The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Cerium Based Metal–Organic Frameworks as an Efficient Separator Coating Catalyzing the Conversion of Polysulfides for High Performance Lithium–Sulfur Batteries
Abstract
In this work, we demonstrate cerium (Ce) based metal–organic frameworks (MOFs) combined with carbon nanotubes (CNTs) to form Ce-MOF/CNT composites as separator coating material in the Li–S battery system, which showed excellent electrochemical performance even under high sulfur loading and much better capacity retention. At the sulfur loading of 2.5 mg/cm 2, initial specific capacity of 1021.8 mAh/g at 1C was achieved in the Li–S cell with the Ce-MOF-2/CNT coated separator, which was slowly reduced to 838.8 mAh/g after 800 cycles with a decay rate of only 0.022% and the Coulombic efficiency of nearly 100%. Even at a higher sulfur loading of 6 mg/cm 2, the cell based on Ce-MOF-2/CNT separator coating still exhibited excellent performance with initial specific capacity of 993.5 mAh/g at 0.1 C. After 200 cycles, the specific capacity of 886.4 mAh/g was still retained. The excellent performance is ascribed to the efficient adsorption of the Ce-MOF-2 to Li 2 S 6 species and its catalytic effect toward conversion of polysulfides, resulting in suppressed shuttle effect of polysulfides in the Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Applications of metal–organic frameworks in heterogeneous supramolecular catalysis
Liu, J., Chen, L., Cui, H., Zhang, J., Zhang, L., & Su, C.-Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00094c · Cited by 2,894
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Controlling guest conformation for efficient purification of butadiene
Liao, P.-Q., Huang, N.-Y., Zhang, W.-X., Zhang, J.-P., & Chen, X.-M. (2017) · Science · doi:10.1126/science.aam7232 · Cited by 751
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures
Demir-Cakan, R., Morcrette, M., Nouar, F., Davoisne, C., Devic, T., Gonbeau, D., Dominko, R., Serre, C., Férey, G., & Tarascon, J.-M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2062659 · Cited by 630
Metal–Organic‐Framework‐Based Catalysts for Photoreduction of CO2
Li, R., Zhang, W., & Zhou, K. (2018) · Advanced Materials · doi:10.1002/adma.201705512 · Cited by 584
Cited by
Recent progress on MOF‐derived carbon materials for energy storage
Ren, J., Huang, Y., Zhu, H., Zhang, B., Zhu, H., Shen, S., Tan, G., Wu, F., He, H., Lan, S., et al. (2020) · Carbon Energy · doi:10.1002/cey2.44 · Cited by 383
Li, S., Zhang, W., Zheng, J., Lv, M., Song, H., & Du, L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000779 · Cited by 373
Carbon nanotube-based materials for lithium–sulfur batteries
Zheng, M., Chi, Y., Hu, Q., Tang, H., Jiang, X., Zhang, L., Zhang, S., Pang, H., & Xu, Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05347f · Cited by 311
Engineering Oxygen Vacancies in a Polysulfide‐Blocking Layer with Enhanced Catalytic Ability
Li, Z., Zhou, C., Hua, J., Hong, X., Sun, C., Li, H., Xu, X., & Mai, L. (2020) · Advanced Materials · doi:10.1002/adma.201907444 · Cited by 292
Self-citationRechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Recent progress on electrolyte additives for stable lithium metal anode
Li, S., Luo, Z., Li, L., Hu, J., Zou, G., Hou, H., & Ji, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.008 · Cited by 256
Metadata
- Authors
- Hong, X.-J., Song, C.-L., Yang, Y., Tan, H.-C., Li, G.-H., Cai, Y.-P., & Wang, H.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-02-18
- Volume
- 13
- Issue
- 2
- Pages
- 1923-1931
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2914150116
- Cited by
- 301
- References
- 30
- FWCI
- 18.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.