Ultrafast Photodetector by Integrating Perovskite Directly on Silicon Wafer
The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
Single-crystal (SC) perovskite is currently a promising material due to its high quantum efficiency and long diffusion length. However, the reported perovskite photodetection range (<800 nm) and response time (>10 μs) are still limited. Here, to promote the development of perovskite-integrated optoelectronic devices, this work demonstrates wider photodetection range and shorter response time perovskite photodetector by integrating the SC CH 3 NH 3 PbBr 3 (MAPbBr 3 ) perovskite on silicon (Si). The Si/MAPbBr 3 heterojunction photodetector with an improved interface exhibits high-speed, broad-spectrum, and long-term stability performances. To the best of our knowledge, the measured detectable spectrum (405–1064 nm) largely expands the widest response range reported in previous perovskite-based photodetectors. In addition, the rise time is as fast as 520 ns, which is comparable to that of commercial germanium photodetectors. Moreover, the Si/MAPbBr 3 device can maintain excellent photocurrent performance for up to 3 months. Furthermore, typical gray scale face imaging is realized by scanning the Si/MAPbBr 3 single-pixel photodetector. This work using an ultrafast photodetector by directly integrating perovskite on Si can promote advances in next-generation integrated optoelectronic technology.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Despite the good progress in this area [18,19], the large lattice mismatch between perovskite and silicon affects the carrier transport, the performance of the devices is yet to be further improved.”
From High-quality silicon-based perovskite photodetectors with the detectivity exceeding 7.5 × 10 13 Jones (2024) · cites this paper as [19]
Citations
Cites
From few to many: illumination cone models for face recognition under variable lighting and pose
Georghiades, A. S., Belhumeur, P. N., & Kriegman, D. J. (2001) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.927464 · Cited by 4,912
Solution-processed hybrid perovskite photodetectors with high detectivity
Dou, L., Yang, Y., You, J., Hong, Z., Chang, W.-H., Li, G., & Yang, Y. (2014) · Nature Communications · doi:10.1038/ncomms6404 · Cited by 2,765
Self-citationDevice Requirements for Optical Interconnects to Silicon Chips
Miller, D. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2014298 · Cited by 1,966
Saidaminov, M. I., Abdelhady, A. L., Murali, B., Alarousu, E., Burlakov, V. M., Peng, W., Dursun, I., Wang, L., He, Y., Maculan, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms8586 · Cited by 1,922
Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals
Wei, H., Fang, Y., Mulligan, P., Chuirazzi, W., Fang, H.-H., Wang, C., Ecker, B. R., Gao, Y., Loi, M. A., Cao, L., et al. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.41 · Cited by 1,877
Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination
Fang, Y., Dong, Q., Shao, Y., Yuan, Y., & Huang, J. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.156 · Cited by 1,470
Two‐Inch‐Sized Perovskite CH3NH3PbX3 (X = Cl, Br, I) Crystals: Growth and Characterization
Liu, Y., Yang, Z., Cui, D., Ren, X., Sun, J., Liu, X., Zhang, J., Wei, Q., Fan, H., Yu, F., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502597 · Cited by 1,123
All-optical high-speed signal processing with silicon–organic hybrid slot waveguides
Koos, C., Vorreau, P., Vallaitis, T., Dumon, P., Bogaerts, W., Baets, R., Esembeson, B., Biaggio, I., Michinobu, T., Diederich, F., et al. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.25 · Cited by 914
High‐Performance Perovskite–Graphene Hybrid Photodetector
Lee, Y., Kwon, J., Hwang, E., Ra, C., Yoo, W. J., Ahn, J., Park, J. H., & Cho, J. H. (2015) · Advanced Materials · doi:10.1002/adma.201402271 · Cited by 861
Wei, W., Zhang, Y., Xu, Q., Wei, H., Fang, Y., Wang, Q., Deng, Y., Li, T., Gruverman, A., Cao, L., et al. (2017) · Nature Photonics · doi:10.1038/nphoton.2017.43 · Cited by 814
Research works printed but not linked: 1
- 10.1063/1.4971772 · DOI · Paper page
Cited by
Items 101–136 of 136
Jahangir, I., Uddin, M. A., Franken, A., Singh, A. K., & Koley, G. (2021) · Nanotechnology · doi:10.1088/1361-6528/ac171a · Cited by 4
“In table 1, we have compared the fi gure-of-merit parameters of our work with other recently published studies [ 15, 63 – 69 ] .”
Heteroepitaxy of Large-Area, Monocrystalline Lead Halide Perovskite Films on Gallium Arsenide
Kong, D., Zhang, Y., Cheng, D., Wang, E., Zhang, K., Wang, H., Liu, K., Yin, L., & Sheng, X. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c15243 · Cited by 4
Wu, L., Zhang, M., Shi, X., Hu, P., Yu, H., & Teng, F. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3402118 · Cited by 5
“…MoS 2 [2], PbS [3], [4], MoTe 2 [5], InSb, HgCdTe [6], [7] Te [8], and silicon, and the commonly used materials in experimental research include Se, ZnO [9], [10], [11], [12], SnO 2 , black phosphorus [13], [14], perovskite [15], [16], [17], [18] transition metal disulfide compounds [19], [20].”
