The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes
Open accessAbstract
This work describes silicon nanoparticle-based lithium-ion battery negative electrodes where multiple nonactive electrode additives (usually carbon black and an inert polymer binder) are replaced with a single conductive binder, in this case, the conducting polymer PEDOT: PSS. While enabling the production of well-mixed slurry-cast electrodes with high silicon content (up to 95 wt %), this combination eliminates the well-known occurrence of capacity losses due to physical separation of the silicon and traditional inorganic conductive additives during repeated lithiation/delithiation processes. Using an in situ secondary doping treatment of the PEDOT: PSS with small quantities of formic acid, electrodes containing 80 wt % SiNPs can be prepared with electrical conductivity as high as 4.2 S/cm. Even at the relatively high areal loading of 1 mg/cm(2), this system demonstrated a first cycle lithiation capacity of 3685 mA·h/g (based on the SiNP mass) and a first cycle efficiency of ∼78%. After 100 repeated cycles at 1 A/g this electrode was still able to store an impressive 1950 mA·h/g normalized to Si mass (∼75% capacity retention), corresponding to 1542 mA·h/g when the capacity is normalized by the total electrode mass. At the maximum electrode thickness studied (∼1.5 mg/cm(2)), a high areal capacity of 3 mA·h/cm(2) was achieved. Importantly, these electrodes are based on commercially available components and are produced by the standard slurry coating methods required for large-scale electrode production. Hence, the results presented here are highly relevant for the realization of commercial LiB negative electrodes that surpass the performance of current graphite-based negative electrode systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials
Coleman, J. N., Lotya, M., O’Neill, A., Bergin, S. D., King, P. J., Khan, U., Young, K., Gaucher, A., De, S., Smith, R. J., et al. (2011) · Science · doi:10.1126/science.1194975 · Cited by 7,242
Self-citationHigh-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Introduction to Percolation Theory
Stauffer, D., Aharony, A., & Redner, S. (1993) · Physics Today · doi:10.1063/1.2808877 · Cited by 6,666
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Poly(3,4-ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future
Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., & Reynolds, J. R. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200004)12:7<481::aid-adma481>3.0.co;2-c · Cited by 3,420
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes
Liu, N., Lu, Z., Zhao, J., McDowell, M. T., Lee, H.-W., Zhao, W., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.6 · Cited by 2,491
Wu, H., Chan, G., Choi, J. W., Ryu, I., Yao, Y., McDowell, M. T., Lee, S. W., Jackson, A., Yang, Y., Hu, L., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.35 · Cited by 2,478
Size-Dependent Fracture of Silicon Nanoparticles During Lithiation
Liu, X. H., Zhong, L., Huang, S., Mao, S. X., Zhu, T., & Huang, J. Y. (2012) · ACS Nano · doi:10.1021/nn204476h · Cited by 2,376
Cited by
Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical Applications
Feng, K., Li, M., Liu, W., Kashkooli, A. G., Xiao, X., Cai, M., & Chen, Z. (2018) · Small · doi:10.1002/smll.201702737 · Cited by 1,042
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
The emerging era of supramolecular polymeric binders in silicon anodes
Kwon, T.-W., Choi, J. W., & Coskun, A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00858a · Cited by 560
Surface and Interface Engineering of Silicon‐Based Anode Materials for Lithium‐Ion Batteries
Luo, W., Chen, X., Xia, Y., Chen, M., Wang, L., Wang, Q., Li, W., & Yang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701083 · Cited by 549
Redox-Active Polymers for Energy Storage Nanoarchitectonics
Kim, J., Kim, J. H., & Ariga, K. (2017) · Joule · doi:10.1016/j.joule.2017.08.018 · Cited by 549
Recent Advances in Silicon‐Based Electrodes: From Fundamental Research toward Practical Applications
Ge, M., Cao, C., Biesold, G. M., Sewell, C. D., Hao, S., Huang, J., Zhang, W., Lai, Y., & Lin, Z. (2021) · Advanced Materials · doi:10.1002/adma.202004577 · Cited by 524
Nanostructured Anode Materials for Lithium Ion Batteries: Progress, Challenge and Perspective
Mahmood, N., Tang, T., & Hou, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600374 · Cited by 514
