The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing
Open accessAbstract
A simple full-inkjet-printing technique is developed for the scalable fabrication of graphene-based microsupercapacitors (MSCs) on various substrates. High-performance graphene inks are formulated by integrating the electrochemically exfoliated graphene with a solvent exchange technique to reliably print graphene interdigitated electrodes with tunable geometry and thickness. Along with the printed polyelectrolyte, poly(4-styrenesulfonic acid), the fully printed graphene-based MSCs attain the highest areal capacitance of ∼0.7 mF/cm 2, substantially advancing the state-of-art of all-solid-state MSCs with printed graphene electrodes. The full printing solution enables scalable fabrication of MSCs and effective connection of them in parallel and/or in series at various scales. Remarkably, more than 100 devices have been connected to form large-scale MSC arrays as power banks on both silicon wafers and Kapton. Without any extra protection or encapsulation, the MSC arrays can be reliably charged up to 12 V and retain the performance even 8 months after fabrication.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical methods for the production of graphenes
Park, S., & Ruoff, R. S. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.58 · Cited by 6,663
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
Liquid Exfoliation of Layered Materials
Nicolosi, V., Chhowalla, M., Kanatzidis, M. G., Strano, M. S., & Coleman, J. N. (2013) · Science · doi:10.1126/science.1226419 · Cited by 3,796
Ultrahigh-power micrometre-sized supercapacitors based on onion-like carbon
Pech, D., Brunet, M., Durou, H., Huang, P., Mochalin, V., Gogotsi, Y., Taberna, P.-L., & Simon, P. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.162 · Cited by 2,721
Paton, K. R., Varrla, E., Backes, C., Smith, R. J., Khan, U., O’Neill, A., Boland, C., Lotya, M., Istrate, O. M., King, P., et al. (2014) · Nature Materials · doi:10.1038/nmat3944 · Cited by 2,401
Nanoporous metal/oxide hybrid electrodes for electrochemical supercapacitors
Lang, X., Hirata, A., Fujita, T., & Chen, M. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.13 · Cited by 2,109
El-Kady, M. F., & Kaner, R. B. (2013) · Nature Communications · doi:10.1038/ncomms2446 · Cited by 1,868
Marangoni Effect Reverses Coffee-Ring Depositions
Hu, H., & Larson, R. G. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0609232 · Cited by 1,645
Direct laser writing of micro-supercapacitors on hydrated graphite oxide films
Gao, W., Singh, N., Song, L., Liu, Z., Reddy, A. L. M., Ci, L., Vajtai, R., Zhang, Q., Wei, B., & Ajayan, P. M. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.110 · Cited by 1,461
Exfoliation of Graphite into Graphene in Aqueous Solutions of Inorganic Salts
Parvez, K., Wu, Z.-S., Li, R., Liu, X., Graf, R., Feng, X., & Müllen, K. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5017156 · Cited by 1,440
Self-citation
Cited by
Energy storage: The future enabled by nanomaterials
Pomerantseva, E., Bonaccorso, F., Feng, X., Cui, Y., & Gogotsi, Y. (2019) · Science · doi:10.1126/science.aan8285 · Cited by 1,927
Self-citationA review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
3D Printing of Multilayered and Multimaterial Electronics: A Review
Goh, G. L., Zhang, H., Chong, T. H., & Yeong, W. Y. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100445 · Cited by 319
Tran, T. S., Dutta, N. K., & Choudhury, N. R. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.09.003 · Cited by 298
Engineering 2D Architectures toward High‐Performance Micro‐Supercapacitors
Da, Y., Liu, J., Zhou, L., Zhu, X., Chen, X., & Fu, L. (2019) · Advanced Materials · doi:10.1002/adma.201802793 · Cited by 253
Metadata
- Authors
- Li, J., Sollami Delekta, S., Zhang, P., Yang, S., Lohe, M. R., Zhuang, X., Feng, X., & Östling, M.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-07-17
- Volume
- 11
- Issue
- 8
- Pages
- 8249-8256
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2733643322
- Cited by
- 334
- References
- 32
- FWCI
- 12.01
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing. https://app.cochat.ai/papers/10.1021/acsnano.7b03354
- The paper
- Li, J., Sollami Delekta, S., Zhang, P., Yang, S., Lohe, M. R., Zhuang, X., Feng, X., & Östling, M. (2017). Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing. ACS Nano. https://doi.org/10.1021/acsnano.7b03354
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
