The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Assembly of Hollow Carbon Nanospheres on Graphene Nanosheets and Creation of Iron–Nitrogen-Doped Porous Carbon for Oxygen Reduction
Abstract
Triblock copolymer micelles coated with melamine-formaldehyde resin were self-assembled into closely packed two-dimensional (2D) arrangements on the surface of graphene oxide sheets. Carbonizing these structures created a 2D architecture composed of reduced graphene oxide (rGO) sandwiched between two monolayers of sub-40 nm diameter hollow nitrogen-doped carbon nanospheres (N-HCNS). Electrochemical tests showed that these hybrid structures had better performance for oxygen reduction compared to physically mixed rGO and N-HCNS that were not chemically bonded together. Further impregnation of the sandwich structures with iron (Fe) species followed by carbonization yielded Fe 1.6 -N-HCNS/rGO-900 with a high specific surface area (968.3 m 2 g –1 ), a high nitrogen doping (6.5 at%), and uniformly distributed Fe dopant (1.6 wt %). X-ray absorption fine structure analyses showed that most of the Fe in the nitrogen-doped carbon framework is composed of single Fe atoms each coordinated to four N atoms. The best Fe 1.6 -N-HCNS/rGO-900 catalyst performed better in electrocatalytic oxygen reduction than 20 wt % Pt/C catalyst in alkaline medium, with a more positive half-wave potential of 0.872 V and the same limiting current density. Bottom-up soft-patterning of regular carbon arrays on free-standing 2D surfaces should enable conductive carbon supports that boost the performance of electrocatalytic active sites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Guo, D., Shibuya, R., Akiba, C., Saji, S., Kondo, T., & Nakamura, J. (2016) · Science · doi:10.1126/science.aad0832 · Cited by 4,230
Lai, L., Potts, J. R., Zhan, D., Wang, L., Poh, C. K., Tang, C., Gong, H., Shen, Z., Lin, J., & Ruoff, R. S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21802j · Cited by 2,277
Chen, Y., Ji, S., Wang, Y., Dong, J., Chen, W., Li, Z., Shen, R., Zheng, L., Zhuang, Z., Wang, D., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702473 · Cited by 1,988
Self-citationMesoporous carbon materials: Synthesis and modification
Liang, C., Li, Z., & Dai, S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702046 · Cited by 1,935
Jiang, W.-J., Gu, L., Li, L., Zhang, Y., Zhang, X., Zhang, L.-J., Wang, J.-Q., Hu, J.-S., Wei, Z., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00757 · Cited by 1,765
Self-citationAn oxygen reduction electrocatalyst based on carbon nanotube–graphene complexes
Li, Y., Zhou, W., Wang, H., Xie, L., Liang, Y., Wei, F., Idrobo, J.-C., Pennycook, S. J., & Dai, H. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.72 · Cited by 1,618
Self-citationIron Encapsulated within Pod‐like Carbon Nanotubes for Oxygen Reduction Reaction
Deng, D., Yu, L., Chen, X., Wang, G., Jin, L., Pan, X., Deng, J., Sun, G., & Bao, X. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201204958 · Cited by 1,320
Chen, P., Zhou, T., Xing, L., Xu, K., Tong, Y., Xie, H., Zhang, L., Yan, W., Chu, W., Wu, C., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201610119 · Cited by 1,085
Yang, X., Zhu, J., Qiu, L., & Li, D. (2011) · Advanced Materials · doi:10.1002/adma.201100261 · Cited by 1,030
Cited by
Mun, Y., Lee, S., Kim, K., Kim, S., Lee, S., Han, J. W., & Lee, J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13543 · Cited by 710
Peng, L., Hung, C.-T., Wang, S., Zhang, X., Zhu, X., Zhao, Z., Wang, C., Tang, Y., Li, W., & Zhao, D. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b02091 · Cited by 607
Li, C., Li, Q., Kaneti, Y. V., Hou, D., Yamauchi, Y., & Mai, Y. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00021c · Cited by 513
Self-citationPark, J., Lee, S., Kim, H., Cho, A., Kim, S., Ye, Y., Han, J. W., Lee, H., Jang, J. H., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201908122 · Cited by 480
Metal‐Nitrogen‐Doped Carbon Materials as Highly Efficient Catalysts: Progress and Rational Design
Shi, Z., Yang, W., Gu, Y., Liao, T., & Sun, Z. (2020) · Advanced Science · doi:10.1002/advs.202001069 · Cited by 470
Liu, X., Wang, L., Yu, P., Tian, C., Sun, F., Ma, J., Li, W., & Fu, H. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201809009 · Cited by 469
Single-Atom (Iron-Based) Catalysts: Synthesis and Applications
Singh, B., Gawande, M. B., Kute, A. D., Varma, R. S., Fornasiero, P., McNeice, P., Jagadeesh, R. V., Beller, M., & Zbořil, R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00158 · Cited by 373
Ultrathinning Nickel Sulfide with Modulated Electron Density for Efficient Water Splitting
Fei, B., Chen, Z., Liu, J., Xu, H., Yan, X., Qing, H., Chen, M., & Wu, R. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001963 · Cited by 372
Mesoporous Materials for Electrochemical Energy Storage and Conversion
Zu, L., Zhang, W., Qu, L., Liu, L., Li, W., Yu, A., & Zhao, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002152 · Cited by 366
Guo, J., Huo, J., Liu, Y., Wu, W., Wang, Y., Wu, M., Liu, H., & Wang, G. (2019) · Small Methods · doi:10.1002/smtd.201900159 · Cited by 326
Single-micelle-directed synthesis of mesoporous materials
Zhao, T., Elzatahry, A., Li, X., & Zhao, D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0144-x · Cited by 315
Densely Isolated FeN4 Sites for Peroxidase Mimicking
Jiao, L., Wu, J., Zhong, H., Zhang, Y., Xu, W., Wu, Y., Chen, Y., Yan, H., Zhang, Q., Gu, W., et al. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c01647 · Cited by 312
3D Graphene‐Based H2‐Production Photocatalyst and Electrocatalyst
Kuang, P., Sayed, M., Fan, J., Cheng, B., & Yu, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903802 · Cited by 302
Huang, X., Shen, T., Zhang, T., Qiu, H., Gu, X., Ali, Z., & Hou, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201900375 · Cited by 283
Hou, C., Zou, L., Wang, Y., & Xu, Q. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202011347 · Cited by 281
Ultra-dense carbon defects as highly active sites for oxygen reduction catalysis
Wu, Q., Jia, Y., Liu, Q., Mao, X., Guo, Q., Yan, X., Zhao, J., Liu, F., Du, A., & Yao, X. (2022) · Chem · doi:10.1016/j.chempr.2022.06.013 · Cited by 233
Synthesis of ordered mesoporous carbon by soft template method
Chauhan, S. (2023) · Materials Today: Proceedings · doi:10.1016/j.matpr.2021.04.257 · Cited by 34
Pedireddy, S., Jimenez‐Sandoval, R., Ravva, M. K., Nayak, C., Anjum, D. H., Jha, S. N., Katuri, K. P., & Saikaly, P. E. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010916 · Cited by 20
Metadata
- Authors
- Tan, H., Tang, J., Henzie, J., Li, Y., Xu, X., Chen, T., Wang, Z., Wang, J., Ide, Y., Bando, Y., & Yamauchi, Y.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-05-03
- Volume
- 12
- Issue
- 6
- Pages
- 5674-5683
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2800356477
- Cited by
- 301
- References
- 41
- FWCI
- 12.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.