017, RSC. g J–V curves of perovskite solar cells based on mesoscopic TiO2, AuNRs and different Au@Ag-incorporated electrodes116. Copyright 2017, Elsevier.CC BY · PubMed Central
Fig. 4 Mechanisms behind NP-assisted perovskite solar cells. a Far-field scattering and near-field absorption can both occur upon light illumination of NPs. Forward and backward far-field scattering will increase the optical path length, which leads to more absorption events within the light-absorbing semiconductor. Near-field absorption enhances the electric field, photothermal conversion, and hot electron injection. E-field enhancement brings stronger oscillation energy for faster electron–hole separation and electron (hole) transfer. Electrons will escape from the metal NPs to the active layer, inducing hot electron injection. This phenomenon provides extra electron–hole pairs for current extraction. b In addition to the optical effects, the incorporation of plasmonic nanoparticles in perovskite materials also influences the electrical conductivity, surface roughness, perovskite crystal quality, and surface passivation, which are all crucial factors to realize highly efficient and stable perovskite solar cells.
Fig. 4 Mechanisms behind NP-assisted perovskite solar cells. a Far-field scattering and near-field absorption can both occur upon light illumination of NPs. Forward and backward far-field scattering will increase the optical path length, which leads to more absorption events within the light-absorbing semiconductor. Near-field absorption enhances the electric field, photothermal conversion, and hot electron injection. E-field enhancement brings stronger oscillation energy for faster electron–hole separation and electron (hole) transfer. Electrons will escape from the metal NPs to the active layer, inducing hot electron injection. This phenomenon provides extra electron–hole pairs for current extraction. b In addition to the optical effects, the incorporation of plasmonic nanoparticles in perovskite materials also influences the electrical conductivity, surface roughness, perovskite crystal quality, and surface passivation, which are all crucial factors to realize highly efficient and stable perovskite solar cells.CC BY · PubMed Central
Fig. 5 Plasmonic film-assisted perovskite solar cells. a 3D schematic diagrams and cross-sectional view of the hole-conductor-free PSC with the nanohemispherical Au electrode. Adapted with permission135. Copyright 2019, SPIE. b 3D schematics of the simulated PSC models with planar films, rectangular wire gratings, triangular wire gratings, and circular wire gratings. Adapted with permission136. Copyright 2018, Elsevier. c Performance comparison of PSCs with spiro-, P3HT, and periodic microstructure composite (PMC) HTLs. Adapted with permission137. Copyright 2016, RSC. The inset shows the simulated light field distribution of the 3D PMC HTL/Au at 668 nm and the enhanced optical transmission due to the hole. d SEM and AFM images of the grating and moth-eye patterned PCBM layers. e J–V curves of the flat, grating, and moth-eye patterned PSCs. Adapted with permission138. Copyright 2017, Wiley. The performance (Jsc and PCE) of the PSCs are improved by plasmonic films due to the great enhancement in light absorption, which is attributed to the excitation of the diverse plasmonic and photonic modes, including dipole-like LSPR, SPP modes, Bloch modes, cavity modes, and their mutual couplings.
