The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Rational Design of a Ni3N0.85 Electrocatalyst to Accelerate Polysulfide Conversion in Lithium–Sulfur Batteries
Open accessAbstract
Slow kinetics of polysulfide conversion reactions lead to severe issues for lithium–sulfur (Li–S) batteries, for example, low rate capability, polysulfide migration, and low Coulombic efficiencies. These challenges hinder the practical applications of Li–S batteries. In this study, we proposed a rational strategy of tuning the d-band of catalysts to accelerate the conversion of polysulfides. Nitrogen vacancies were engineered in hexagonal Ni 3 N (space group P 6 3 22) to tune its d-band center, leading to the strong interaction between polysulfides and Ni 3 N. Because of the greater electron population in the lowest occupied molecular orbital of Li 2 S 4, the terminal S–S bonds were weakened for breaking. Temperature-dependent experiments confirm that Ni 3 N 0.85 demonstrates a much low activation energy, thereby accelerating the conversion of polysulfides. A Li–S cell using Ni 3 N 0.85 can deliver a high initial discharge capacity of 1445.9 mAh g –1 (at 0.02 C) and low decay per cycle (0.039%). The Ni 3 N 0.85 cell can also demonstrate an initial capacity of 1200.4 mAh g –1 for up to 100 cycles at a high loading of 5.2 mg cm –2 . The high efficiency of rationally designed Ni 3 N 0.85 demonstrates the effectiveness of the d-band tuning strategy to develop low-activation-energy catalysts and to promote the atomic understanding of polysulfide conversion in Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Semiempirical GGA‐type density functional constructed with a long‐range dispersion correction
Grimme, S. (2006) · Journal of Computational Chemistry · doi:10.1002/jcc.20495 · Cited by 31,038
First principles methods using CASTEP
Clark, S. J., Segall, M. D., Pickard, C. J., Hasnip, P. J., Probert, M. I. J., Refson, K., & Payne, M. C. (2005) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.220.5.567.65075 · Cited by 14,633
Dronskowski, R., & Bloechl, P. E. (1993) · The Journal of Physical Chemistry · doi:10.1021/j100135a014 · Cited by 4,692
Theoretical surface science and catalysis—calculations and concepts
Hammer, B., & Nørskov, J. K. (2000) · Advances in Catalysis · doi:10.1016/s0360-0564(02)45013-4 · Cited by 3,972
LOBSTER: A tool to extract chemical bonding from plane‐wave based DFT
Maintz, S., Deringer, V. L., Tchougréeff, A. L., & Dronskowski, R. (2016) · Journal of Computational Chemistry · doi:10.1002/jcc.24300 · Cited by 3,706
Crystal Orbital Hamilton Population (COHP) Analysis As Projected from Plane-Wave Basis Sets
Deringer, V. L., Tchougréeff, A. L., & Dronskowski, R. (2011) · The Journal of Physical Chemistry A · doi:10.1021/jp202489s · Cited by 3,328
An updated version of wannier90: A tool for obtaining maximally-localised Wannier functions
Mostofi, A. A., Yates, J. R., Pizzi, G., Lee, Y.-S., Souza, I., Vanderbilt, D., & Marzari, N. (2014) · Computer Physics Communications · doi:10.1016/j.cpc.2014.05.003 · Cited by 2,474
Maintz, S., Deringer, V. L., Tchougréeff, A. L., & Dronskowski, R. (2013) · Journal of Computational Chemistry · doi:10.1002/jcc.23424 · Cited by 1,774
Plasma-Assisted Synthesis of NiCoP for Efficient Overall Water Splitting
Liang, H., Gandi, A. N., Anjum, D. H., Wang, X., Schwingenschlögl, U., & Alshareef, H. N. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03803 · Cited by 1,237
Metallic Nickel Nitride Nanosheets Realizing Enhanced Electrochemical Water Oxidation
Xu, K., Chen, P., Li, X., Tong, Y., Ding, H., Wu, X., Chu, W., Peng, Z., Wu, C., & Xie, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5119495 · Cited by 1,115
Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries
Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Deciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry
Zhou, J., Liu, X., Zhu, L., Zhou, J., Guan, Y., Chen, L., Niu, S., Cai, J., Sun, D., Zhu, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.010 · Cited by 548
Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering
Wang, Y., Zhang, R., Chen, J., Wu, H., Lu, S., Wang, K., Li, H., Harris, C. J., Xi, K., Kumar, R. V., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900953 · Cited by 447
A Review of Functional Binders in Lithium–Sulfur Batteries