Recent progress on silicon-based anode materials for practical lithium-ion battery applications
Li, P., Zhao, G., Zheng, X., Xu, X., Yao, C., Sun, W., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.07.014 · Cited by 480
High areal capacity battery electrodes enabled by segregated nanotube networks
Park, S.-H., King, P. J., Tian, R., Boland, C. S., Coelho, J., Zhang, C., McBean, P., McEvoy, N., Kremer, M. P., Daly, D., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0398-y · Cited by 477
Self-citationA Review of the Design of Advanced Binders for High‐Performance Batteries
Zou, F., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002508 · Cited by 465
Graphene and MXene-based transparent conductive electrodes and supercapacitors
Zhang, C. (., & Nicolosi, V. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.003 · Cited by 461
Self-citationRecent advancement of SiOx based anodes for lithium-ion batteries
Chen, T., Wu, J., Zhang, Q., & Su, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.073 · Cited by 427
Li, Z., Zhang, Y., Liu, T., Gao, X., Li, S., Ling, M., Liang, C., Zheng, J., & Lin, Z. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903110 · Cited by 404
Zeng, W., Wang, L., Peng, X., Liu, T., Jiang, Y., Qin, F., Hu, L., Chu, P. K., Huo, K., & Zhou, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702314 · Cited by 389
Conductive polymers for next-generation energy storage systems: recent progress and new functions
Kim, J., Lee, J., You, J., Park, M.-S., Hossain, M. S. A., Yamauchi, Y., & Kim, J. H. (2016) · Materials Horizons · doi:10.1039/c6mh00165c · Cited by 378
High capacity silicon anodes enabled by MXene viscous aqueous ink
Zhang, C., Park, S.-H., Seral‐Ascaso, A., Barwich, S., McEvoy, N., Boland, C. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2019) · Nature Communications · doi:10.1038/s41467-019-08383-y · Cited by 365
Self-citationPolymers in Lithium‐Ion and Lithium Metal Batteries
Li, J., Cai, Y., Wu, H., Yu, Z., Yan, X., Zhang, Q., Gao, T. Z., Liu, K., Jia, X., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003239 · Cited by 348
Biomass-based materials for green lithium secondary batteries
Jin, C., Nai, J., Sheng, O., Yuan, H., Zhang, W., Tao, X., & Lou, X. W. (. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02848g · Cited by 324
Advances of polymer binders for silicon‐based anodes in high energy density lithium‐ion batteries
Zhao, Y., Yue, F., Li, S., Zhang, Y., Tian, Z., Xu, Q., Xin, S., & Guo, Y. (2021) · InfoMat · doi:10.1002/inf2.12185 · Cited by 318
Two-dimensional transition metal dichalcogenides in supercapacitors and secondary batteries
Lin, L., Lei, W., Zhang, S., Liu, Y., Wallace, G. G., & Chen, J. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.023 · Cited by 294
High-Mass-Loading Electrodes for Advanced Secondary Batteries and Supercapacitors
Wu, F., Liu, M., Li, Y., Feng, X., Zhang, K., Bai, Y., Wang, X., & Wu, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00093-0 · Cited by 288
Liu, Y., He, X., Hanlon, D., Harvey, A., Coleman, J. N., & Li, Y. (2016) · ACS Nano · doi:10.1021/acsnano.6b04577 · Cited by 285
Self-citationSilicon Anode Design for Lithium-Ion Batteries: Progress and Perspectives
Franco Gonzalez, A., Yang, N.-H., & Liu, R.-S. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b07793 · Cited by 284
Eshetu, G. G., & Figgemeier, E. (2019) · ChemSusChem · doi:10.1002/cssc.201900209 · Cited by 273
Zhang, G., Yang, Y., Chen, Y., Huang, J., Zhang, T., Zeng, H., Wang, C., Liu, G., & Deng, Y. (2018) · Small · doi:10.1002/smll.201801189 · Cited by 263
Fu, Y., Wei, Q., Zhang, G., & Sun, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702849 · Cited by 260
Fu, H., & Yeatman, E. M. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.04.043 · Cited by 260
Du, F., Tang, H., Pan, L., Zhang, T., Lu, H., Xiong, J., Yang, J., & Zhang, C. (. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.03.153 · Cited by 255
Self-citation
Metadata
- Authors
- Higgins, T. M., Park, S.-H., King, P. J., Zhang, C. (., McEvoy, N., Berner, N. C., Daly, D., Shmeliov, A., Khan, U., Duesberg, G., Nicolosi, V., & Coleman, J. N.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-08
- Volume
- 10
- Issue
- 3
- Pages
- 3702-3713
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2292819900
- Cited by
- 481
- References
- 47
- FWCI
- 32.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.