Fig. 5 Plasmonic film-assisted perovskite solar cells. a 3D schematic diagrams and cross-sectional view of the hole-conductor-free PSC with the nanohemispherical Au electrode. Adapted with permission135. Copyright 2019, SPIE. b 3D schematics of the simulated PSC models with planar films, rectangular wire gratings, triangular wire gratings, and circular wire gratings. Adapted with permission136. Copyright 2018, Elsevier. c Performance comparison of PSCs with spiro-, P3HT, and periodic microstructure composite (PMC) HTLs. Adapted with permission137. Copyright 2016, RSC. The inset shows the simulated light field distribution of the 3D PMC HTL/Au at 668 nm and the enhanced optical transmission due to the hole. d SEM and AFM images of the grating and moth-eye patterned PCBM layers. e J–V curves of the flat, grating, and moth-eye patterned PSCs. Adapted with permission138. Copyright 2017, Wiley. The performance (Jsc and PCE) of the PSCs are improved by plasmonic films due to the great enhancement in light absorption, which is attributed to the excitation of the diverse plasmonic and photonic modes, including dipole-like LSPR, SPP modes, Bloch modes, cavity modes, and their mutual couplings.CC BY · PubMed Central
Fig. 6 Plasmonic–perovskite light emitters with enhanced spontaneous emission. a TEM image of a cross-section, the corresponding schematic diagram, and the photographic image of the plasmonic–perovskite LED based on the Ag-CsPbBr3 system. Adapted with permission140. Copyright 2017, ACS. b PL lifetime of the perovskite CsPbBr3 nanocrystal layer with and without Ag rods. c PL intensity and (d) fitted time-resolved photoluminescence decay spectra of CsPbClxBr3−x@Ag hybrid nanocrystals obtained by reacting CsPbBr3 nanocrystals with AgCl for 0–24 h. The inset in (c) shows photographs of the CsPbBr3 nanocrystals and CsPbClxBr3−x@Ag hybrid nanocrystals at a reaction time of 24 h under 365 nm UV light irradiation. The enhancement is mainly attributed to the enhanced absorbance of UV or blue light by the Ag-induced plasmonic near-field effect. Adapted with permission142. Copyright 2017, RSC. e Left image: schematic of the Au/p-NiO/CsPbBr3 QD/MgZnO/Au NP/n-ZnO/n+-GaN heterostructure LED. Right image: cross-sectional SEM image of the NiO/CsPbBr3 QD/MgZnO/Au NP/ZnO coaxial NWs. (f) EL spectra of the plasmonic PeLED with Au NP decoration and the reference device without Au NPs captured at 8.0 V. The insets present the corresponding emission photographs of an emitting unit (2 × 2 mm2). The electroluminescence enhancement is associated with the increased spontaneous emission rate and improved internal QY induced by exciton–LSPR coupling. Adapted with permission150. Copyright 2018, Wiley.
Fig. 6 Plasmonic–perovskite light emitters with enhanced spontaneous emission. a TEM image of a cross-section, the corresponding schematic diagram, and the photographic image of the plasmonic–perovskite LED based on the Ag-CsPbBr3 system. Adapted with permission140. Copyright 2017, ACS. b PL lifetime of the perovskite CsPbBr3 nanocrystal layer with and without Ag rods. c PL intensity and (d) fitted time-resolved photoluminescence decay spectra of CsPbClxBr3−x@Ag hybrid nanocrystals obtained by reacting CsPbBr3 nanocrystals with AgCl for 0–24 h. The inset in (c) shows photographs of the CsPbBr3 nanocrystals and CsPbClxBr3−x@Ag hybrid nanocrystals at a reaction time of 24 h under 365 nm UV light irradiation. The enhancement is mainly attributed to the enhanced absorbance of UV or blue light by the Ag-induced plasmonic near-field effect. Adapted with permission142. Copyright 2017, RSC. e Left image: schematic of the Au/p-NiO/CsPbBr3 QD/MgZnO/Au NP/n-ZnO/n+-GaN heterostructure LED. Right image: cross-sectional SEM image of the NiO/CsPbBr3 QD/MgZnO/Au NP/ZnO coaxial NWs. (f) EL spectra of the plasmonic PeLED with Au NP decoration and the reference device without Au NPs captured at 8.0 V. The insets present the corresponding emission photographs of an emitting unit (2 × 2 mm2). The electroluminescence enhancement is associated with the increased spontaneous emission rate and improved internal QY induced by exciton–LSPR coupling. Adapted with permission150. Copyright 2018, Wiley.CC BY · PubMed Central