BackgroundSelection of contact materials to p-type halide perovskite by electronegativity matching
Long, R., Li, B., & Mi, Q. (2020) · AIP Advances · doi:10.1063/5.0008406 · Cited by 4
Sun, Y., Liu, Z., Ma, J., Liu, X., Cong, R., Zhou, Q. S., Dai, W., Teng, X., Gao, C., Yu, W. D., et al. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.170925 · Cited by 3
A minireview on technology and application of silicon integrated single crystal perovskite
Weng, J., Cai, M., Pan, X., & Li, X. (2025) · Journal of Semiconductors · doi:10.1088/1674-4926/25040012 · Cited by 3
Xiao, X., Wang, Y., 卞, 靖., Wang, H., Wang, Y., 徐, J. 金. X., & Chen, J. (2026) · Advanced Science · doi:10.1002/advs.202523110 · Cited by 3
“According to equation f 3dB = 0.35/ τ rise , where τ rise is the response time of the device, the intrinsic 3 dB bandwidth can be calculated to be 193 kHz [ 60 ].”
InfluentialThe surface oxidation effect on photocurrent in WSe1.95Te0.05 nanosheets
Huang, S., Tu, T.-Y., Wang, P.-C., Chou, M. M. C., Li, C.-Y., Wu, H., Hsieh, Y.-C., & Chen, R. (2024) · iScience · doi:10.1016/j.isci.2024.111461 · Cited by 3
Ding, D., Sun, Y., Li, W., Sun, Y., Cong, R., Wang, Z., Gao, C., & Yu, W. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155050 · Cited by 3
Lin, Z., Liu, M., Cao, Y., Hao, Y., Wang, Z., Zeng, R., Liu, M., Wei, G., Wang, P., & Qiao, Z. (2024) · Surfaces and Interfaces · doi:10.1016/j.surfin.2024.105300 · Cited by 3
Nanostructure Semiconductor Materials for Device Applications
Kamalabadi, M., Dashtian, K., Afkhami, A., Madrakian, T., & Ghoorchian, A. (2022) · Materials horizons · doi:10.1007/978-981-16-8391-6_4 · Cited by 6
Substrate engineering in the growth of perovskite crystalsPreprint
Deng, Y. (2020) · Ghent University Academic Bibliography (Ghent University) · doi:10.48550/arxiv.2010.04422 · Cited by 3
Mastalieva, V., Yakubova, A., Baeva, M., Neplokh, V. V., Mitin, D. M., Fedorov, V. V., Goltaev, A. S., Mozharov, A. M., Kochetkov, F. M., Toikka, A. S., et al. (2025) · Journal of Semiconductors · doi:10.1088/1674-4926/24120010 · Cited by 2
Si/Perovskite Heterojunction for Photodetector Application
Abbasi, A. K., Sengupta, S., Jain, V. K., & Grover, R. (2025) · Journal of Electronic Materials · doi:10.1007/s11664-025-12506-1 · Cited by 2
“17 The surface morphology of perovskite film on silicon substrates was analyzed using SEM micrographs.”
InfluentialLi, X., Tang, J., Jia, R., Wang, X., Chang, C., Chang, H., Tian, X., Zhang, M., Chen, J., Lin, C. J., et al. (2026) · ACS Photonics · doi:10.1021/acsphotonics.5c02722 · Cited by 2
Enhanced On–Off Ratio for Ni(OH)2·0.75H2O-MAPbBr3-Based Photodetectors
Huang, Q. J., Xu, Y., Peng, G., Cai, K., Zhou, F., Jin, Z., & Wang, Y. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c00167 · Cited by 2
A self-power photodetector based on controlled growth of single crystal MAPbBr3/WO3 heterojunction
Yao, J., Zhang, H., Lu, J., Yang, L., Liu, D., Hu, Y., Zeng, W. D., Gui, P., Chen, Z., & Ren, X. (2023) · Science China Technological Sciences · doi:10.1007/s11431-022-2383-x · Cited by 3
“Soon after, Geng et al. [26] demonstrated per-ovskite SC/silicon heterojunction PDs with a broader pho-todetection range and faster response time.”