Yuan, H., Huang, J., Peng, H., Titirici, M., Xiang, R., Chen, R., Liu, Q., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802107 · Cited by 438
Zhong, Y., Chao, D., Deng, S., Zhan, J., Fang, R., Xia, Y., Wang, Y., Wang, X., Xia, X., & Tu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706391 · Cited by 428
Yao, Y., Wang, H., Yang, H., Zeng, S., Xu, R. C., Liu, F., Shi, P., Feng, Y., Wang, K., Yang, W., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905658 · Cited by 414
Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance
Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369
Self-citationZhao, M., Peng, H., Zhang, Z., Li, B., Chen, X., Xie, J., Chen, X., Wei, J., Zhang, Q., & Huang, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812062 · Cited by 364
Self-citationZhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Self-citationWang, Z., Shen, J., Liu, J., Xu, X., Liu, Z., Hu, R., Yang, L., Feng, Y., Liu, J., Shi, Z., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902228 · Cited by 309
Chen, Y., Zhang, W., Zhou, D., Tian, H., Su, D., Wang, C., Stockdale, D., Kang, F., Li, B., & Wang, G. (2019) · ACS Nano · doi:10.1021/acsnano.9b01079 · Cited by 257
Wang, Z., Wang, L., Liu, S., Li, G., & Gao, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901051 · Cited by 234
Liu, B., He, B., Peng, H., Zhao, Y., Cheng, J., Xia, J., Shen, J., Ng, T., Meng, X., Lee, C., et al. (2018) · Advanced Science · doi:10.1002/advs.201800406 · Cited by 226
Self-citationBabu, G., Ababtain, K., Ng, K. Y. S., & Arava, L. M. R. (2015) · Scientific Reports · doi:10.1038/srep08763 · Cited by 209
Shen, Z., Cao, M., Zhang, Z., Pu, J., Zhong, C., Li, J., Ma, H., Li, F., Zhu, J., Pan, F., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906661 · Cited by 188
Self-citationSulfur Nanodots Electrodeposited on Ni Foam as High-Performance Cathode for Li–S Batteries
Zhao, Q., Hu, X., Zhang, K., Zhang, N., Hu, Y., & Chen, J. (2015) · Nano Letters · doi:10.1021/nl504263m · Cited by 185
Li, Q., Zou, X., Ai, X., Chen, H., Sun, L., & Zou, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803369 · Cited by 175
Luo, L., Chung, S., Asl, H. Y., & Manthiram, A. (2018) · Advanced Materials · doi:10.1002/adma.201804149 · Cited by 153
Yan, Y., Cheng, C., Zhang, L., Li, Y., & Lu, J. B. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900148 · Cited by 144
Self-citationYuan, Y., & Lu, J. B. (2019) · Carbon Energy · doi:10.1002/cey2.12 · Cited by 135
Self-citationWu, W., Pu, J., Wang, J., Shen, Z., Tang, H., Deng, Z., Tao, X., Pan, F., & Zhang, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702373 · Cited by 120
Self-citationYu, Q., Lu, Y. M., Luo, R., Liu, X., Huo, K., Kim, J., He, J. H., & Luo, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804520 · Cited by 96
In‐situ structural characterizations of electrochemical intercalation of graphite compounds
Li, N., & Su, D. (2019) · Carbon Energy · doi:10.1002/cey2.21 · Cited by 84
Anion vacancy-mediated ferromagnetism in atomic-thick Ni3N nanosheets
Xia, B., Wang, T., Chi, X., Yu, X., Liu, P., Zhang, J., Xi, S., Du, Y., & Gao, D. (2017) · Applied Physics Letters · doi:10.1063/1.5016326 · Cited by 14
Cited by
Cation-doped ZnS catalysts for polysulfide conversion in lithium–sulfur batteries
Shen, Z., Jin, X., Tian, J., Li, M., Yuan, Y., Zhang, S., Fang, S., Fan, X., Xu, W., Lu, H., et al. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00804-4 · Cited by 621
Self-citationEmerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Defect Engineering for Expediting Li–S Chemistry: Strategies, Mechanisms, and Perspectives
Shi, Z., Li, M., Sun, J., & Chen, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100332 · Cited by 269
Self-citationNi 3 N–CeO 2 Heterostructure Bifunctional Catalysts for Electrochemical Water Splitting
Ding, X., Jiang, R., Wu, J., Xing, M., Qiao, Z., Zeng, X., Wang, S., & Cao, D. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202306786 · Cited by 255
Metadata
- Authors
- Shen, Z., Zhang, Z., Li, M., Yuan, Y., Zhao, Y., Zhang, S., Zhong, C., Zhu, J., Lu, J., & Zhang, H.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-05-28
- Volume
- 14
- Issue
- 6
- Pages
- 6673-6682
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3031982140
- Cited by
- 305
- References
- 36
- FWCI
- 16.54
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.