Fig. 7 Plasmonic–perovskite lasers. a Schematic of a spaser (surface plasmon amplification by stimulated emission of radiation) composed of a MAPbI3 NP/SiO2/Ag plasmonic laser. Inset: SEM image of perovskite NPs lying on Au/SiO2 microdisks. In contrast to previous reports, here, the spasers are determined by the boundary of Au patterns instead of the crystal facets of MAPbX3 nanosheets. As a result, whispering gallery mode-based circular spasers and spaser arrays are successfully realized by patterning the Au substrate into circles and gratings, respectively. b Lasing threshold of plasmonic and photonic lasers versus perovskite thickness; the solid lines are used for guidance. Only the hybrid plasmonic mode exists below a perovskite thickness of 40 nm. Adapted with permission154. Copyright 2018, ACS. c SEM image of a perovskite/Ag heterostructure. Insets: AFM image and corresponding cross-sectional profiles of a typical heterostructure. The perovskite crystals can serve as both the gain medium and the optical resonant cavity for low-threshold lasing. Adapted with permission155. Copyright 2016, ACS. d Schematic layer structure of the perovskites capped with a dielectric PMMA spacer and a Ag thin film. Not only can perovskite be protected from hydrolysis but also the lasing thresholds can be greatly reduced due to the plasmonic effect. Adapted with permission161. Copyright 2016, OSA. e Schematic of a hybrid plasmonic microcavity structure. A MAPbBr3 nanowire sits on a SiO2/Ag substrate (∼ 50 ± 1 nm) with a spacer layer of SiO2 (dG ≈ 5 − 20 ± 1 nm). The exciton–photon coupling strength is enhanced by ~35% on average, which is mainly attributed to surface plasmon-induced localized excitation field redistribution. f Time-resolved PL spectra of MAPbBr3 NWs sitting on glass and SiO2/Ag substrates with SiO2 thicknesses of 20, 10, and 5 nm. Adapted with permission162. Copyright 2018, ACS.
Fig. 7 Plasmonic–perovskite lasers. a Schematic of a spaser (surface plasmon amplification by stimulated emission of radiation) composed of a MAPbI3 NP/SiO2/Ag plasmonic laser. Inset: SEM image of perovskite NPs lying on Au/SiO2 microdisks. In contrast to previous reports, here, the spasers are determined by the boundary of Au patterns instead of the crystal facets of MAPbX3 nanosheets. As a result, whispering gallery mode-based circular spasers and spaser arrays are successfully realized by patterning the Au substrate into circles and gratings, respectively. b Lasing threshold of plasmonic and photonic lasers versus perovskite thickness; the solid lines are used for guidance. Only the hybrid plasmonic mode exists below a perovskite thickness of 40 nm. Adapted with permission154. Copyright 2018, ACS. c SEM image of a perovskite/Ag heterostructure. Insets: AFM image and corresponding cross-sectional profiles of a typical heterostructure. The perovskite crystals can serve as both the gain medium and the optical resonant cavity for low-threshold lasing. Adapted with permission155. Copyright 2016, ACS. d Schematic layer structure of the perovskites capped with a dielectric PMMA spacer and a Ag thin film. Not only can perovskite be protected from hydrolysis but also the lasing thresholds can be greatly reduced due to the plasmonic effect. Adapted with permission161. Copyright 2016, OSA. e Schematic of a hybrid plasmonic microcavity structure. A MAPbBr3 nanowire sits on a SiO2/Ag substrate (∼ 50 ± 1 nm) with a spacer layer of SiO2 (dG ≈ 5 − 20 ± 1 nm). The exciton–photon coupling strength is enhanced by ~35% on average, which is mainly attributed to surface plasmon-induced localized excitation field redistribution. f Time-resolved PL spectra of MAPbBr3 NWs sitting on glass and SiO2/Ag substrates with SiO2 thicknesses of 20, 10, and 5 nm. Adapted with permission162. Copyright 2018, ACS.CC BY · PubMed Central
Fig. 8 Plasmonic–perovskite photodetectors. a–d Organic-inorganic hybrid perovskite PD on arrays of Au nanostructures. The maximum EQE of this PD is as high as approximately 65%, 2.5 times that on a usual Si/SiO2 substrate without Au nanostructures, which is due to the large, localized E-field induced by the SPR. a Schematic of the device on a plasmonic substrate. b SEM images of the plasmonic substrate. c The dependence of the photocurrent on the incident laser power for the device on Si/SiO2 and plasmonic substrates at zero bias. d EQE of devices on Si/SiO2 and plasmonic substrates. Adapted with permission168. Copyright 2019, Wiley. e, f Graphene/MAPbI3 hybrid PDs integrated with Au NPs. e Schematic of the Au NP/graphene/CH3NH3PbI3 hybrid PDs. f Responsivities versus light intensity at different VDS biases. The dependencies of the responsivities on the light intensity are fitted with power functions with the listed fitting parameters. Compared with pristine graphene-MAPbI3 devices, this device has two times higher photoresponsivity and a faster photoresponse speed. This enhancement can be attributed to the improved light absorption in the perovskite layer due to the plasmonic effect of the Au NPs. Adapted with permission170. Copyright 2016, RSC. g, h CsPbCl3/Ag/OPC hybrid PDs. (g) Schematic of CsPbCl3 on Ag/OPC PDs. h On-off switching properties measured under 365 nm light illumination (10 mW/cm2) at a bias of 3 V. The photocurrent of CsPbCl3 PD with Ag/OPC is 682% higher than that of CsPbCl3 PD without Ag/OPC. Adapted with permission176. Copyright 2018, Wiley.
