The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
A General Atomic Surface Modification Strategy for Improving Anchoring and Electrocatalysis Behavior of Ti3C2T2 MXene in Lithium–Sulfur Batteries
Abstract
Multiple negative factors, including the poor electronic conductivity of sulfur, dissolution and shuttling of lithium polysulfides (Li 2 S n ), and sluggish decomposition of solid Li 2 S, seriously hinder practical applications of lithium–sulfur (Li–S) batteries. To solve these problems, a general strategy was proposed for enhancing the electrochemical performance of Li–S batteries using surface-functionalized Ti 3 C 2 MXenes. Functionalized Ti 3 C 2 T 2 (T = N, O, F, S, and Cl) showed metallic conductivity, as bare Ti 3 C 2 . Among all Ti 3 C 2 T 2 investigated, Ti 3 C 2 S 2, Ti 3 C 2 O 2, and Ti 3 C 2 N 2 offered moderate adsorption strength, which effectively suppressed Li 2 S n dissolution and shuttling. This Ti 3 C 2 T 2 exhibited effective electrocatalytic ability for Li 2 S decomposition. The Li 2 S decomposition barrier was significantly decreased from 3.390 eV to ∼0.4 eV using Ti 3 C 2 S 2 and Ti 3 C 2 O 2, with fast Li + diffusivity. Based on these results, O- and S-terminated Ti 3 C 2 were suggested as promising host materials for S cathodes. In addition, appropriate functional group vacancies could further promote anchoring and catalytic abilities of Ti 3 C 2 T 2 to boost the electrochemical performance of Li–S batteries. Moreover, the advantages of a Ti 3 C 2 T 2 host material could be well retained even at high S loading, suggesting the potential of surface-modified MXene for confining sulfur in Li–S battery cathodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
A climbing image nudged elastic band method for finding saddle points and minimum energy paths
Henkelman, G., Uberuaga, B. P., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1329672 · Cited by 21,620
First principles phonon calculations in materials science
Togo, A., & Tanaka, I. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.07.021 · Cited by 11,549
CALYPSO: A method for crystal structure prediction
Wang, Y., Lv, J., Zhu, L., & Ma, Y. (2012) · Computer Physics Communications · doi:10.1016/j.cpc.2012.05.008 · Cited by 2,897
Crystal structure prediction via particle-swarm optimization
Wang, Y., Lv, J., Zhu, L., & Ma, Y. (2010) · Physical Review B · doi:10.1103/physrevb.82.094116 · Cited by 2,747
Tang, Q., Zhou, Z., & Shen, P. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308463r · Cited by 2,254
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Self-citationTao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationSulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Zhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Prediction and Characterization of MXene Nanosheet Anodes for Non-Lithium-Ion Batteries
Xie, Y., Dall’Agnese, Y., Naguib, M., Gogotsi, Y., Barsoum, M. W., Zhuang, H. L., & Kent, P. R. C. (2014) · ACS Nano · doi:10.1021/nn503921j · Cited by 1,046
Self-citationLin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries
Li, Z., Zhang, J., Guan, B., Wang, D., Liu, L.-M., & Lou, X. W. (2016) · Nature Communications · doi:10.1038/ncomms13065 · Cited by 677
Self-citationSodium-Ion Intercalation Mechanism in MXene Nanosheets
Kajiyama, S., Szabova, L., Sodeyama, K., Iinuma, H., Morita, R., Gotoh, K., Tateyama, Y., Okubo, M., & Yamada, A. (2016) · ACS Nano · doi:10.1021/acsnano.5b06958 · Cited by 602
Song, Y., Zhao, W., Kong, L., Zhang, L., Zhu, X., Shao, Y., Ding, F., Zhang, Q., Sun, J., & Liu, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01402g · Cited by 539
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
A Two-Dimensional Porous Carbon-Modified Separator for High-Energy-Density Li-S Batteries
Pei, F., Lin, L., Fu, A., Mo, S., Ou, D., Fang, X., & Zheng, N. (2018) · Joule · doi:10.1016/j.joule.2017.12.003 · Cited by 442