BackgroundSelf-citationThe effects of strain and interface engineering on the PbS/PbSe/CsPbI3 heterojunction
Lin, Z., Liu, M., Wang, P., Cao, Y., Hao, Y., & Qiao, Z. (2024) · Physica Scripta · doi:10.1088/1402-4896/ad964a · Cited by 1
A-site composition tuning in methylammonium-based metal halide perovskite colloidal nanocrystals
Mondal, S., Sharma, G., Bhoi, S., Wadepalli, S., Santra, P. K., Saha, D., & Hazarika, A. (2024) · Nanoscale · doi:10.1039/d4nr03422h · Cited by 1
Polaron optical absorption effect in perovskite quantum dot materials
Shuang, F. E. N. G., Haonan, M. A., Bai, J. Y., Ma, X.-J., & Sun, Y. Q. (2025) · Acta Physica Sinica · doi:10.7498/aps.74.20250105 · Cited by 1
Single-crystal metal halide perovskite-based photodetectors
Mahapatra, A. (2025) · Royal Society of Chemistry eBooks · doi:10.1039/9781837677481-00254 · Cited by 1
Experimental study on terahertz optical modulation characteristics of quartz-based MAPbI3 thin films
Wang, H., Ling, F., Xiao, Y., Yue, J., Luo, C., Chang, Z., Liu, J., Xu, Z., Wu, X., & Yao, J. (2021) · International Symposium on Ultrafast Phenomena and Terahertz Waves (ISUPTW) · doi:10.1117/12.2603901 · Cited by 1
Guo, S., Qiao, S., Ma, J., Liu, J., Fu, G., & Wang, S. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4003177
Nie, W., Liu, J., Yan, L., Hu, H., Lin, P., Liu, C., Xu, L., Wang, P., Wu, X., & Cui, C. (2024) · Physica Scripta · doi:10.1088/1402-4896/ad4d25
Hydrogen impurity effect of polaron in perovskite quantum wells
Zhang, Y.-M., Bai, J. Y., Zhang, X.-X., Zhang, X., Ma, X.-J., & Sun, Y. (2025) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2025.113308
Space limited growth of MAPbBr 3 -Si heterojunction narrowband photodetector
Hu, H., Yang, J., Chen, J., Liu, C., Zhang, Y., Lin, P., Xu, L., Wang, P., Wu, X., & Cui, C. (2025) · Physica Scripta · doi:10.1088/1402-4896/ae1eb0
Kim, J., Kim, H., Yun, S., Kubota, Y., Matsushita, N., Lee, G., & Hong, J. (2026) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c02534
Baek, S., Jeong, H. W., Na, H., Kim, A., Choi, S., Lee, J. W., Lee, S. J., Choi, S., & Lee, J. (2026) · Materials Horizons · doi:10.1039/d5mh02052b
IN-DEPTH NUMERICAL EVALUATION AND PERFORMANCE OPTIMIZATION OF CMTS PHOTODETECTOR
Yasin, S., Waar, Z. A., Christopoulos, S., & Moustafa, M. (2026) · Ukrainian Journal of Physical Optics · doi:10.3116/16091833/ukr.j.phys.opt.2026.02058
Heterojunctions and silicon/perovskite tandem solar cells
Bojar, A. (2021) · theses.fr (ABES) · doi:10.70675/8b2233c2zbe53z459azbfeaz288357cd0f0c · Cited by 1
Silicon Nanowire/Perovskite Heterojunction-Based Photodetector
Abbasi, A. K., Aggarwal, R., Sengupta, S., & Grover, R. (2026) · Lecture notes in electrical engineering · doi:10.1007/978-981-95-3305-3_4
Yang, X., Huang, Y.-H., Zhang, Q., Wang, X.-D., & Kuang, D. (2026) · Nanoscale · doi:10.1039/d6nr00551a
Wu, X., Sun, C., Li, L., Chen, J., Chen, Y., & Zhong, H. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c07964
Jia, X., Jiao, S., Shang, H., Jin, Y., Shi, Z., Ge, M., Wang, P., He, J., Tashpulatov, K., Wang, D., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.77457
Li, Y., Li, X., Chen, Y., & Shen, G. (2026) · Nano-Micro Letters · doi:10.1007/s40820-026-02335-0
Self-citationDewale, P. D., Hong, Y., & Dey, N. (2026) · Materials Today Chemistry · doi:10.1016/j.mtchem.2026.104055
Metadata
- Authors
- Geng, X., Wang, F., Tian, H., Feng, Q., Zhang, H., Liang, R., Shen, Y., Ju, Z., Gou, G.-Y., Deng, N., Li, Y.-T., Ren, J., Xie, D., Yang, Y., & Ren, T.-L.
- Affiliations
- Institute of Microelectronics (CN)
- Tsinghua University (CN)
- Institute of Microelectronics and Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
- Corresponding author
- Tian, He
- Liang, Renrong
- Yang, Yi
- Ren, Tian-Ling
- ORCID
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-06
- Volume
- 14
- Issue
- 3
- Pages
- 2860-2868
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3004497030
- Cited by
- 136
- References
- 54
- Citations by year
- 2026: 11 · 2025: 14 · 2024: 27 · 2023: 21 · 2022: 32 · 2021: 21 · 2020: 10
- FWCI
- 7.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Science and Technology of the People's Republic of China (2015CB352101, 2016YFA0200300, 2016YFA0200400)
- Ministry of Agriculture of the People's Republic of China (201303107)
- Tsinghua University (2014Z01006)
- China Academy of Space Technology (2018QNRC001)
- National Natural Science Foundation (51861145202, 61434001, 61574083, 61874065)
- Shenzhen Science and Technology Program (JCYJ20150831192224146)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Semiconductor Detectors and Materials
- Keywords
- perovskite photodetectors, MAPbBr3, perovskite single crystals, ultrafast response time, long-term device stability, single-pixel imaging, integrated optoelectronics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.