Fig. 8 Plasmonic–perovskite photodetectors. a–d Organic-inorganic hybrid perovskite PD on arrays of Au nanostructures. The maximum EQE of this PD is as high as approximately 65%, 2.5 times that on a usual Si/SiO2 substrate without Au nanostructures, which is due to the large, localized E-field induced by the SPR. a Schematic of the device on a plasmonic substrate. b SEM images of the plasmonic substrate. c The dependence of the photocurrent on the incident laser power for the device on Si/SiO2 and plasmonic substrates at zero bias. d EQE of devices on Si/SiO2 and plasmonic substrates. Adapted with permission168. Copyright 2019, Wiley. e, f Graphene/MAPbI3 hybrid PDs integrated with Au NPs. e Schematic of the Au NP/graphene/CH3NH3PbI3 hybrid PDs. f Responsivities versus light intensity at different VDS biases. The dependencies of the responsivities on the light intensity are fitted with power functions with the listed fitting parameters. Compared with pristine graphene-MAPbI3 devices, this device has two times higher photoresponsivity and a faster photoresponse speed. This enhancement can be attributed to the improved light absorption in the perovskite layer due to the plasmonic effect of the Au NPs. Adapted with permission170. Copyright 2016, RSC. g, h CsPbCl3/Ag/OPC hybrid PDs. (g) Schematic of CsPbCl3 on Ag/OPC PDs. h On-off switching properties measured under 365 nm light illumination (10 mW/cm2) at a bias of 3 V. The photocurrent of CsPbCl3 PD with Ag/OPC is 682% higher than that of CsPbCl3 PD without Ag/OPC. Adapted with permission176. Copyright 2018, Wiley.CC BY · PubMed Central
Fig. 9 Plasmonic–perovskite optical sensors. a, b Superficial-layer-enhanced Raman scattering (SLERS) technique based on covering elongated tetrahexahedral (ETHH) Au NP arrays with a CH3NH3PbBr3 film. Noninteracting analytes, such as benzo[α]pyrene (BαP) that has chronic toxicity and can easily adhere to human skin or muscles to cause carcinogenesis, is detected. a Cross-sectional SEM images of the perovskite film on ETHH NP arrays. b Raman spectra of BαP in four different models without (Model 1 and Model 2) and with (Model 3 and Model 4) the perovskite. BαP is segregated from the ETHH arrays by n-alkyl thiols in Model 2 and Model 4. The Raman signals are significantly enhanced with the perovskite because the perovskite film, as a dielectric medium, slows the attenuation of the electromagnetic evanescent wave and the LSPR decay is suppressed along the vertical direction away from the nanostructured surface. Adapted with permission178. Copyright 2019, Wiley. c Optical phase and GH shift as a function of the angle of incidence near the SPP resonance angle of 54.36°. The sensing substrate consists of a bilayer FAPbI3 on a 45-nm silver thin film. d Simulations showing that a plasmonic sensor based on graphene/FAPbI3/hBN/Ag can detect small refractive index changes on the order of 10–8 RIU, which is 4 orders of magnitude more sensitive than plasmonic sensors based on a simple Au substrate. The presence of 2D perovskite layers of a suitable thickness can lead to deeper SPP resonance dips, which correspond to a sharper optical phase change and a larger GH shift. e Simulated angular reflectance spectra for a device consisting of bilayer FAPbI3 on silver nanogrooves with various groove widths. The insets show that the enhanced near fields lead to deeper spectral dips. Adapted with permission214. Copyright 2020, MPDI.
