The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
3D Printing of Additive-Free 2D Ti3C2Tx (MXene) Ink for Fabrication of Micro-Supercapacitors with Ultra-High Energy Densities
Abstract
Recent advances in the development of self-powered devices and miniaturized electronics have increased the demand for on-chip energy storage devices that can deliver high power and energy densities in a limited footprint area. Here, we report the fabrication of all-solid-state micro-supercapacitors (MSCs) through a three-dimensional (3D) printing of additive-free and water-based MXene ink. The fabricated MSCs benefit from the high electrical conductivity and excellent electrochemical properties of two-dimensional (2D) Ti 3 C 2 T x MXene and a 3D interdigital electrode architecture to deliver high areal and volumetric energy densities. We demonstrate that a highly concentrated MXene ink shows desirable viscoelastic properties for extrusion printing at room temperature and therefore can be used for scalable fabrication of MSCs with various architectures and electrode thicknesses on a variety of substrates. The developed printing process can be readily used for the fabrication of flexible MSCs on polymer and paper substrates. The printed solid-state devices show exceptional electrochemical performance with very high areal capacitance of up to ∼1035 mF cm –2 . Our study introduces Ti 3 C 2 T x MXene as an excellent choice of electrode material for the fabrication of 3D MSCs and demonstrates 3D printing of MXene inks at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Ultrahigh-power micrometre-sized supercapacitors based on onion-like carbon
Pech, D., Brunet, M., Durou, H., Huang, P., Mochalin, V., Gogotsi, Y., Taberna, P.-L., & Simon, P. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.162 · Cited by 2,721
True Performance Metrics in Electrochemical Energy Storage
Gogotsi, Y., & Simon, P. (2011) · Science · doi:10.1126/science.1213003 · Cited by 2,440
Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
New Two-Dimensional Niobium and Vanadium Carbides as Promising Materials for Li-Ion Batteries
Naguib, M., Halim, J., Lu, J., Cook, K. M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405735d · Cited by 2,150
Cited by
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
3D MXene Architectures for Efficient Energy Storage and Conversion
Li, K., Liang, M., Wang, H., Wang, X., Huang, Y., Coelho, J., Pinilla, S., Zhang, Y., Qi, F., Nicolosi, V., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000842 · Cited by 498
Bai, Y., Liu, C., Chen, T., Li, W., Zheng, S., Pi, Y., Luo, Y., & Pang, H. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202112381 · Cited by 455
MXene Printing and Patterned Coating for Device Applications
Zhang, Y., Wang, Y., Jiang, Q., El‐Demellawi, J. K., Kim, H., & Alshareef, H. N. (2020) · Advanced Materials · doi:10.1002/adma.201908486 · Cited by 449
Abdolhosseinzadeh, S., Schneider, R., Verma, A., Heier, J., Nüesch, F., & Zhang, C. (. (2020) · Advanced Materials · doi:10.1002/adma.202000716 · Cited by 406
Perspectives on solution processing of two-dimensional MXenes
Abdolhosseinzadeh, S., Jiang, X., Zhang, H., Qiu, J., & Zhang, C. (. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.010 · Cited by 386
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
3D Printing of Multilayered and Multimaterial Electronics: A Review
Goh, G. L., Zhang, H., Chong, T. H., & Yeong, W. Y. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100445 · Cited by 319
Zhu, Q., Li, J., Simon, P., & Xu, B. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.035 · Cited by 318
Shah, S. S., Niaz, F., Ehsan, M. A., Das, H. T., Younas, M., Khan, A. S., Rahman, H. U., Nayem, S. M. A., Oyama, M., & Aziz, M. A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110152 · Cited by 317
Zheng, S., Wang, H., Das, P., Zhang, Y., Cao, Y., Ma, J., Liu, S. (., & Wu, Z. (2021) · Advanced Materials · doi:10.1002/adma.202005449 · Cited by 300
Progress in 3D-MXene Electrodes for Lithium/Sodium/Potassium/Magnesium/Zinc/Aluminum-Ion Batteries
Bashir, T., Zhou, S., Yang, S., Ismail, S. A., Ali, T., Wang, H., Zhao, J., & Gao, L. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00174-2 · Cited by 284
Direct ink writing of energy materials
Tagliaferri, S., Panagiotopoulos, A., & Mattevi, C. (2021) · Materials Advances · doi:10.1039/d0ma00753f · Cited by 281
Direct synthesis of metastable phases of 2D transition metal dichalcogenides
Sokolikova, M. S., & Mattevi, C. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00143k · Cited by 261
Chang, X., Wu, Q., Wu, Y., Xi, X., Cao, J., Chu, H., Liu, Q., Li, Y., Wu, W., Fang, X., et al. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c03260 · Cited by 109
Metadata
- Authors
- Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-12-31
- Volume
- 14
- Issue
- 1
- Pages
- 640-650
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2997898516
- Cited by
- 443
- References
- 60
- FWCI
- 16.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.