The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Flexible Integrated System Containing a Microsupercapacitor, a Photodetector, and a Wireless Charging Coil
Abstract
Nowadays, the integrated systems on a plane substrate containing energy harvesting, energy storing, and working units are strongly desired with the fast development of wearable and portable devices. Here, a simple, low cost, and scalable strategy involving ink printing and electrochemical deposition is proposed to fabricate a flexible integrated system on a plane substrate containing an all-solid-state asymmetric microsupercapacitor (MSC), a photoconduct-type photodetector of perovskite nanowires (NWs), and a wireless charging coil. In the asymmetric MSCs, MnO 2 -PPy and V 2 O 5 -PANI composites are used as positive and negative electrodes, respectively. Typical values of energy density in the range of 15–20 mWh cm –3 at power densities of 0.3–2.5 W cm –3 with an operation potential window of 1.6 V are achieved. In the system, the wireless charging coil receives energy from a wireless power transmitter, which then can be stored in the MSC to drive the photoconductive detector of perovskite NWs in sequence. The designed integrated system exhibits a stable photocurrent response comparable with the detector driven by an external power source. This research provides an important routine to fabricate integrated systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanotechnology‐Enabled Energy Harvesting for Self‐Powered Micro‐/Nanosystems
Wang, Z. L., & Wu, W. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201656 · Cited by 1,063
Cited by
Yang, J. C., Mun, J., Kwon, S. Y., Park, S., Bao, Z., & Park, S. (2019) · Advanced Materials · doi:10.1002/adma.201904765 · Cited by 1,641
3D Synergistical MXene/Reduced Graphene Oxide Aerogel for a Piezoresistive Sensor
Ma, Y., Yue, Y., Zhang, H., Cheng, F., Zhao, W., Rao, J., Luo, S., Wang, J., Jiang, X., Liu, Z., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b06909 · Cited by 857
Self-citationHighly Self-Healable 3D Microsupercapacitor with MXene–Graphene Composite Aerogel
Yue, Y., Liu, N., Ma, Y., Wang, S., Liu, W., Luo, C., Zhang, H., Cheng, F., Rao, J., Hu, X., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07528 · Cited by 736
Self-citation3D hybrid porous Mxene-sponge network and its application in piezoresistive sensor
Yue, Y., Liu, N., Liu, W., Li, M., Ma, Y., Luo, C., Wang, S., Rao, J., Hu, X., Su, J., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.020 · Cited by 576
Self-citationMXene-Bonded Activated Carbon as a Flexible Electrode for High-Performance Supercapacitors
Yu, L., Hu, L., Anasori, B., Liu, Y.-T., Zhu, Q., Zhang, P., Gogotsi, Y., & Xu, B. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00718 · Cited by 533
Metadata
- Authors
- Yue, Y., Yang, Z., Liu, N., Liu, W., Zhang, H., Ma, Y., Yang, C., Su, J., Li, L., Long, F., Zou, Z., & Gao, Y.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-11-16
- Volume
- 10
- Issue
- 12
- Pages
- 11249-11257
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2554630561
- Cited by
- 187
- References
- 1
- FWCI
- 9.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Flexible Integrated System Containing a Microsupercapacitor, a Photodetector, and a Wireless Charging Coil. https://app.cochat.ai/papers/10.1021/acsnano.6b06326
- The paper
- Yue, Y., Yang, Z., Liu, N., Liu, W., Zhang, H., Ma, Y., Yang, C., Su, J., Li, L., Long, F., Zou, Z., & Gao, Y. (2016). A Flexible Integrated System Containing a Microsupercapacitor, a Photodetector, and a Wireless Charging Coil. ACS Nano. https://doi.org/10.1021/acsnano.6b06326
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.