Fig. 9 Plasmonic–perovskite optical sensors. a, b Superficial-layer-enhanced Raman scattering (SLERS) technique based on covering elongated tetrahexahedral (ETHH) Au NP arrays with a CH3NH3PbBr3 film. Noninteracting analytes, such as benzo[α]pyrene (BαP) that has chronic toxicity and can easily adhere to human skin or muscles to cause carcinogenesis, is detected. a Cross-sectional SEM images of the perovskite film on ETHH NP arrays. b Raman spectra of BαP in four different models without (Model 1 and Model 2) and with (Model 3 and Model 4) the perovskite. BαP is segregated from the ETHH arrays by n-alkyl thiols in Model 2 and Model 4. The Raman signals are significantly enhanced with the perovskite because the perovskite film, as a dielectric medium, slows the attenuation of the electromagnetic evanescent wave and the LSPR decay is suppressed along the vertical direction away from the nanostructured surface. Adapted with permission178. Copyright 2019, Wiley. c Optical phase and GH shift as a function of the angle of incidence near the SPP resonance angle of 54.36°. The sensing substrate consists of a bilayer FAPbI3 on a 45-nm silver thin film. d Simulations showing that a plasmonic sensor based on graphene/FAPbI3/hBN/Ag can detect small refractive index changes on the order of 10–8 RIU, which is 4 orders of magnitude more sensitive than plasmonic sensors based on a simple Au substrate. The presence of 2D perovskite layers of a suitable thickness can lead to deeper SPP resonance dips, which correspond to a sharper optical phase change and a larger GH shift. e Simulated angular reflectance spectra for a device consisting of bilayer FAPbI3 on silver nanogrooves with various groove widths. The insets show that the enhanced near fields lead to deeper spectral dips. Adapted with permission214. Copyright 2020, MPDI.CC BY · PubMed Central
Fig. 10 Plasmonic perovskite for driving chemical reactions and the photoinduced modulation of THz resonances. a Schematic of the proposed perovskite NC/AlOx/Ag NC antenna for driving chemical reactions by coupling them to plasmonic Ag NCs, where CsPbBr3 NCs are used as light-harvesting energy-transfer donors, while Ag NCs are employed as acceptors and catalysts. A directional funneling of energy from the perovskite toward the silver is established to drive dye desorption. b Representative photochemical reaction experiment showing the decrease in the Raman signal of the PeNC/AlOx (3 nm)/Ag-MB sample under illumination. The decrease in the Raman signals points to the desorption of MB dye from the Ag NC surface induced by plasmon excitation through energy transfer from the PeNCs. Adapted with permission181. Copyright 2019, ACS. c, d Photoinduced modulation of the THz plasmonic resonances by spin coating an MAPbI3 perovskite on top of metallic hole arrays, which in turn are fabricated on a silicon substrate. c Schematic diagram of the device composed of a 2D perovskite thin film/Al nanohole array/high-resistivity silicon substrate. d Transmission spectrum of the nanohole array demonstrating negligible attenuation for the n = 1 perovskite/Si sample when excited with a 700 nm long-pass filter (i.e., no excitons are generated). e–g Optical excitation-induced attenuation of the transmitted THz transmission through the Al nanohole array. These arrays were excited using 500 nm long-pass, 600 nm long-pass, and 700 nm long-pass filters. The optical excitation range is shown above each spectrum. Nearly 100% attenuation of the plasmonic resonances is achieved as the lamp flux is increased (the arrow direction corresponds to increasing lamp flux). Adapted with permission182. Copyright 2017, Springer Nature.