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Transition Metal Dichalcogenide Atomic Layers for Lithium Polysulfides Electrocatalysis
Babu, G., Masurkar, N., Al Salem, H., & Arava, L. M. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08681 · Cited by 386
Ling, C., Shi, L., Ouyang, Y., Chen, Q., & Wang, J. (2016) · Advanced Science · doi:10.1002/advs.201600180 · Cited by 367
Yu, M., Ma, J., Song, H., Wang, A., Tian, F., Wang, Y., Qiu, H., & Wang, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03902a · Cited by 345
Enhanced Li‐Ion Accessibility in MXene Titanium Carbide by Steric Chloride Termination
Kajiyama, S., Szabova, L., Iinuma, H., Sugahara, A., Gotoh, K., Sodeyama, K., Tateyama, Y., Okubo, M., & Yamada, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601873 · Cited by 331
Single-atom catalyst boosts electrochemical conversion reactions in batteries
Wang, J., Jia, L., Zhong, J., Xiao, Q., Wang, C., Zang, K., Liu, H., Zheng, H., Luo, J., Yang, J., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.09.006 · Cited by 315
Cheng, Z., Xiao, Z., Pan, H., Wang, S., & Wang, R. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702337 · Cited by 285
Copper‐Stabilized Sulfur‐Microporous Carbon Cathodes for Li–S Batteries
Zheng, S., Yi, F., Li, Z., Zhu, Y., Xu, Y., Luo, C., Yang, J., & Wang, C. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304156 · Cited by 217
Wang, D., Gao, Y., Liu, Y., Jin, D., Gogotsi, Y., Meng, X., Du, F., Chen, G., & Wei, Y. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b03057 · Cited by 212
Self-citationLi, H., Ma, S., Cai, H., Zhou, H., Huang, Z., Hou, Z., Wu, J., Yang, W., Yi, H., Fu, C., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.08.016 · Cited by 172
Ferromagnetic Nanoparticle–Assisted Polysulfide Trapping for Enhanced Lithium–Sulfur Batteries
Gao, Z., Schwab, Y., Zhang, Y., Song, N., & Li, X. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800563 · Cited by 160
S-functionalized MXenes as electrode materials for Li-ion batteries
Zhu, J.-J., Chroneos, A., Eppinger, J., & Schwingenschlögl, U. (2016) · Applied Materials Today · doi:10.1016/j.apmt.2016.07.005 · Cited by 107
Mechanism of polysulfide immobilization on defective graphene sheets with N-substitution
Rao, D., Wang, Y., Zhang, L., Yao, S., Qian, X., Xi, X., Xiao, K., Deng, K., Shen, X., & Lu, R. (2016) · Carbon · doi:10.1016/j.carbon.2016.09.021 · Cited by 102
P and Si functionalized MXenes for metal-ion battery applications
Zhu, J., & Schwingenschlögl, U. (2017) · 2D Materials · doi:10.1088/2053-1583/aa69fe · Cited by 80
Cited by
Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes
Kamysbayev, V., Filatov, A. S., Hu, H., Rui, X., Lagunas, F., Wang, D., Klie, R. F., & Talapin, D. V. (2020) · Science · doi:10.1126/science.aba8311 · Cited by 1,703
Self-citationMXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Self-citationA fundamental look at electrocatalytic sulfur reduction reaction
Peng, L., Wei, Z., Wan, C., Li, J., Chen, Z., Zhu, D., Baumann, D., Liu, H., Allen, C. S., Xu, X., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-0498-x · Cited by 841
MXenes for Rechargeable Batteries Beyond the Lithium‐Ion
Ming, F., Liang, H., Huang, G., Bayhan, Z., & Alshareef, H. N. (2021) · Advanced Materials · doi:10.1002/adma.202004039 · Cited by 424
A review on theoretical models for lithium–sulfur battery cathodes
Feng, S., Fu, Z., Chen, X., & Zhang, Q. (2022) · InfoMat · doi:10.1002/inf2.12304 · Cited by 354
Metadata
- Authors
- Wang, D., Li, F., Lian, R., Xu, J., Kan, D., Liu, Y., Chen, G., Gogotsi, Y., & Wei, Y.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-08-30
- Volume
- 13
- Issue
- 10
- Pages
- 11078-11086
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2970755273
- Cited by
- 385
- References
- 43
- FWCI
- 15.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.