Fig. 10 Plasmonic perovskite for driving chemical reactions and the photoinduced modulation of THz resonances. a Schematic of the proposed perovskite NC/AlOx/Ag NC antenna for driving chemical reactions by coupling them to plasmonic Ag NCs, where CsPbBr3 NCs are used as light-harvesting energy-transfer donors, while Ag NCs are employed as acceptors and catalysts. A directional funneling of energy from the perovskite toward the silver is established to drive dye desorption. b Representative photochemical reaction experiment showing the decrease in the Raman signal of the PeNC/AlOx (3 nm)/Ag-MB sample under illumination. The decrease in the Raman signals points to the desorption of MB dye from the Ag NC surface induced by plasmon excitation through energy transfer from the PeNCs. Adapted with permission181. Copyright 2019, ACS. c, d Photoinduced modulation of the THz plasmonic resonances by spin coating an MAPbI3 perovskite on top of metallic hole arrays, which in turn are fabricated on a silicon substrate. c Schematic diagram of the device composed of a 2D perovskite thin film/Al nanohole array/high-resistivity silicon substrate. d Transmission spectrum of the nanohole array demonstrating negligible attenuation for the n = 1 perovskite/Si sample when excited with a 700 nm long-pass filter (i.e., no excitons are generated). e–g Optical excitation-induced attenuation of the transmitted THz transmission through the Al nanohole array. These arrays were excited using 500 nm long-pass, 600 nm long-pass, and 700 nm long-pass filters. The optical excitation range is shown above each spectrum. Nearly 100% attenuation of the plasmonic resonances is achieved as the lamp flux is increased (the arrow direction corresponds to increasing lamp flux). Adapted with permission182. Copyright 2017, Springer Nature.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 210 references

Research works printed but not linked: 3

  1. Jia, Y., Kerner, R. A., Grede, A. J., Rand, B. P. & Giebink, N. C. Continuous-wave lasing in an organic–inorganic lead halide perovskite semiconductor. Nat. Photonics 11, 784–788 (2017). · DOI · Paper page
  2. Abdelraouf, O. A. M., Shaker, A. & Allam, N. K. All dielectric and plasmonic cross-grating metasurface for efficient perovskite solar cells. Metamaterials Xi 10671, 1067120 (2018).
  3. Zhang, W. et al. Enhancement of perovskite-based solar cells employing core-shell metal nanoparticles. Nano Lett. 13, 4505–4510 (2013). · DOI · Paper page

Cited by

See all 172

Metadata

Authors
Ai, B., Fan, Z., & Wong, Z. J.
Affiliations
  • Chongqing University (CN)
  • Texas A&M University (US)
Corresponding author
Wong, Zi Jing
ORCID
Ai, Bin
Venue
Microsystems & Nanoengineering
Published
2022-01-12
Volume
8
Issue
1
Pages
5-5
ISSN
2055-7434 (ISSN-L)
OpenAlex
W4206044362
Cited by
172
References
210
Citations by year
2026: 28 · 2025: 57 · 2024: 48 · 2023: 22 · 2022: 17
FWCI
3.21
Type
journal article
Language
en
Open access
Licence
Locations
  • Microsystems & Nanoengineering (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Chongqing University
  • Natural Science Foundation of Chongqing (cstc2020jcyj-msxmX0614, cstc2020jcyj)
  • Fundamental Research Funds for the Central Universities (2021CDJQY-010)
Topics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Plasmonic and Surface Plasmon Research
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Gold and Silver Nanoparticles Synthesis and Applications
Keywords
plasmonic sensors, plasmonic lasers, plasmonic photodetectors, plasmonic nanostructures, optoelectronic devices

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Plasmonic–perovskite solar cells, light emitters, and sensors. https://app.cochat.ai/papers/10.1038/s41378-021-00334-2
The paper
Ai, B., Fan, Z., & Wong, Z. J. (2022). Plasmonic–perovskite solar cells, light emitters, and sensors. Microsystems & Nanoengineering. https://doi.org/10.1038/s41378-021-00334-2

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.